Dodge Caliber. Manual — part 1358
9. Remove the foam insert (2) from the seat back
assembly (1).
10. Separate the seat cover (3) from the foam cush-
ion (1) and cut off all hog rings (2) attaching the
cover to the foam.
11. Squeeze the locking tab (3) and remove the head-
rest sleeves (1).
12. Remove the seat back cover and cushion.
PM
SEATS
23 - 169
ASSEMBLY
1. Position the seat back cushion on the frame and
position the cover over the cushion.
2. Attach the seat cover (3) to the seat back cushion
(1) and install new hog rings (2) as required.
3. Position the foam insert (2) back at the base of the
seat back assembly (1).
23 - 170
SEATS
PM
4. Zip the cover back over the frame.
5. Install the push pin fasteners (3).
6. Position the inner cover (2) over the frame hooks
(1).
7. Fasten the upper (1) and lower (2) zip strips at the
bottom of the seat back.
PM
SEATS
23 - 171
8. Install the child tether bezels (2) and install the
screws (1).
9. Install the latch (1) and install the bolts (2).
10. Tighten the bolts to 28 N·m (21 ft. lbs.).
11. Install the latch bezel (2) and install the screws
(1).
23 - 172
SEATS
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст