Dodge Caliber. Manual — part 1277
7. Place the drum (1) over Compressor bottom 8900
in Vice (2).
8. Place correct ring (1) that comes with Compressor
8900 in drum (3).
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 407
9. Install threaded rod (1) that comes with Compres-
sor 8900 (2) in drum (3).
10. Compress tool until the snap ring (4) can be
removed.
11. Use snap ring pliers or a small screw driver to
remove the snap ring (3) from the piston (1).
21 - 408
AUTOMATIC - CVT-SERVICE INFORMATION
PM
12. Remove snap ring.
13. Remove the piston (1) from the drum (3).
14. Remove the spring assembly (2) form the drum
(3).
INSPECTION
1. Check driven plate, drive plate, retaining plate and forward clutch drum for damage, distortion or burnt surfaces.
2. Check snap ring and dish plate for damage, distortion or permanent fatigue.
3. Check input shaft and internal gear for damage and distortion.
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 409
ASSEMBLY
1. Refer to the exploded views as necessary when performing the following steps.
21 - 410
AUTOMATIC - CVT-SERVICE INFORMATION
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст