Dodge Caliber. Manual — part 1342
SCUFF PLATE-LIFTGATE SILL
REMOVAL
1. Using trim stick C-4755 or equivalent, pry up on
each scuff plate clip location hole (2).
2. Remove scuff plate (1).
INSTALLATION
1. Locate trim clips and align metal clips to liftgate
inner.
2. Tap on panel at each trim clip location (2) until
properly seated.
PM
INTERIOR
23 - 105
LIFTGATE UPPER SIDE MOLDING
REMOVAL
1. Using trim stick C4755 or equivalent, pry up at
each clip location.
2. Remove upper side trim.
INSTALLATION
1. Locate and align metal clips to holes in liftgate
inner.
2. Start at top clip (2) and work downward to bottom
clips (3).
3. Tap on panel at each clip location until side trim (1)
is properly seated.
23 - 106
INTERIOR
PM
LIFTGATE UPPER MOLDING
REMOVAL
1. Using trim stick C-4755 or equivalent, pry up on
upper trim(1) ensuring trim tabs disengage.
2. Remove from vehicle.
INSTALLATION
1. Align molding tabs (2) with holes in liftgate.
2. Hand tap trim (1) onto liftgate holes at clip
locations.
PM
INTERIOR
23 - 107
LOWER LIFTGATE TRIM W/OUT SPEAKER
REMOVAL
1. Remove upper liftgate molding. (Refer to 23 -
BODY/INTERIOR/LIFTGATE UPPER MOLDING -
REMOVAL)
2. Remove liftgate upper side molding. (Refer to 23 -
BODY/INTERIOR/LGATE UPPER SIDE MOLDING
- REMOVAL)
3. Remove liftgate screws (2) from liftgate nuts (1).
4. Using special tool C-4755, pry up liftgate trim tabs
(4) from liftgate.
5. Remove lower liftgate trim (3) from vehicle.
INSTALLATION
1. Align lower liftgate trim tabs (4) with liftgate holes.
2. Hand tap liftgate panel ensuring liftgate tabs are
properly seated.
3. Install liftgate screws (2) into liftgate nuts (1).
4. Install upper side molding. (Refer to 23 - BODY/IN-
TERIOR/LGATE
UPPER
SIDE
MOLDING
-
INSTALLATION)
5. Install upper liftgate molding. (Refer to 23 - BODY/
INTERIOR/LIFTGATE
UPPER
MOLDING
-
INSTALLATION)
23 - 108
INTERIOR
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст