Dodge Caliber. Manual — part 1321
SPEAKER AND GRILLE
REMOVAL
1. Using trim stick C–4755, find service notch (1)
located at the bottom of speaker grille and pry up
speaker grille.
2. Remove two screws attaching speaker to door
panel (3).
3. Remove two screws attaching speaker (2) to door
module (1).
4. Disconnect wire connector.
PM
DOOR - FRONT
23 - 21
INSTALLATION
1. Connect wire connector.
2. Install speaker (2) into panel (3) and install two
screws into door panel.
3. Install two screws into trim panel (1).
4. Install speaker grille (1) onto trim panel (3).
23 - 22
DOOR - FRONT
PM
FRONT DOOR HINGE
REMOVAL
1. Remove nuts (3) from door studs (1).
2. Remove door.
3. Disconnect door harness (2).
INSTALLATION
1. Connect door harness (2).
2. Install door studs (1) into door hinges.
3. Install nuts (3) onto door studs. Tighten to 26 N·m
(19 ft. lbs.)
PM
DOOR - FRONT
23 - 23
FRONT DOOR - BOLSTER
REMOVAL
1. Remove pull-cup screw (1).
2. Remove window crank (1) from spindle if equipped.
3. Using trim stick C-4755, start at the lower corner
and pull in the direction of the arrows. Bolster
should unsnap.
23 - 24
DOOR - FRONT
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст