Dodge Caliber. Manual — part 1182
15. Install the output shaft head bearing on to the pin-
ion shaft using Installer 9714 and a Press.
16. Install the output shaft head bearing cup using
Installer 6061 and Handle C-4171
PM
POWER TRANSFER UNIT
21 - 27
17. Install the output shaft tail bearing cup using
Installer 9855 and Handle C-4171.
18. Install the output shaft spacer onto the output
shaft.
21 - 28
POWER TRANSFER UNIT
PM
19. Install output shaft into output shaft housing.
20. Install output shaft tail bearing on to out put shaft
using Installer L-4411.
NOTE: The output shaft nut is a staked type nut
21. Install the output shaft nut (1) onto the output
shaft (2).
PM
POWER TRANSFER UNIT
21 - 29
22. Torque the output shaft nut using Pinion Nut
Socket 9921 to 150 N·m (111 ft. lbs.)..
23. Using a punch stake the out put shaft nut.
24. Install the pinion housing O-ring (3).
25. Install the pinion housing shim (1).
26. Install the output shaft seal using Installer 9851
and Handle C-4171.
21 - 30
POWER TRANSFER UNIT
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст