Dodge Caliber. Manual — part 1283
7. Remove the stepping motor (1) from the valve
body.
ASSEMBLY
CAUTION: Do not re-use the lip seal. Apply CVT
fluid when installing the lip seal.
1. Install the new lip seal (1) into the transaxle case.
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 431
2. Install the stepping motor (1) onto the control valve
body. Install and Torque the mounting bolts to 8
N·m (70 in.lbs.).
3. Install the valve body harness (1) onto the control
valve body.
21 - 432
AUTOMATIC - CVT-SERVICE INFORMATION
PM
CAUTION: Ensure the manual valve is free of dirt,
lint or other debris. Apply CVT fluid when install-
ing the manual valve.
4. Install the manual valve (1) into the control valve
body.
5. Install the return spring (1) into the control valve
body.
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 433
CAUTION: Apply CVT fluid when installing the pul-
ley ratio linkage.
6. Hook the pawl of the pulley ratio linkage (1) onto
the stepping motor and install it on the control
valve.
INSTALLATION
1. To install the control valve body assembly on to the
transaxle case, insert a 75 mm (3 in.) long 3 mm
(0.118 in.) rod or wire into the linkage stopper hole
of the control valve assembly to set the pulley ratio
linkage (1) in position.
21 - 434
AUTOMATIC - CVT-SERVICE INFORMATION
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст