Dodge Caliber. Manual — part 1343
LOWER LIFTGATE TRIM W/ SPEAKER
REMOVAL
1. Remove trim panel fasteners (2).
2. Using trimstick C-4755, pry up on trim panel and
remove trim panel from liftgate.
3. Remove six speaker fasteners.
PM
INTERIOR
23 - 109
4. Disconnect speaker wire from harness.
INSTALLATION
1. Connect speaker connector to wire harness.
2. Fasten speaker to liftgate.
23 - 110
INTERIOR
PM
3. Align trim panel to liftgate holes and install trim
panel fasteners.
PM
INTERIOR
23 - 111
COVER ASSEMBLY CARGO FLOOR
REMOVAL
1. Pull upward on cargo load floor (1) disengaging
tabs.
2. Pull outward at rear of cargo load floor removing
cargo load floor disengaging cargo load floor from
rear quarter panel pockets.
3. Remove from vehicle.
INSTALLATION
1. Load cargo load floor (1) into vehicle, ensuring
cargo load floor pivots fit into pockets onto the rear
quarter trim panel.
2. Once rear cargo load floor pivots are properly
seated into pockets, snap down the front cargo
load floor tabs ensuring cargo load floor is seated.
23 - 112
INTERIOR
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст