Dodge Caliber. Manual — part 1290
5. Remove the grommet (1) at the bulkhead.
6. Remove the shifter (Refer to 21 - TRANSMISSION/
TRANSAXLE/AUTOMATIC - CVT/SHIFT MECHA-
NISM - REMOVAL).
7. Squeeze clip (2) at cable (1).
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 459
8. Pull cable from bracket (2) at bulkhead (1).
9. Pull the cable (1,2) through the bulkhead into the
engine compartment.
21 - 460
AUTOMATIC - CVT-SERVICE INFORMATION
PM
INSTALLATION
1. Install the shifter cable (1,2) through the bulkhead
and into the passenger compartment.
2. Install the cable into the bracket (2) at bulkhead
(1).
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 461
3. Insure the cable clips into place.
4. Install the shifter (Refer to 21 - TRANSMISSION/
TRANSAXLE/AUTOMATIC - CVT/SHIFT MECHA-
NISM - INSTALLATION).
5. Install
the
shifter
cable
grommet
(1)
at
the
bulkhead.
21 - 462
AUTOMATIC - CVT-SERVICE INFORMATION
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст