Dodge Caliber. Manual — part 1356
3. Position the side shields onto the seat adjuster
tabs (1) and seat the clip (2) fully.
4. Install the screws (3) attaching the inboard and out-
board side shields to the seat frame.
5. Install the recliner shields (1) and install the screws
(5).
6. Connect the recliner cable ends (4) and fasten the
cable housing (2) to the seat back frame.
7. Install both of the inner side shields (1).
PM
SEATS
23 - 161
8. Position the seat back (1) into the upright position.
9. Install the seat cushion, (Refer to 23 - BODY/
SEATS/SEAT
CUSHION
-
FRONT
-
INSTALLATION).
23 - 162
SEATS
PM
SEAT BACK - REAR
DESCRIPTION
REAR SEAT BACK - W/O RECLINER OPTION
REAR SEAT BACK - W/O RECLINER OPTION
1 - 60% SEAT BACK COVER
17 - PUSH PIN FASTENER
2 - 60% SEAT BACK FOAM CUSHION
18 - SEAT BACK FRAME ASSEMBLY 40%
3 - PIVOT BOLT 32 N·m (24 ft. lbs.)
19 - CHILD TETHER BEZEL SCREWS
4 - PIN
20 - CHILD TETHER BEZEL
5 - FLOOR BRACKET
21 - LATCHES (2)
6 - LATCH BEZEL SCREW
22 - LATCH BEZEL
7 - LATCH BEZEL
23 - LATCH BEZEL SCREWS
8 - LATCH BEZEL SCREWS
24 - PUSH PIN FASTENER
9 - LATCH BOLTS 28 N·m (21 ft. lbs.)
25 - SHIELD
10 - FLOOR BRACKET
26 - PIVOT BOLT 32 N·m (24 ft. lbs.)
11 - CHILD TETHER BEZELS
27 - FLOOR BRACKET
12 - CHILD TETHER BEZEL SCREWS
28 - LATCH BOLTS 28 N·m (21 ft. lbs.)
13 - BOLTS 7 N·m (5 ft. lbs.)
29 - FLOOR BRACKET
14 - CENTER SHIELD
30 - PIVOT BOLT 32 N·m (24 ft. lbs.)
15 - FLOOR BRACKET
31 - SEAT BACK FOAM CUSHION 40%
16 - PIVOT BOLT 45 N·m (33 ft. lbs.)
32 - SEAT BACK CUSHION COVER 40%
PM
SEATS
23 - 163
REAR
SEA
T
BACK
-
RECLINER
23 - 164
SEATS
PM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст