Dodge Caliber. Manual — part 1289
INSTALLATION
1. Plug the electrical connector in at the shifter.
2. Install the shifter in place.
3. Clip the shift cable to the shifter.
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 455
4. Install the shifter bolts and torque to 70 N·m (52 ft.
lbs.).
5. Install the counsel (1).
6. Connect the electrical connector (2) (if equipped).
21 - 456
AUTOMATIC - CVT-SERVICE INFORMATION
PM
7. Install the screws (1) at the counsel.
8. Install the shifter bezel (1).
PM
AUTOMATIC - CVT-SERVICE INFORMATION
21 - 457
CABLE-GEAR SHIFT
REMOVAL
1. Remove the air box (1).
2. Disconnect the Negative battery cable (2).
3. Remove shifter cable (2)at transmission bracket
(3).
4. Remove the nut (3) on the shifter cable to shift
lever.
21 - 458
AUTOMATIC - CVT-SERVICE INFORMATION
PM
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст