Dodge Nitro. Manual — part 448
Fig. 450: Passenger Seat Export Assembly
Courtesy of CHRYSLER LLC
10 - WIRE, SHIELD ATTACHMENT
35 - RIVET
11 - SCREW
36 - NUT 47.5 N.m (35 ft. lbs.)
12 - SHIELD
37 - RISER
13 - SHIELD
38 - SCREW
14 - RECLINER, HANDLE ASSEMBLY
39 - BRACKET, METAL MODULE
15 - SCREW, M10 47.5 N.m (35 ft. lbs.)
40 - MODULE, OCS
16 - FRAME, SEAT BACK
41 - NUT 27.5 N.m (20 ft. lbs.)
17 - PLATE, ROUTING
42 - MODULE, ASSEMBLY HEATED
18 - SCREW
43 - CUSHION, SEAT
19 - PANEL, BACK ASSEMBLY
44 - CUSHION, BACK
20 - SHIELD
45 - ELEMENT, HEATED BACK
21 - SHIELD
46 - ELEMENT, HEATED SEAT
22 - SCREW, M10 47.5 N.m (35 ft. lbs.)
47 - COVER, SEAT
23 - SHIELD, ASSEMBLY
48 - COVER, SEAT BACK
24 - SHIELD, SIDE
49 - COVER, HEAD REST
25 - PRETENSIONER, ASSEMBLY
-
1 - BAG, BSR
21 - SCREW, M10 47.5 N.m (35 ft. lbs.)
2 - HEADREST, GUIDE WITHOUT BUTTON 22 - SHIELD, ASSEMBLY
2007 Dodge Nitro R/T
2007 ACCESSORIES AND EQUIPMENT Body - Nitro
REMOVAL
SEAT - FRONT
Fig. 451: Front Bolts, Seat Belt Bolts, Seat Belts, Side Shield & Electrical Connectors
Courtesy of CHRYSLER LLC
1. Remove the head rests to ease with seat removal.
3 - HEADREST, ASSEMBLY
23 - SHIELD, ASSEMBLY
4 - SHIELD, CLOSEOUT
24 - PRETENSIONER, ASSEMBLY
5 - HEADREST, GUIDE WITH LOCK
25 - BOLT, SEAT BELT 47.5 N.m (35 ft. lbs.)
6 - SHIELD, ASSEMBLY
26 - SCREW
7 - RECLINER, HANDLE ASSEMBLY
27 - CABLE, RELEASE
8 - SCREW
28 - FRAME, SEAT
9 - RIVET
29 - HARNESS, ASSEMBLY
10 - WIRE, SHIELD ATTACHMENT
30 - RISER
11 - SCREW
31 - NUT 27.5 N.m (20 ft. lbs.)
12 - SHIELD
32 - RISER
13 - SCREW, M10 47.5 N.m (35 ft. lbs.)
33 - MODULE, ASSEMBLY HEATED
14 - SHIELD
34 - CUSHION, SEAT
15 - FRAME, SEAT BACK
35 - CUSHION, BACK
16 - PLATE, ROUTING
36 - ELEMENT, HEATED BACK
17 - SCREW
37 - ELEMENT, HEATED SEAT
18 - PANEL, BACK ASSEMBLY
38 - COVER, SEAT
19 - SHIELD
39 - COVER, SEAT BACK
20 - SHIELD
40 - COVER, HEAD REST
WARNING:
Before proceeding with the following repair procedure, review all
warnings and cautions. See WARNING.
2007 Dodge Nitro R/T
2007 ACCESSORIES AND EQUIPMENT Body - Nitro
2. Remove the side shield (4) to expose the seat belt bolts.
3. Position the recliner lever up and remove the seat belt bolts (2) and seat belts (3), refer to REMOVAL .
4. Slide the seats back and remove the front bolts (1).
5. Disconnect the electrical connectors (5).
Fig. 452: Rear Nuts And Bolts
Courtesy of CHRYSLER LLC
6. Slide the seats to forward position and remove the rear nuts (1) and bolts (2).
7. Remove the seats from the vehicle.
INSTALLATION
SEAT - FRONT
Fig. 453: Front Bolts, Seat Belt Bolts, Seat Belts, Side Shield & Electrical Connectors
Courtesy of CHRYSLER LLC
2007 Dodge Nitro R/T
2007 ACCESSORIES AND EQUIPMENT Body - Nitro
1. Install the seats to the vehicle.
2. Slide the seats to the rearward position, connect the electrical connectors (5) and install the bolts (1).
3. Tighten the inboard bolts first then tighten the outboard bolts (1) to 62 N.m (46 ft. lbs.).
4. Install the seat belts (3) and bolts (2), refer to INSTALLATION .
Fig. 454: Rear Nuts And Bolts
Courtesy of CHRYSLER LLC
5. Tighten the rear nuts (1) to 62 N.m (46 ft. lbs.).
6. Tighten the rear bolts (2) to 62 N.m (46 ft. lbs.).
7. Install the side shield (4) to the seats.
8. Install the head rest to the seats.
9. Do not reconnect the battery negative cable at this time. The supplemental restraint system verification
test procedure should be performed following service of any supplemental restraint system component,
refer to STANDARD PROCEDURE .
10. Following successful completion of the supplemental restraint system verification test procedure, perform
the Occupant Classification System Verification Test using a scan tool. Refer to the appropriate
diagnostic procedures.
SEAT BACK - FRONT
REMOVAL
SEAT BACK - FRONT
WARNING:
Before proceeding with the following repair procedure, review all
warnings and cautions. See WARNING.
NOTE:
Start all seat fasteners first before tightening to specifications.
2007 Dodge Nitro R/T
2007 ACCESSORIES AND EQUIPMENT Body - Nitro
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст