Dodge Viper SRT-10 (ZB). Manual — part 248
(9) Position the seat cushion cover flaps back and
install the recliner handle and screw.
(10) Install the seat. (Refer to 23 - BODY/SEATS/
SEAT - INSTALLATION)
SEAT BACK
REMOVAL
(1) Remove the seat. (Refer to 23 - BODY/SEATS/
SEAT - REMOVAL)
(2) Unzip the seat back cover and expose the
recliner bolts.
(3) Remove the recliner bolts and remove the seat
back. (Fig. 7)
INSTALLATION
(1) Install the seat back onto the recliners and
install the bolts.
(2) Tighten the bolts to 28 N·m (21 ft. lbs.).
(3) Complete seat back cover installation by zip-
ping up the cover.
(4) Install the seat. (Refer to 23 - BODY/SEATS/
SEAT - INSTALLATION)
SEAT BACK COVER
REMOVAL
(1) Remove the seat. (Refer to 23 - BODY/SEATS/
SEAT - REMOVAL)
(2) Unzip the seat back cover and expose the
recliner bolts.
(3) Remove the recliner bolts and remove the seat
back. (Fig. 8)
(4) Disconnect the j-straps at the bottom of the
seat back.
(5) Remove the seat back cover hog rings.
Fig. 5 REAR ADJUSTER BOLTS
1 - SEAT ADJUSTER
2 - SEAT CUSHION
3 - REAR ADJUSTER BOLTS
Fig. 6 SIDE ADJUSTER BOLTS
1 - SEAT ADJUSTER
2 - SIDE ADJUSTER BOLTS
3 - SEAT CUSHION
Fig. 7 SEAT BACK
1 - SEAT BACK
2 - SEAT BACK RECLINER BOLTS
3 - RECLINER
4 - SEAT BACK CUSHION/COVER
23 - 84
SEATS
ZB
SEAT ADJUSTERS (Continued)
(6) Position the seat back cover/cushion aside and
release the seat belt pass through bezel locking tabs.
(Fig. 9)
(7) Remove the seat belt pass through bezel.
(8) Remove the seat back cushion cover and cush-
ion.
INSTALLATION
(1) Install the seat back cushion and cover onto
the seat back frame.
(2) Install new hog rings.
(3) Lock j-straps at the bottom of the seat back
(4) Install the seat belt pass through bezel and
seat the locking tabs fully.
(5) Install the seat back onto the recliners and
install the bolts.
(6) Tighten the bolts to 28 N·m (21 ft. lbs.).
(7) Complete seat back cover installation by zip-
ping up the cover.
(8) Install the seat. (Refer to 23 - BODY/SEATS/
SEAT - INSTALLATION)
SEAT BACK RECLINER
REMOVAL
(1) Remove the seat. (Refer to 23 - BODY/SEATS/
SEAT - REMOVAL)
(2) Remove the recliner handle screw and handle,
if equipped.
(3) Position the seat cushion cover aside and dis-
connect the recliner cable. (Fig. 10)
(4) Unzip and position aside the seat back cover.
(Fig. 11)
(5) Remove the recliner bolts and remove the
recliner.
Fig. 8 SEAT BACK
1 - SEAT BACK
2 - SEAT BACK RECLINER BOLTS
3 - RECLINER
4 - SEAT BACK CUSHION/COVER
Fig. 9 SEAT BELT PASS THROUGH BEZEL
1 - BEZEL
2 - LOCKING TAB
3 - LOCKING TAB HOOK
Fig. 10 INBOARD RECLINER
1 - SEAT BELT BUCKLE
2 - RECLINER BOLTS
3 - RECLINER
4 - BELT BUCKLE BOLT
5 - RECLINER CABLE
ZB
SEATS
23 - 85
SEAT BACK COVER (Continued)
INSTALLATION
(1) Install the recliner and install the bolts.
(2) Tighten the bolts so 28 N·m (21 ft. lbs.).
(3) Position the seat back cover and zip closed.
(4) Connect the recliner cable.
(5) Position the seat cushion cover back and install
the recliner handle and screw, if equipped.
(6) Install the seat. (Refer to 23 - BODY/SEATS/
SEAT - INSTALLATION)
SEAT CUSHION ASSEMBLY
REMOVAL
(1) Remove the seat. (Refer to 23 - BODY/SEATS/
SEAT - REMOVAL)
(2) Remove the screw and remove the recliner han-
dle. (Fig. 12)
(3) Remove the seat belt buckle bolt and buckle.
(Fig. 13)
(4) Remove the bolts attaching the recliners to the
seat cushion.
(5) Remove
the
bolts
and
remove
the
child
restraint anchorage bars, if equipped.
(6) Unclip the recliner cable and remove the seat
back assembly. (Fig. 14)
Fig. 11 SEAT BACK
1 - SEAT BACK
2 - SEAT BACK RECLINER BOLTS
3 - RECLINER
4 - SEAT BACK CUSHION/COVER
Fig. 12 RECLINER HANDLE
1 - SEAT CUSHION
2 - SEAT CUSHION COVER
3 - SCREW
4 - RECLINER HANDLE
Fig. 13 INBOARD RECLINER
1 - SEAT BELT BUCKLE
2 - RECLINER BOLTS
3 - RECLINER
4 - BELT BUCKLE BOLT
5 - RECLINER CABLE
23 - 86
SEATS
ZB
SEAT BACK RECLINER (Continued)
(7) Separate seat cushion from seat back.
INSTALLATION
(1) Position the seat cushion assembly and seat
back assembly into place.
(2) Connect recliner cable to the recliner and clip
cable seat frame.
(3) Install the seat back and recliners onto the
seat cushion and install the bolts.
(4) Tighten the bolts to 28 N·m (21 ft. lbs.).
(5) Install the child restraint anchorage bars and
install the bolts, if equipped.
(6) Tighten the bolts to 28 N·m (21 ft. lbs.).
(7) Install the seat belt buckle and install the bolt.
(8) Tighten the bolt to 40 N·m (30 ft. lbs.).
(9) Position the seat cushion cover flaps back and
install the recliner handle and screw.
(10) Install the seat. (Refer to 23 - BODY/SEATS/
SEAT - INSTALLATION)
SEAT CUSHION COVER
REMOVAL
(1) Remove the seat adjuster. (Refer to 23 - BODY/
SEATS/SEAT ADJUSTERS - REMOVAL)
(2) Unclip the recliner cable and remove the seat
back assembly. (Fig. 15)
(3) Disconnect the cushion cover j-straps.
(4) Remove the cover/cushion from the frame.
(5) Remove the hog rings and remove the cover.
INSTALLATION
(1) Install the cover onto the seat cushion foam
and install new hog rings.
(2) Place the cushion/cover onto the cushion frame
and connect the j-straps.
(3) Position the seat back assembly into place and
clip the recliner cable to the frame.
(4) Install the seat adjuster. (Refer to 23 - BODY/
SEATS/SEAT ADJUSTERS - INSTALLATION)
Fig. 14 SEAT CUSHION
1 - RECLINER CABLE/CLIP
2 - SEAT CUSHION
3 - SEAT BACK
4 - J-STRAPS (6)
5 - RECLINER
Fig. 15 SEAT CUSHION
1 - RECLINER CABLE/CLIP
2 - SEAT CUSHION
3 - SEAT BACK
4 - J-STRAPS (6)
5 - RECLINER
ZB
SEATS
23 - 87
SEAT CUSHION ASSEMBLY (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст