Dodge Ram Truck 1500-2500-3500. Manual — part 1513
SPECIAL TOOLS
POWER STEERING
ANALYZER SET, POWER STEERING FLOW/
PRESSURE 6815
ADAPTERS, POWER STEERING FLOW/PRESSURE
TESTER - 6893
Hose, Power Steering
Transmission Cooler Line Disconnect Tool - 8875
ADAPTERS, POWER STEERING 9091
19 - 86
PUMP - SRT-10
DR/DH
HOSES
REMOVAL
PRESSURE HOSE - PUMP TO FAN
NOTE: Review all Warnings and Cautions. (Refer to 19 - STEERING - WARNING).
CAUTION: Cap all open ends of power steering hoses, power steering pump fittings and steering gear ports
when disconnected. This will prevent the entry of foreign material into the components during servicing.
1. Siphon power steering fluid from fluid reservoir.
2. Unthread power steering pressure hose quick-connect (10) from power steering pump pressure fitting. Drain
excess power steering fluid from line.
3. Unthread power steering pressure hose quick-connect (8) from hydraulic fan (6). Drain excess power steering
fluid from line.
4. Remove power steering pressure hose (7) from routing clip on cooling module (5) . Remove hose.
PRESSURE HOSE - FAN TO GEAR
NOTE: Review all Warnings and Cautions. (Refer to 19 - STEERING - WARNING).
CAUTION: Cap all open ends of power steering hoses, power steering pump fittings and steering gear ports
when disconnected. This will prevent the entry of foreign material into the components during servicing.
1. Siphon power steering fluid from fluid reservoir.
DR/DH
PUMP - SRT-10
19 - 87
2. Unthread power steering pressure hose quick-con-
nect (6) from hydraulic fan (1). Drain excess power
steering fluid from line.
3. Unthread power steering pressure hose tube nut
from power steering gear port. Drain excess power
steering fluid from line.
4. Remove power steering pressure hose.
RETURN HOSE - FAN TO PUMP
NOTE: Review all Warnings and Cautions. (Refer to 19 - STEERING - WARNING).
CAUTION: Cap all open ends of power steering hoses, power steering pump fittings and steering gear ports
when disconnected. This will prevent the entry of foreign material into the components during servicing.
1. Siphon power steering fluid from fluid reservoir.
2. Remove clamp, then return hose at reservoir (9).
3. Remove clamp, then return hose at fan (9).
4. Remove hose.
19 - 88
PUMP - SRT-10
DR/DH
RETURN HOSE - GEAR TO COOLER
NOTE: Review all Warnings and Cautions. (Refer to 19 - STEERING - WARNING).
CAUTION: Cap all open ends of power steering hoses, power steering pump fittings and steering gear ports
when disconnected. This will prevent the entry of foreign material into the components during servicing.
1. Siphon power steering fluid from fluid reservoir.
2. Unthread power steering return hose tube nut from
power steering gear port (1). Pull tube out of gear
port and drain excess power steering fluid from
line.
3. Raise vehicle. (Refer to LUBRICATION & MAINTE-
NANCE/HOISTING - STANDARD PROCEDURE)
4. Remove front splash shield
5. Disconnect the quick connect fittings (1) on the
cooler hose going to the cooler using special tool
8875..
DR/DH
PUMP - SRT-10
19 - 89
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст