Dodge Ram Truck 1500-2500-3500. Manual — part 1950
QUAD CAB
1. Route the seat belt (3) through the slot in the lower
B-pillar trim panel (1) and position the trim panel to
the B-pillar (2).
2. Engage the retaining tabs that secure the lower
B-pillar trim panel to the B-pillar.
3. Install the upper B-pillar trim panel (Refer to 23 -
BODY/INTERIOR/B-PILLAR
UPPER
TRIM
-
INSTALLATION).
4. Install the rear door sill trim cover (Refer to 23 -
BODY/INTERIOR/DOOR
SILL TRIM
COVER
-
INSTALLATION).
5. Install the cowl trim panel (Refer to 23 - BODY/IN-
TERIOR/COWL TRIM - INSTALLATION).
B-PILLAR UPPER TRIM
REMOVAL
REGULAR CAB
1. Remove the cap (1) and then the bolt (2) that
secures the seat belt (3) to the top of the B-pillar
(4) and position the seat belt out of the way.
2. Using a trim stick C-4755 or equivalent, disengage
the retaining tabs that secure the upper B-pillar trim
panel (5) to the B-pillar and remove the trim panel.
23 - 154
INTERIOR
DR/DH
QUAD CAB
1. Using a small flat-bladed tool, carefully open the
two fastener covers (2) located on the grab handle
(1).
2. Remove the two bolts (3) that secure the grab han-
dle to the B-pillar and remove the grab handle.
3. Remove the cap (1) and the bolt (2) that secures
the seat belt (3) to the top of the B-pillar (4) and
position the seat belt out of the way.
4. Using a trim stick C-4755 or equivalent, disengage
the retaining tabs that secure the upper B-pillar trim
panel (5) to the B-pillar and remove the trim panel.
DR/DH
INTERIOR
23 - 155
INSTALLATION
REGULAR CAB
1. Position the upper B-pillar trim panel (5) to the
B-pillar (4).
2. Engage the retaining tabs that secure the upper
B-pillar trim panel to the B-pillar.
3. Install the bolt (2) that secures the seat belt (3) to
the top of the B-pillar. Tighten the bolt to 40 N·m
(29 ft. lbs.).
4. Install the cap (1) onto the seat belt.
QUAD CAB
1. Position the upper B-pillar trim panel (5) to the
B-pillar (4).
2. Engage the retaining tabs that secure the upper
B-pillar trim panel to the B-pillar.
3. Install the bolt (2) that secures the seat belt (3) to
the top of the B-pillar. Tighten the bolt to 40 N·m
(29 ft. lbs.).
4. Install the cap (1) onto the seat belt.
23 - 156
INTERIOR
DR/DH
5. Install the grab handle (1) onto the B-pillar and
install the two bolts (3). Tighten the bolts to 6 N·m
(55 in. lbs.).
6. Close the two fastener covers (2) located on the
grab handle.
C-PILLAR LOWER TRIM
REMOVAL
1. Remove the upper C-pillar trim panel (Refer to 23 -
BODY/INTERIOR/C-PILLAR TRIM - REMOVAL).
2. Remove the bolt (3) that secures the seat belt (2)
to the bottom of the C-pillar (4) and position the
seat belt out of the way.
3. Using a trim stick C-4755 or equivalent, disengage
the retaining tabs that secure the lower C-pillar trim
panel (1) to the C-pillar.
4. Remove the seat belt from the lower C-pillar trim
panel through the slot provided and remove the
trim panel.
DR/DH
INTERIOR
23 - 157
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст