Dodge Caliber. Manual — part 1178
6. Remove the pinion housing shim.
7. Remove the pinion housing O-ring
NOTE: The pinion nut is a staked type nut
8. Using a punch, remove the staked depression in
the pinion nut.
PM
POWER TRANSFER UNIT
21 - 11
9. Remove the output shaft nut, using the Pinion Nut
Socket 9921 and Spline Socket 9922.
10. Press the output shaft from the housing using a
press.
21 - 12
POWER TRANSFER UNIT
PM
11. Remove the output shaft spacer.
12. Remove the output shaft bearing.
PM
POWER TRANSFER UNIT
21 - 13
13. Remove the output shaft housing small side bear-
ing cup using a brass drift.
14. Remove the output shaft housing large side bear-
ing cup using a brass drift.
21 - 14
POWER TRANSFER UNIT
PM
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст