Dodge Durango (HB). Manual — part 1402
INSTALLATION
1. Before proceeding with the following repair proce-
dure, review all warnings and cautions. (Refer to
23 - BODY/INSTRUMENT PANEL - WARNING)
2. Connect the electrical connectors.
3. Install the center bezel (1) and install the two
screws (2).
HB
INSTRUMENT PANEL
23 - 121
INTERIOR
TABLE OF CONTENTS
page
page
PANEL-A PILLAR TRIM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
. . . . . . . . . . . . . . . . . . . . . . . . 123
PANEL-B PILLAR TRIM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
. . . . . . . . . . . . . . . . . . . . . . . . 124
PANEL-C PILLAR TRIM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
. . . . . . . . . . . . . . . . . . . . . . . . 127
PANEL-D PILLAR TRIM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
. . . . . . . . . . . . . . . . . . . . . . . . 129
PANEL-QUARTER GLASS INTERIOR TRIM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
. . . . . . . . . . . . . . . . . . . . . . . . 130
PANEL-QUARTER TRIM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
. . . . . . . . . . . . . . . . . . . . . . . . 132
PANEL-REAR HEADER TRIM
. . . . . . . . . . . . . . . . . . . . . . . . 133
HEADLINER
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
. . . . . . . . . . . . . . . . . . . . . . . . 135
PLATE-DOOR SCUFF
. . . . . . . . . . . . . . . . . . . . . . . . 136
PANEL-COWL SIDE TRIM
. . . . . . . . . . . . . . . . . . . . . . . . 137
PLATE-LIFTGATE SCUFF
. . . . . . . . . . . . . . . . . . . . . . . . 138
CONSOLE-FLOOR
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
. . . . . . . . . . . . . . . . . . . . . . . . 139
CARPET
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
. . . . . . . . . . . . . . . . . . . . . . . . 141
MIRROR-INSIDE REARVIEW
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
INSTALLATION - REARVIEW MIRROR
INSTALLATION - REARVIEW MIRROR
SUPPORT BRACKET . . . . . . . . . . . . . . . . . . 143
PANEL-A PILLAR TRIM
REMOVAL
1. Using a small flat bladed tool or equivalent open
the trim plugs (2) in the a-pillar grab handle and
remove the bolts (3).
2. Remove the a-pillar trim panel (1).
23 - 122
INTERIOR
HB
INSTALLATION
1. Position the a-pillar trim (1) into place and seat the
retaining clips fully.
2. Install the bolts and tighten to 6 N·m (55 in. lbs.).
PANEL-B PILLAR TRIM
REMOVAL
1. Using a small flat bladed tool or equivalent open
the trim plugs (1) in the grab handle and remove
the bolts (2).
HB
INTERIOR
23 - 123
2. Remove the shoulder belt anchor bolt (3) and sep-
arate the upper trim panel (2) at the bottom and off
the hook (1) at the top.
3. Using a trim stick C-4755 or equivalent, remove the
door sill scuff plates. (Refer to 23 - BODY/INTERI-
OR/DOOR SILL SCUFF PLATE - DESCRIPTION)
4. Remove the bolts and remove the lower b-pillar
trim.
INSTALLATION
1. Position the shoulder belt through the upper slot in
the trim.
2. Install the trim panel and install the bolts.
3. Position the door sill scuff plates and seat the clips
fully. (Refer to 23 - BODY/INTERIOR/DOOR SILL
SCUFF PLATE - DESCRIPTION)
23 - 124
INTERIOR
HB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст