Dodge Nitro. Manual — part 314
19. The new nut (3) must be staked after the correct turning torque is obtained. See Fig. 35. Use Staking Tool
6639 (2) to stake output shaft nut.
Fig. 36: Identifying Bottomed In Slot & Correctly Staked Nut
Courtesy of CHRYSLER LLC
20. Verify that the nut has been properly staked to the output shaft. See Fig. 36.
1 - BOTTOMED IN SLOT
2 - CORRECTLY STAKED NUT
2007 Dodge Nitro R/T
2007 AUTOMATIC TRANSMISSION 42RLE - Service Information - Nitro
Fig. 37: Installing Low/Reverse Clutch Pack
Courtesy of CHRYSLER LLC
21. Install low/reverse clutch pack (1, 2). See Fig. 37. Leave uppermost disc out to facilitate snap ring
installation.
1 - CLUTCH PLATES (5)
2 - CLUTCH DISCS (5)
2007 Dodge Nitro R/T
2007 AUTOMATIC TRANSMISSION 42RLE - Service Information - Nitro
Fig. 38: Installing Low/Reverse Reaction Plate Snap Ring
Courtesy of CHRYSLER LLC
22. Install low/reverse reaction plate snap ring (2). See Fig. 38.
1 - SCREWDRIVER
2 - LOW/REVERSE REACTION PLATE FLAT SNAP
RING
3 - DO NOT SCRATCH CLUTCH PLATE
2007 Dodge Nitro R/T
2007 AUTOMATIC TRANSMISSION 42RLE - Service Information - Nitro
Fig. 39: Installing One Low/Reverse Clutch Disc
Courtesy of CHRYSLER LLC
23. Install one low/reverse clutch disc (1). See Fig. 39.
1 - ONE DISC FROM LOW/REVERSE CLUTCH
2007 Dodge Nitro R/T
2007 AUTOMATIC TRANSMISSION 42RLE - Service Information - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст