Dodge Caliber. Manual — part 1278
2. Refer to this view as necessary when performing
the following steps.
3. Install the spring assembly (1) into the drum (2).
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 411
4. Install the piston (1) into the drum (3).
5. Lay the snap ring onto the piston.
21 - 412
AUTOMATIC - CVT-SERVICE INFORMATION
PM
6. Install Compressor 8900.
7. Compress the piston.
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 413
8. Use snap ring pliers or a small screw driver to
install the snap ring (3) onto the piston (1).
CAUTION: Install so that the installation order of
each plate is correct.
9. Install the dish plate (5), the driven plate (3), the
drive plate (4), the retaining plate (2) and one piece
of the snap ring (1), in the forward clutch piston (6).
21 - 414
AUTOMATIC - CVT-SERVICE INFORMATION
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст