Dodge Nitro. Manual — part 571
REMOVAL
SEAL-AXLE SHAFT
Fig. 153: Identifying Right Axle Shaft & Remover 8420A
Courtesy of CHRYSLER LLC
1. Remove haft shafts.
2. On the right side, remove axle shaft (1) with Remover 8420A (2) and Slide Hammer C-3752.
Fig. 154: Removing Shaft Seal From Axle With Remover 7794-A And Slide Hammer C-637
Courtesy of CHRYSLER LLC
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
3. Remove shaft seal (1) from axle with Remover 7794-A (2) and a Slide Hammer C-637.
INSTALLATION
SEAL-AXLE SHAFT
Fig. 155: Installing Shaft Seal With Installer 8806 And Handle C-4171
Courtesy of CHRYSLER LLC
1. Apply a light coat of lubricant on the lip of the shaft seal.
2. Install new shaft seal with Installer 8806 (1) and Handle C-4171 (2).
3. Install right axle shaft and half shafts.
BEARING-AXLE
REMOVAL
BEARING-AXLE
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
Fig. 156: Identifying Right Axle Shaft & Remover 8420A
Courtesy of CHRYSLER LLC
1. Remove haft shafts.
2. On the right side, remove axle shaft (1) with Remover 8420A (2) and Slide Hammer C-3752.
Fig. 157: Removing Shaft Seal From Axle With Remover 7794-A And Slide Hammer C-637
Courtesy of CHRYSLER LLC
3. Remove shaft seal (1) with Remover 7794-A (2) and a Slide Hammer C-637.
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
Fig. 158: Removing Shaft Bearing/Bushing With Remover 7794-A And Slide Hammer C-637
Courtesy of CHRYSLER LLC
4. Remove shaft bearing/bushing (1) with Remover 7794-A (2) and a Slide Hammer C-637.
INSTALLATION
BEARING-AXLE
Fig. 159: Positioning Bearing/Bushing In Housing Bore
Courtesy of CHRYSLER LLC
1. Position bearing/bushing (1) in the housing (2) bore.
2007 Dodge Nitro R/T
2007 DRIVELINE Differential & Driveline - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст