Dodge Nitro. Manual — part 606
Fig. 321: Removing/Installing Collapsible Spacer From Pinion Shaft
Courtesy of CHRYSLER LLC
12. Remove collapsible spacer (1) from pinion shaft (3).
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
Fig. 322: Removing Rear Pinion Bearing From Pinion Shaft With Puller/Press C-293-PA And
Adapters C-293-47
Courtesy of CHRYSLER LLC
13. Remove rear pinion bearing from pinion shaft (1) with Puller/Press C-293-PA (2) and Adapters C-293-47
(3).
Fig. 323: Removing/Installing Depth Shims From Pinion Shaft
Courtesy of CHRYSLER LLC
14. Remove depth shims (1) from the pinion shaft (2) and record the shims thickness.
INSTALLATION
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
GEAR-PINION/RING
Fig. 324: Installing Rear Pinion Bearing Cup With Installer C-4308 And Handle C-4171
Courtesy of CHRYSLER LLC
1. Install rear pinion bearing cup with Installer C-4308 (1) and Handle C-4171 (2).
Fig. 325: Installing Front Pinion Bearing Cup With Installer D-130 And Handle C-4171
NOTE:
A pinion depth shim is located under the rear pinion bearing. If ring and pinion
gears are reused, the original pinion depth shim/oil baffle can be used. Refer to
Adjustments (Pinion Gear Depth) to select the proper shim thickness if ring and
pinion gear are replaced.
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
Courtesy of CHRYSLER LLC
2. Install front pinion bearing cup with Installer D-130 (1) and Handle C-4171 (2).
Fig. 326: Installing Pinion Seal With Installer C-4076-B And Handle C-4735
Courtesy of CHRYSLER LLC
3. Install pinion front bearing in housing.
4. Apply a light coating of gear lubricant on the lip of pinion seal and install seal with Installer C-4076-B (1)
and Handle C-4735 (2).
Fig. 327: Removing/Installing Depth Shims From Pinion Shaft
Courtesy of CHRYSLER LLC
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст