Dodge Caliber. Manual — part 1179
15. Install Puller 6444 and Jaws 6451 onto output
shaft head bearing.
16. Place Puller in a vice and remove the bearing.
17. Remove the inspection cover bolts (1).
PM
POWER TRANSFER UNIT
21 - 15
18. Remove the inspection cover.
19. Remove the side cover bolts (1).
21 - 16
POWER TRANSFER UNIT
PM
20. Remove the side cover from case.
21. Remove the carrier assembly.
NOTE: Bearing cup is a slip fit
22. Remove bearing cup by hand (1) or by using a
pick.
PM
POWER TRANSFER UNIT
21 - 17
23. Remove the shim (1) under the bearing cup (3)
measure and record the size of the shim.
24. Remove the inner seal from the PTU cover.
25. Remove the outer seal from the PTU cover.
21 - 18
POWER TRANSFER UNIT
PM
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст