Dodge Caliber. Manual — part 1130
10. Remove the lower strut bolts.
11. Remove the trailing link bushing bolts.
12. Support the rear cradle with a suitable lifting
device.
13. Remove the rear cradle bolts and lower the cradle
assembly from vehicle.
PM
FRAME & BUMPERS
13 - 31
14. Remove the lower stabilizer link nuts (2).
15. Remove the lower link bolts (5 and 6) at the
cradle.
16. Remove the upper link bolts (2) at the cradle.
13 - 32
FRAME & BUMPERS
PM
17. Remove the toe link cam bolts (1) at the cradle.
18. Remove the suspension knuckle assemblies.
19. Remove the stabilizer bushing bolts (1) and sep-
arate the stabilizer bar from the cradle.
INSTALLATION
1. Install the stabilizer bar and install the bushings
and bolts (1).
2. Tighten the bolts to 61 N·m (45 ft. lbs.).
PM
FRAME & BUMPERS
13 - 33
3. Position the suspension knuckle assemblies back
into position onto the crossmember.
4. Install the toe link cam bolts (1) at the cradle.
5. Tighten the bolts to 35 N·m (26 ft. lbs.).
6. Install the upper link bolts (2) at the cradle.
7. Tighten the bolts to 90 N·m (70 ft. lbs.).
8. Install the lower link bolts (5 and 6) at the cradle.
9. Tighten the bolts to 90 N·m (70 ft. lbs.).
13 - 34
FRAME & BUMPERS
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст