Dodge Durango (HB). Manual — part 1099
CRANKSHAFT
REMOVAL
1. Remove the vibration damper (1) (Refer to 9 -
ENGINE/ENGINE BLOCK/VIBRATION DAMPER -
REMOVAL).
2. Remove the rear oil seal retainer (Refer to 9 -
ENGINE/ENGINE
BLOCK/CRANKSHAFT
REAR
OIL SEAL RETAINE - REMOVAL).
3. Remove the oil pan (Refer to 9 - ENGINE/LUBRI-
CATION/OIL PAN - REMOVAL).
4. Remove the oil pump pickup.
5. Remove the windage tray/oil pan gasket.
HB
ENGINE - 5.7L SERVICE INFORMATION
9 - 1395
6. Remove the timing chain cover (Refer to 9 - ENGINE/VALVE TIMING/TIMING BELT / CHAIN COVER(S) -
REMOVAL).
9 - 1396
ENGINE - 5.7L SERVICE INFORMATION
HB
7. Remove the oil pump (Refer to 9 - ENGINE/LUBRICATION/OIL PUMP - REMOVAL).
8. Remove the timing drive (2) (Refer to 9 - ENGINE/
VALVE
TIMING/TIMING
BELT/CHAIN
AND
SPROCKETS - REMOVAL).
9. Identify rod bearing caps before removal. Remove rod bearing caps with bearings.
HB
ENGINE - 5.7L SERVICE INFORMATION
9 - 1397
10. Identify main bearing caps (1) before removal.
11. Remove main bearing caps (1) and bearings one
at a time.
12. Remove the thrust washers.
13. Remove the crankshaft out of the block.
9 - 1398
ENGINE - 5.7L SERVICE INFORMATION
HB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст