Dodge Ram Truck 1500-2500-3500. Manual — part 1555

10. Apply Mopar

T

Lock & Seal Adhesive or equivalent

to shift fork pivot bolts. Install 5-6 (1) and 3-4 (2)
shift fork pivot bolts, in both sides of the front
housing and tighten to 35 N·m (26 ft. lbs.).

NOTE: Verify shift fork pivot holes are aligned with
pivot bolt holes before installing bolts.

11. Install two detents (1) in the side of the front hous-

ing (2).

21 - 152

MANUAL TRANSMISSION - GETRAG 238 - SERVICE INFORMATION

DR/DH

FINAL ASSEMBLY

1. Turn front housing (1) with fixture (2) over onto the

front housing and remove fixture.

2. Install intermediate plate (1) and two dowels (2).

DR/DH

MANUAL TRANSMISSION - GETRAG 238 - SERVICE INFORMATION

21 - 153

3. Install intermediate plate (1) bolts (2) and tighten to

22 N·m (16 ft. lbs.).

4. Install interlock plate washers (1) on support (2).

5. Install interlock plate (2) and tighten bolts (1) to 10

N·m (88 in. lbs.).

21 - 154

MANUAL TRANSMISSION - GETRAG 238 - SERVICE INFORMATION

DR/DH

6. Install second gear bearing (1) on mainshaft (2).

7. Install second gear (1) on mainshaft (2).

8. Install second gear inner friction ring (1) on second

gear (2).

DR/DH

MANUAL TRANSMISSION - GETRAG 238 - SERVICE INFORMATION

21 - 155