Dodge Caliber. Manual — part 1257
39. Remove the oil pan gasket (1) from the transaxle
case.
40. Remove the bolts holding the oil strainer (1) to the
valve body.
41. Remove the oil strainer.
42. Remove and discard the oil strainer o-ring.
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 327
43. Remove the bolt (2) holding the oil pump to the
transaxle case from the rear of the transaxle.
44. Remove the bolts (1) holding the oil pump to the
transaxle case from inside the transaxle.
45. Remove the oil pump from the transaxle case.
NOTE: One of the oil pump retaining bolts is
installed from the outside of the transaxle case
into the rear part of the oil pump.
46. Remove and discard the o-ring (1) from the oil
pump mounting bolt. (Only on bolt installed from
the outside of the transaxle case)
21 - 328
AUTOMATIC - CVT-SERVICE INFORMATION
PM
47. Remove and discard the lip seal (1) from the
transaxle case.
48. Remove the bolt holding the detente spring (1) to
the transaxle case.
49. Remove the detente spring from the transaxle
case.
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 329
50. Remove the forward clutch assembly (1) from the
transaxle case.
51. Remove needle bearing (1) from forward clutch
drum side of the sun gear.
21 - 330
AUTOMATIC - CVT-SERVICE INFORMATION
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст