Dodge Caliber. Manual — part 284
15. Slide generator down and out of vehicle.
INSTALLATION
1. Move A/C
compressor
to
the
side
to
install
generator.
PM
CHARGING
8F - 41
2. Rotate generator and set in place.
Make sure battery terminal (1) is in front of A/C line
(2).
3. Loose install lower mounting bolt.
8F - 42
CHARGING
PM
4. Loose install upper mounting bolt.
5. Tighten bolts to 61 N·m (45 ft. lbs.).
6. Install the B+ terminal nut and wire and tighten to
11.3 N·m (100 ins. lbs.).
7. Plug in the field circuit to the generator.
PM
CHARGING
8F - 43
8. Install idler pulley and tighten bolt.
9. Install the accessory drive belt.
10. Install splash shield.
11. Install lower air dam.
12. Lower vehicle.
13. Connect the negative battery cable.
8F - 44
CHARGING
PM
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст