Dodge Durango (HB). Manual — part 1413
INSTALLATION
1. Position the seat into the vehicle and engage
inboard hinge (2).
2. Rotate seat down and engage the outboard hinge
(1).
3. Insert the hinge spring (1) and insert the pin (2).
4. Turn the hinge pin (3) and engage the pin into the
retaining tabs (2).
HB
SEATS
23 - 165
CUSHION/COVER-SEAT BACK - SECOND ROW
REMOVAL
Center
1. Using a trim stick C-4755 or equivalent, remove the
cup holder.
2. Using a trim stick C-4755 or equivalent, remove the
seat belt bezel.
23 - 166
SEATS
HB
3. Remove the screws and remove the side shields.
4. Remove the bolt and remove the seat belt anchor.
5. Separate the j-straps (1 & 2) and pull cover up
over frame.
6. Remove the four seat back bolts and remove the
seat back.
7. Remove the seat back cover and foam.
Outer
1. Fold the rear seat forward.
2. Remove the side shields.
3. Separate the j-straps (1 & 2) and pull cover up
over frame.
HB
SEATS
23 - 167
1. Remove the four bolts securing the seat back.
2. Remove the head rests and partially remove the
seat back cover.
3. Remove the head rest sleeves and remove the
cover and cushion.
INSTALLATION
Center
1. Position the seat back cover and foam over the
seat back frame and install the seat back.
2. Install the bolts.
3. Connect the j-straps (1 & 2).
4. Install the seat belt anchor and tighten the bolt to
43 N·m (32 ft. lbs.).
5. Install the side shields.
23 - 168
SEATS
HB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст