Dodge Ram Truck 1500-2500-3500. Manual — part 1570
36. Install third gear blocker ring (1) on stop ring (2).
37. Install 3-4 synchronizer hub (1) on third gear syn-
chronizer rings (2).
38. Install third gear synchronizer hub (1) snap ring
(2).
21 - 212
MANUAL TRANSMISSION - G56 - SERVICE INFORMATION
DR/DH
39. Install 3-4 synchronizer sleeve (3) on hub (2) and
push sleeve to the bottom of the hub.
NOTE: 3-4 synchronizer sleeve (3) and hub (2)
have one small tooth. They must be aligned to
install synchronizer sleeve (3).
40. Install 3-4 synchronizer detents and springs (1)
into synchronizer hub (2) slots. Then push detents
(1) behind synchronizer sleeve (3).
41. Install fourth gear blocker ring (1) on synchronizer
hub (2).
42. Install fourth gear outer friction ring (1) on syn-
chronizer hub (2).
DR/DH
MANUAL TRANSMISSION - G56 - SERVICE INFORMATION
21 - 213
43. Install fourth gear inner friction ring (1) on syn-
chronizer hub (2).
44. Install fourth gear stop ring (1) with teeth pointing
down on synchronizer hub (2).
45. Hold fourth gear stop ring (1) on synchronizer hub
(2) and center 3-4 synchronizer sleeve on hub.
46. Install fourth gear (1) and bearing (2).
21 - 214
MANUAL TRANSMISSION - G56 - SERVICE INFORMATION
DR/DH
47. Heat fourth gear thrust washer (1) on bearing
heater (2).
48. Using welding gloves, install fourth gear (1) thrust
washer (2).
49. Install fourth gear (1) snap ring (2).
DR/DH
MANUAL TRANSMISSION - G56 - SERVICE INFORMATION
21 - 215
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст