Dodge Caliber. Manual — part 1274
21. Connect the transmission vent tube (1).
22. Install the heater hose at transmission cooler tube
(3).
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 395
23. Connect coolant lines at transmission cooler.
24. Install the shiftier cable (1) and bracket (2) torque
to 11 N·m (105 in. lbs.).
25. Install the vacuum supply lines.
21 - 396
AUTOMATIC - CVT-SERVICE INFORMATION
PM
26. Install intake air tube (1).
27. Fill engine coolant (Refer to 7 - COOLING -
STANDARD PROCEDURE).
28. Install the battery tray (1).
29. Install the battery.
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 397
30. Install the air cleaner assembly (1).
31. Connect battery cables (2).
32. Install the transmission fill tube (1) Torque bolt to
9 N·m (79 in. lbs.).
33. Fill the transmission with fluid to the correct level.
CAUTION: Use only MOPAR
T
CVTF +4, use of any
other type of automatic transmission fluid may
cause damage to the CVT.
34. Road test vehicle and inspect for leaks.
SPECIFICATIONS -
CLEARANCES
DESCRIPTION
SPECIFICATION
Forward clutch
1.2-1.5 mm (0.047-0.059 in.)
Forward Clutch, Total end play
0.25 - 0.55 mm (0.010 - 0.022 in)
Required differential preload
0.17 mm (0.007 in)
Required preload , Reduction gear
0.13-0.19 mm (0.005-0.0075 in)
Reduction Assembly required select shim
Reduction assembly measurement , minus reduction
assembly measurement, plus reduction assembly
measurement , plus 0.16 mm (0.006 in)
21 - 398
AUTOMATIC - CVT-SERVICE INFORMATION
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст