Dodge Ram Truck 1500-2500-3500. Manual — part 1895
5. Remove the rear output shaft bearing inner snap-
ring (3) from the output shaft (1).
6. Loosen rear case (2) from front case (1) with pry
tool to break sealer bead. Insert tool at each end of
case.
21 - 1512
TRANSFER CASE - NV273 - SERVICE INFORMATION
DR/DH
7. Unseat rear case from alignment dowels.
8. Remove the rear case (2) from the front case (1).
FRONT OUTPUT SHAFT AND DRIVE CHAIN
1. Remove the oil pick-up tube (3) and screen from
the front case half (1).
DR/DH
TRANSFER CASE - NV273 - SERVICE INFORMATION
21 - 1513
2. Remove the front output shaft (1) drive sprocket (2)
retaining ring (3).
3. Remove the rear output shaft (1) drive sprocket (2)
retaining ring (3).
21 - 1514
TRANSFER CASE - NV273 - SERVICE INFORMATION
DR/DH
4. Pull front sprocket (3), rear sprocket, and chain (2)
upward until clear of the front and rear output shaft
sprocket splines.
5. Remove chain and sprockets as an assembly.
SHIFT FORKS AND MAINSHAFT
1. Remove the bolts (3) that hold the shift motor
assembly (2) to the transfer case (1).
DR/DH
TRANSFER CASE - NV273 - SERVICE INFORMATION
21 - 1515
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст