Dodge Dakota (R1). Manual — part 767
QUARTER WINDOW OPENING
ENGINE COMPARTMENT OPENING
23 - 56
BODY
AN
BODY (Continued)
BACKLITE OPENING
AN
BODY
23 - 57
BODY (Continued)
TORQUE SPECIFICATIONS
DESCRIPTION
SPECIFICATION
Bench seat track to seat
frame bolt
24 N·m (17 ft. lbs.)
Bench seat outer track to
seat frame bolt
24 N·m (17 ft. lbs.)
Bench seat to floor pan
front bolt
40 N·m (30 ft. lbs.)
Bench seat to floor pan
rear bolt
28 N·m (20 ft. lbs.)
Bucket seat track to seat
frame bolt
24 N·m (17 ft. lbs.)
Bucket seat track to floor
pan front bolt
28 N·m (20 ft. lbs.)
Bucket seat track to floor
pan rear inboard bolt
40 N·m (30 ft. lbs.)
Bucket seat track to floor
pan rear outboard bolt
28 N·m (20 ft. lbs.)
Cab mounting bolt
81 N·m (60 ft. lbs.)
Cargo box bolt
27 N·m (20 ft. lbs.)
Center seat to bucket
seat inboard track bolts
24 N·m (17 ft. lbs.)
Console lid/seat back
pivot bolt
24 N·m (17 ft. lbs.)
Console lid/seat back to
left hinge bracket torx
screws
24 N·m (17 ft. lbs.)
Front bucket seat belt
buckle anchor bolt
40 N·m (29 ft. lbs.)
Front door hinge to hinge
pillar bolts
28 N·m (21 ft. lbs.)
Front door hinge to door
nuts and bolts
28 N·m (21 ft. lbs.)
Front seat belt retractor
bolt
44 N·m (32 ft. lbs.)
Front turning loop anchor
bolt
44 N·m (32 ft. lbs.)
Front lower belt anchor
bolt
44 N·m (32 ft. lbs.)
Front seat rear inboard
seat track to floor pan
bolts
40 N·m (30 ft. lbs.)
torque.
Front seat rear outboard
seat track to floor pan
bolts
16 N·m (11 ft. lbs.)
Front seat front seat
track to floor pan bolts
16 N·m (11 ft. lbs.)
DESCRIPTION
SPECIFICATION
Rear seat belt retractor
bolt
44 N·m (32 ft. lbs.)
Rear turning loop anchor
bolt
44 N·m (32 ft. lbs.)
Rear lower belt anchor
bolt
44 N·m (32 ft. lbs.)
Rearview mirror set
screw
1 N·m (9 in. lbs.)
Side view mirror nut
7 N·m (65 in. lbs.)
Rear seat belt/buckle
anchor bolt
44 N·m (32 ft. lbs.)
SPECIAL TOOLS
BODY
Trim Stick C-4755
Torx Bit Set C-4794-B
Molding Remover C-4829
23 - 58
BODY
AN
BODY (Continued)
DECKLID/HATCH/LIFTGATE/TAILGATE
TABLE OF CONTENTS
page
page
TAILGATE CHECK CABLE
TAILGATE LATCH
TAILGATE LATCH RELEASE HANDLE
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . 60
TAILGATE LATCH STRIKER
TAILGATE
TAILGATE CHECK CABLE
REMOVAL
(1) Release tailgate latch and open tailgate.
(2) Pry lock tab outward to clear stud head on
cargo box (Fig. 1).
(3) Push cable end forward until stud head is in
clearance hole portion of cable end.
(4) Separate cable end from stud.
(5) Remove screw holding cable to tailgate.
(6) Separate check cable from tailgate.
INSTALLATION
Reverse the preceding operation.
TAILGATE LATCH
REMOVAL
(1) Remove bolts attaching tailgate latch to tail-
gate (Fig. 2).
(2) Remove bezel for tailgate latch release handle.
(3) Remove bolts attaching tailgate latch release
handle to tailgate.
(4) Disengage latch rods at tailgate latch release
handle.
(5) Separate latch from tailgate and disengage
latch rod from latch.
INSTALLATION
(1) Engage latch rods to tailgate latch release han-
dle.
(2) Install tailgate latch release handle.
(3) Attach latch release rod to latch.
(4) Position latch in tailgate.
(5) Install bolts attaching tailgate latch to tailgate.
(6) Install bezel for tailgate latch release handle.
TAILGATE LATCH RELEASE
HANDLE
REMOVAL
(1) Using a trim stick and starting at the bottom
of the latch release handle, disengage the bottom
clips attaching the bezel to the tailgate.
(2) Slide the bezel downward to remove it from the
tailgate.
(3) Remove screws attaching latch release handle
to tailgate (Fig. 2).
(4) Disengage latch release rods (Fig. 3).
(5) Separate latch release from tailgate.
Fig. 1 Tailgate Check
1 - SCREW DRIVER
2 - TAILGATE CHECK CABLE
3 - LOCK TAB
AN
DECKLID/HATCH/LIFTGATE/TAILGATE
23 - 59
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст