Dodge Caliber. Manual — part 1271
92. Install the converter housing on the transaxle
case and Torque the bolts to 45 N·m (33 ft.lbs.).
93. Install the transmission range sensor (TRS) (1)
over the manual shaft and onto the transaxle
case.
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 383
CAUTION: Do not re-use the TRS transmission
range sensor.
94. Put the manual shaft in the N position (3). Install
Alignment Tool 9876 (2) and adjust the position of
the TRS (1).
95. Install and Torque the mounting bolts of the TRS
to 6 N·m (49 in.lbs.).
96. Remove the TRS alignment tool from the TRS.
21 - 384
AUTOMATIC - CVT-SERVICE INFORMATION
PM
97. Install the shift lever (1) onto the manual shaft.
Install and Torque the mounting nut to 17 N·m
(150 in.lbs.).
CAUTION: Do not re-use the o-ring. Apply CVT
fluid when installing the o-ring.
98. Install the o-ring (1) onto the input speed sensor.
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 385
99. Install the input speed sensor (1) into the trans-
axle case. Install and Torque the mounting bolt to
6 N·m (52 in.lbs.).
CAUTION: Do not re-use the o-ring. Apply CVT
fluid when installing the o-ring.
100. Install the new o-ring (1) onto the output speed
sensor.
21 - 386
AUTOMATIC - CVT-SERVICE INFORMATION
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст