Dodge Caliber. Manual — part 1273
5. Install the transmission crossmember and bolts, (2)
torque to 75 N·m (55 ft lbs.).
6. Install the through bolt at the front transmission
mount (1) and torque to 75 N·m (55 ft lbs.).
7. Install rear mount through bolt (1) and torque bolt
to 75 N·m (55 ft lbs.).
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 391
8. Install rear mount to transaxle and torque bolts (1)
to 75 N·m (55 ft lbs.).
9. Install new torque converter bolts (1) and torque to
88 N·m (65 ft. lbs.).
21 - 392
AUTOMATIC - CVT-SERVICE INFORMATION
PM
10. Install cover at torque converter (1).
11. Install the PTU if equipped (Refer to 21 - TRANS-
MISSION/TRANSAXLE/POWER
TRANSFER
UNIT - INSTALLATION).
12. Install the right front lower splash shield.
13. Install the left front lower splash shield.
14. Install left half and right half shafts to the trans-
axle (Refer to 3 - DIFFERENTIAL & DRIVELINE/
HALF SHAFT - INSTALLATION).
15. Install both front wheels (Refer to 22 - TIRES/
WHEELS - REMOVAL).
16. Lower hoist.
17. Install upper bell housing bolts (1) and torque to
108 N·m (80 ft. lbs.).
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 393
18. Install the upper mount bolts and torque to 75
N·m (55 ft lbs.).
19. Install the upper mount through bolt and torque 75
N·m (55 ft lbs.).
20. Install the throttle body support bracket (1) and
torque to 11 N·m (105 in. lbs.).
21 - 394
AUTOMATIC - CVT-SERVICE INFORMATION
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст