Dodge Ram Truck 1500-2500-3500. Manual — part 1564
18. Remove third gear (1) and bearing (2).
19. Turn mainshaft and Fixture 9605 and secured in
vise.
20. Remove 4x4 mainshaft snap ring.
21. Remove reverse gear synchronizer sleeve (1)
from reverse gear (2) synchronizer hub.
22. Remove
reverse
gear
synchronizer
hub
(1)
detents (2).
21 - 188
MANUAL TRANSMISSION - G56 - SERVICE INFORMATION
DR/DH
23. Remove mainshaft bearing (1) with Bridge 938 (2)
and bearing Puller 9647 (3).
24. Position puller (1) behind reverse synchronizer
hub and outer blocker ring (2).
25. Remove reverse gear (1) and bearing (2).
DR/DH
MANUAL TRANSMISSION - G56 - SERVICE INFORMATION
21 - 189
26. Remove reverse gear bearing race (1) and thrust
washer (2). Use Puller 9646 and Bridge 938 on
first gear (3) to pull off reverse gear bearing race
(1) and thrust washer (2).
27. Remove first gear and bearing.
28. Remove first gear synchronizer rings (1) from 1-2
synchronizer hub (2) and mark for installation
reference.
21 - 190
MANUAL TRANSMISSION - G56 - SERVICE INFORMATION
DR/DH
29. Slowly pull 1-2 synchronizer sleeve (1) up on hub
(2) enough to remove detents and springs (3).
30. Remove 1-2 synchronizer hub (1) snap ring (2)
and remove hub with second gear synchronizer
rings. Mark components for installation reference.
31. Remove second gear (1) from mainshaft (2).
DR/DH
MANUAL TRANSMISSION - G56 - SERVICE INFORMATION
21 - 191
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст