Dodge Durango (HB). Manual — part 1415
5. With pin (1) released from the retaining tabs, tap
pin out of the spring (2) and remove.
6. Twist the seat cushion assembly up and out of the
outboard hinge (1) and disengage from the inner
hinge (2) and remove seat.
7. Remove the seat cushion cover and foam from the
seat frame.
INSTALLATION
Center
1. Connect the j-straps (1 & 2).
HB
SEATS
23 - 173
2. Install the seat belt anchor (1) and four cushion
bolts (2).
3. Install the side shields.
Outer
1. Install the seat cushion/cover over the seat frame.
2. Position the seat cushion assembly into the vehicle
and engage inboard hinge (2).
3. Rotate seat down and engage the outboard hinge
(1).
4. Insert the hinge spring (1) and insert the pin (2).
23 - 174
SEATS
HB
5. Turn the hinge pin (3) and engage the pin into the
retaining tabs (2).
6. Install the inboard hinges and bolts.
7. Install the connector tube/outboard hinge assembly
into the seat cushion and install the bolts.
8. Install the seat back assembly. (Refer to 23 -
BODY/SEATS/SEAT BACK CUSHION / COVER -
INSTALLATION)
HB
SEATS
23 - 175
SEAT-THIRD ROW
REMOVAL
1. Fold the third seat cushion forward and remove the
bolts.
2. Remove the seat assembly from the vehicle.
INSTALLATION
1. Install the seat and fold the seat cushion forward.
2. Install the front bolts and tighten to 40 N·m (25 ft.
lbs.).
3. Install the rear bolts and tighten to 47 N·m (35 ft.
lbs.).
23 - 176
SEATS
HB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст