Skoda Superb (2021 year). Manual in english — page 11
Storage space and interior equipment › Net partition 217
Inserting
› Pull out the net parti-
tion.
› Insert the end of the
strip marked with in-
› Insert the crossbar into
the mount on one side
to the right-hand
mount and the end of
and push it forwards.
the strip marked
› Fix the bar in the same
with into the left-
way on the other side.
hand mount.
› Open the lid of the
roll-up cover.
Fasten in the front
The procedure is analogous to the process behind.
Stowing the pocket under the variable loading
Ĕoor
Before installing, fold back the rear seat backrests.
› Fold the variable loading Ĕoor in the upper position.
Loosening
› Open and remove the side compartments.
› Open the lid of the roll-up cover.
› Remove the left cover.
› Move the rod first to one side and then to the oth-
er side, and take it out of the supports.
› Hold the pole and allow the net partition to slowly
roll in.
› Open the lid of the roll-up cover.
Remove housing and insert
Removal
› Fold the rear seat backrests forwards.
› Insert the pocket into
the recesses of the
› Open the door at the right rear.
side panel.
› Move and swing out
If the multifunction
the housing.
pocket and the roll-up
cover are stowed at
the same time, the roll-
up cover at the back
must cover the multi-
function pocket.
› Replace the left cover and the side compartments.
› Unfold the variable loading Ĕoor in the upper posi-
tion.
Inserting
› Insert the housing into
the supports and move
Net partition
it.
Attach the net partition
Attach at the back
› Open the lid of the roll-
up cover.
218 Storage space and interior equipment › Floor covering in the boot
Troubleshooting
Removing
› Unhook the straps.
Blocked net partition
› To unlock, press the
lock button.
› Hold the raised cover
in place and press the
underside of the cover
Floor covering in the boot
on both sides.
› Remove the cover.
Folding up and folding down
Inserting
› Insert the mount with
part A and then snap
part B of the mount
into the recess C on
both sides of the boot.
Version 1/Version 2
› Hook in the retaining
NOTICE
straps.
Risk of damage to the hook!
For version 1, the following information applies.
▶ Only hang the Ĕoor covering on the hook.
▶ Before closing the boot lid, remove the Ĕoor cover-
Store the cover behind the rear seats
ing from the hook.
› Insert the cover behind
The Ĕoor covering can be fixed with Version 2 on-
the rear seats.
ly if the variable loading Ĕoor is folded in the upper
position.
Rigid boot cover
Removing and inserting
The maximum load of the other fastening nets is
1 kg.
Storage space and interior equipment › Roll-up luggage compartment cover 219
Roll-up luggage compartment cover
Stowing the cover under the variable loading Ĕoor
›
Fold the variable loading Ĕoor in the upper position.
Operation
› Open and remove the side compartments.
Extending
› Remove the left cover.
› Pull out the cover on
the handle until it clicks
into place.
› Insert the cover into
the recesses of the
Retracting
side panel.
› Press the cover in the
If the roll-up cover and
handle area.
the multifunction bag
The cover rolls up to
are stowed at the same
the intermediate posi-
time, the roll-up cover
tion A .
must cover the multi-
function bag at the
Press again to fully
back.
open the cover.
› Replace the left cover and the side compartments.
It is possible that the
› Unfold the variable loading Ĕoor in the upper posi-
cover rolls more slowly
tion.
during winter weather
conditions.
Variable loading Ĕoor in the boot
Settings
Setting the position
Automatic rewinding of the cover to the inter-
The maximum load of the variable loading Ĕoor is
mediate position
75 kg.
The cover automatically rolls into the intermediate
position when the boot lid is opened.
Set the variable loading Ĕoor to the upper position
The function is activated or deactivated in the fol-
› Lift the variable loading
lowing menu in the Infotainment system:
Ĕoor.
› Pull the variable load-
ing Ĕoor towards you
Or:
and raise it to the
height of the roll-up
cover until you hear an
audible click.
Removing and inserting
› Press the variable load-
ing Ĕoor forward and
Take out and insert the roll-up cover
hang up.
› Press the end of the
crossbar and take out
or insert the cover.
220 Storage space and interior equipment › Storage compartment under the variable loading Ĕoor
Install in the lower position
Storage compartment under the variable
› Lift the variable loading
loading Ĕoor
Ĕoor.
› Pull the variable load-
ing Ĕoor towards you
until it sinks down into
the lower position.
› Press the variable load-
ing Ĕoor forward and
hang up.
Fold the variable loading Ĕoor together
› Lift the variable load Ĕoor and move it forwards.
The variable loading Ĕoor is folded down in the
Partition in the boot
central area.
Removing and inserting
› Fold the variable loading Ĕoor forwards.
Dividing the boot
Removing and inserting the partition
The partition prevents the cargo from slipping.
› Lift the variable loading
Ĕoor and push the rear
The maximum load for the partition is 10 kg.
edge into the grooves
› To remove, pull the se-
A.
curing tab on both
sides upwards and out-
wards and remove the
partition.
Depending on the equipment, the vehicle can be
equipped with a washable storage compartment un-
der the variable loading Ĕoor.
› To insert, engage the
partition in the fixiģ
points A . B or C .
Remove fastening element and insert
The fastening element prevents the cargo from slip-
ping.
The fastening element is attached to the partition on
the variable loading Ĕoor.
Storage space and interior equipment › Partition with fastening element in the boot 221
The maximum load for the fastening element is
› Tighten the strap A
10 kg.
around the skis in front
of the bindings.
› To insert, position the
fastening element in an
› Fold the seat backrest
oblique direction on
a little forward.
the partition and press
downwards.
› Removing takes place
in reverse order.
Move the fastening element
1
Release
2
Moving
3
Applying
› Guide the securing strap B through the opening
around the upper part of the seat backrest.
› Fold the seat backrests back until the locking but-
ton clicks into place.
› Insert the securing strap into the lock until it clicks
Partition with fastening element in the
into place.
boot
WARNING
The maximum weight of the transported skis is 17
The maximum load for
kg.
the partition is 10 kg.
NOTICE
The maximum load for
Risk of damage to the armrest!
the fastening element is
▶ Handle the bag and the skis with care.
10 kg.
Through-loading bag
Insert and lock
In the bag, a max. of 4 pairs of skis with poles can be
transported.
› Fold the rear armrest and the cover in the seat
backrest downwards.
› Place the empty bag in the opening in such a way
that the end of the bag with the zip is in the boot.
› Place the skis with the tips facing to the front and
the poles with the tips facing to the rear into the
bag and close the bag.
222 Storage space and interior equipment › Interior equipment front
Interior equipment front
› Pull the strip to open the compartment.
J
Openable and adjustable armrest with storage
Overview
compartment
There is a USB connection in the compartment.
The USB connection can be used for charging
and for data transfer.
› To open the compartment, lift the armrest.
› Turn the knob to position to open the air
outlet nozzle.
K
Storage tray
Max. load 0.5 kg
A card holder is located in the compartment.
› Pull on the handle to open.
NOTICE
▶ Do not leave any heat-sensitive objects in the
spectacle compartment D.
Interior equipment rear
Overview
A
Make up mirror
B
Ticket holder
C
Car park ticket holder
D
Glasses compartment
Max. load 0.25 kg
› To open, press the button.
E
USB-connection
The USB connection is for charging only.
F
Storage compartment with air outlet nozzle
A pen holder is located in the compartment.
Max. load 3 kg
› Pull the handle to open the compartment.
› Turn the knob to position to open the air
outlet nozzle.
G
Storage tray
▶ Bottle holder with a capacity of max. 1.5 l
▶ Storage compartment for the waste container
▶ Storage compartment for the reĔetive vest
A
Coat hook
Max. load 2 kg
H
Storage compartment (depending on vehicle
equipment):
B
Storage pocket
12-Volt power socket, USB connections, Phone-
C
Depending upon vehicle equipment:
box.
▶ 230 volt socket and USB connections
The USB connections can be used for charging
The USB connections are for charging only.
and for data transfer.
▶ Storage compartment with 12 volt socket
› Press the strip to open/close the compart-
ment.
D
Storage tray
I
Storage tray
▶ Bottle holder with a capacity of max. 1.5 l
A drinks holder is located in the compartment.
▶ Storage compartment for the reĔetive vest
Storage space and interior equipment › Storage pockets on the inner sides of the front seats 223
E
Storage pocket
Bottle tray in the storage compartment
of the front door
WARNING
▶ Only hang light clothing on the hooks. Do not leave
heavy and sharp objects in the pockets of the
clothing.
▶ Do not use hangers to hang clothes.
Storage pockets on the inner sides of the
front seats
The tray is suitable for bottles with a max. size of 1.5
l.
Bottle tray in the storage compartment
of the rear door
Car park ticket holder
The tray is suitable for bottles with a max. size of 1.5
l.
224 Storage space and interior equipment › USB-connections
USB-connections
The USB connections are for charging only.
The USB connection is for charging only.
Hook on the centre body pillar
The USB connections can be used for charging and
for data transfer.
The maximum load for the hook is 2 kg.
WARNING
▶ Only hang light clothing on the hooks. Do not leave
heavy and sharp objects in the pockets of the
clothing.
▶ Do not use hangers to hang clothes.
Storage space and interior equipment › Glasses compartment 225
Glasses compartment
Storage compartment for cards, coins
and SD card
The maximum load for the compartment is 0.25 kg.
NOTICE
▶ Do not leave heat-sensitive objects behind in the
Storage compartment for cards in the
glasses compartment.
storage area on the driver's side
Pen holder
Storage compartment for an umbrella
Overview
226 Storage space and interior equipment › Phonebox
NOTICE
Troubleshooting
Risk of damage to the bodywork and the interior
A message has been displayed on the Infotainment
trim of the vehicle!
screen indicating that the mobile phone cannot be
▶ In the storage compartment, only insert the um-
charged.
brella from the ŠKODA original accessories.
▶ Always push the umbrella into the storage com-
▶ Check that there is no object between the support
partment as far as it will go.
and the phone to be charged. If this is the case, re-
move the phone and the item. Place the phone
centrally on the phone symbol on the pad again.
Phonebox
▶ Check that the position of the phone to be charged
has not changed. If this is the case, remove the
What you should be mindful of
phone and put it back in the centre of the phone
symbol on the pad.
CAUTION
Risk of burns during charging.
▶ The phone may get warm, remove it carefully from
Cup holder
the storage compartment.
▶ Do not leave any metal objects in the compartment
Overview
under the phone. If there is a metallic object in the
storage compartment, which has become hot, re-
Cup holder at the front
move the phone and let it cool down in the storage
› Press on the bar to
compartment!
open.
In the centre console
holder area, a bottle can
Functionality
be opened with one
Phonebox functions
hand.
▶ Wireless charging of phones.
› Press the bottle into
▶ AmplifiatioÄ of the telephone signal (only valid for
the holder and un-
some countries).
screw the cap.
The Phonebox is located in the storage compartment
Rear cup holder
in the centre console at the front.
Insert a telephone with a maximum size of 146x80
› To open it, open the lid.
mm into the storage compartment.
Charging Indicator
When the phone is charging, the in the status bar in
the infotainment screen will light up.
Recommendations for optimal function
▶ The phone is positioned with the screen facing up.
▶ Insert the phone without the protective case.
▶ Position the phone centrally on the phone symbol
on the pad.
CAUTION
Risk of scalding!
▶ Never put hot beverage containers in the drinks
Operating conditions
holder.
NOTICE
Conditions for wireless charging
Danger of damage to the electrical system and the
✓ The ignition is switched on.
panels from spilled drinks.
✓ The phone supports the Qi standard.
✓ There is no object between the pad and the
phone.
Storage space and interior equipment › Cup holder Easy Open 227
Cup holder Easy Open
Ashtray with removable insert
In the centre console
holder area, a bottle can
be opened with one
hand.
Cigarette lighter
› Push in the lighter.
Waste container
› Wait until the glowing
Replace bags
lighter pops back out.
› Remove the lighter and
use.
› Push the lighter back
in.
The socket of the ciga-
rette lighter serves as a
12-Volt socket.
Ceiling
Removing and inserting
Ashtray and cigarette lighter
The blanket is in a bag that can be attached to one of
the following locations:
What you should be mindful of
▶ On the guide rods of the front headrests
CAUTION
▶ In the storage pockets on the backs of the front
Risk of burning or fire!
seats
▶ Do not use the ashtray for storing hot or burning
objects.
▶ Handle the lighter carefully.
Tablet holder
Settings
Operation
Tilt and turn
Removable ashtray
The ashtray is inserted in
the cup holder.
NOTICE
▶ When removing, do not hold the ashtray by the lid.
228 Storage space and interior equipment › Storage compartment for the tablet
Adjust size
› Press on the adapter
and remove it.
› Pull out the locking tab
and move the upper
part of the holder to
the desired position.
Set the minimum size of
the empty holder to
avoid noise while driving.
Insert into the rear armrest
› Clip the holder into the
opening.
Removal and Insertion
Fasten behind the headrests
› Place the open adapter
on the front guide rods
of the headrest and
clip in carefully.
Removal
› Press the safety button
and unfold the holder.
› Clip in the holder in the
adapter.
Technical data
Removal
The holder is for fixiģ a tablet with a height of min.
11.5 cm and max. 19.5 cm.
› Press the safety button
and unfold the holder.
The maximum load for the holder is 0.75 kg.
Storage compartment for the tablet
Operation
› Pull at the loop A to
open.
Storage space and interior equipment › 12-Volt power socket
229
12-Volt power socket
230 volt socket and USB connections
Operating conditions
NOTICE
Risk of damage to the electrical system of the vehi-
cle!
▶ Use the sockets only for the connection of ap-
proved electrical accessories with a total power
consumption of up to 120 watts.
NOTICE
Danger of damage to the connected consumers!
▶ Switch off the consumers before switching the ig-
nition on or off and before starting the engine.
230-Volt power socket
Functionality
NOTICE
Danger of damage to the connected consumers!
▶ Do not connect a light with ĔuoreseÄt lamp to the
socket.
▶ Switch off the consumers before switching the ig-
The USB connections are for charging only.
nition on or off and before starting the engine.
Status display
Storage compartment with air outlet
▶ Lit up in green - the socket is switched on.
nozzle
▶ Blinking green - the socket is still switched on for
about 10 minutes after the engine has been
Overview
switched off, if a consumer was connected before
the engine was switched off.
In the compartment, there is a card holder and a pen
holder.
The socket has a child safety lock. When insert-
ing the plug, the fuse is unlocked and the socket is
The maximum load for the compartment is 3 kg.
switched on.
› Turn the knob in the compartment to position to
open the air outlet nozzle.
Operating conditions
✓ Running engine
On vehicles with the START-STOP system, the
socket also works in STOP mode.
Troubleshooting
The indicator light Ĕashes red
The socket is turned off e.g. for the following rea-
sons:
▶ Excessive current
▶ Low state of charge of the 12-volt vehicle battery
▶ Overheating of the socket
› If the reasons given above no longer exist and the
socket is not switched on automatically, discon-
nect the connected load from the socket and re-
connect after a short time.
230 Roof rack and hitch › Roof rack
Roof rack and hitch
Tow bar: swivel out/in
Swing out the tow bar
Roof rack
› Pull on the handle. The
Technical data
tow bar swings out.
The indicator light next
The maximum weight of the load incl. roof rack is
to the handle Ĕashes
100 kg.
red.
› Slowly retract the han-
dle.
› Press the tow bar until
it audibly clicks into
place.
Check latching: the in-
dicator light next to
Depending on the equipment, the roof bars can be
the handle lights up
attached at the attachment points A and B or to
green.
the roof rail.
Swivelling hitch
Swivel tow bar
What you should be mindful of
NOTICE
▶ No trailer or any other accessory can be connected
Applies to natural gas vehicles.
to the tow bar.
WARNING
▶ A socket or adapter may not be plugged into the
An improperly installed or unsuitable tow hitch can
socket.
damage the natural gas reservoir of the vehicle in an
› Pull on the handle. The
accident and thus deepen the consequences of the
tow bar is unlocked.
accident or cause fatal injuries.
The indicator light next
▶ Due to the speifi structure of the vehicles with
to the handle Ĕashes
natural gas reservoirs, we recommend using only
red.
the original ŠKODA tow hitch. With these accesso-
ries, ŠKODA stands for safety, reliability and suita-
› Slowly retract the han-
dle.
bility for this vehicle type.
▶ We recommend that all related assembly work be
carried out by ŠKODA service partners.
WARNING
› Swing in the tow bar
Risk of an accident!
under the bumper until
▶ Do not manipulate the handle for swinging the tow
it audibly clicks into
bar in and out while a trailer or another accessory
place.
is coupled to the tow bar. The tow bar could be un-
Check latching: the in-
locked.
dicator light next to
CAUTION
the handle lights up
Risk of injury!
green.
▶ Handle the trailer coupling carefully.
▶ When swinging out the tow bar, do not stand in
the middle area of the rear bumper.
NOTICE
Coupling or uncoupling a trailer or accessory
Risk of damage to the trailer coupling!
The following information describes the procedure
▶ When not using the towing device, swing the tow
for coupling and uncoupling a trailer. The information
bar under the bumper.
also refers to another accessory, e.g. a bike carrier.
Roof rack and hitch › Swivelling hitch
231
WARNING
Technical data
Risk of an accident!
Tow hitch attachment points
▶ Do not use the safety eye for towing.
▶ Distribute and fix the load correctly.
The trailer has a 13-pin electrical socket. If the
trailer has a 7-pin connector, use a corresponding
adapter from the ŠKODA Original Accessories.
Coupling
› Swing out the tow bar.
› Put the trailer drawbar onto the ball head.
› Plug the electrical trail-
er plug into the socket
A.
› Hook the tear-off rope
of the trailer onto the
safety eye B . The
tear-off rope must sag
against the vehicle in
all trailer positions.
Uncoupling
Uncoupling takes place in reverse order.
Power supply of the trailer power network
In the electrical connection between the vehicle and
A
Distance of the attachment points
trailer, the trailer is powered by the vehicle.
B
Length of the rear overhang to the centre of the
NOTICE
ball head
Risk of damage to the vehicle electronics!
C
Distance of the front attachment point to the
The total power consumption of all consumers con-
centre of the ball head
nected to the trailer power supply must not exceed
350 watts.
D
Distance of the rear attachment point to the
centre of the ball head
E
Distance of the rear bumper to the centre of the
Troubleshooting
ball head (according to the ECE-55 standard)
Trailer coupling error
F
Distance from the centre of the ball head to the
The indicator light next to the handle does not light
road (according to the standard ECE-55)
up green, or the tow bar does not lock into place.
G
Fastening points on the body
› Do not use the trailer coupling.
In mm
› Seek the help of a specialist garage.
A
1039.9
Tow bar not locked
B
1196.2
illuminates
C
564.2
› Engage the tow bar.
D
344.2
E
min. 65
F
350-420
Maximum vertical load for trailer operation
The maximum vertical load for trailer operation de-
pends on the engine type and the vehicle equipment.
The valid speifiatioÄ for your vehicle can be found
in the technical vehicle documentation, (e.g. vehicle
approval documentation, the COC document) or at a
ŠKODA partner.
232 Maintaining and cleaning › Service events
Other information (e.g. on the nameplate of the trail-
Maintaining and cleaning
er device) merely provides information on the test
values of the device.
Service events
Support load with mounted accessories
service intervals
When using the accessories (e.g. bicycle carrier), the
Compliance with service intervals is crucial for the
maximum length and the permissible total weight in-
life and value of the vehicle.
cluding load must be considered.
You will be Äotified of the due date for service with
The maximum length of the mounted accessories
the symbol and the corresponding message on the
(from the ball of the towing device) may not exceed
display of the instrument cluster.
70 cm.
The specialist garage will inform you of the type of
The permissible total weight of the mounted acces-
service interval, the option of changing this and the
sories including its load corresponds to the maxi-
scope of service.
mum vertical load for trailer operation; the value can
be found in the vehicle registration documentation.
All services and the replacement or refilliģ of op-
erating Ĕuids are chargeable to the customer, even
If the maximum load in trailer operation is more than
during the warranty period, unless the ŠKODA AUTO
75 kg, then the permissible total weight of the
warranty conditions or other binding agreements de-
mounted accessories including their load must not
termine otherwise.
exceed 75 kg.
Proof of service
This value applies if the centre of gravity is at a dis-
A specialist garage stores the proof of service in the
tance of no more than 30 cm from the towing device
information system called Digital Service Plan.
ball head.
The proof of service can be printed out.
If the distance of the centre gravity of the load to
the ball head of the towing device is greater than
Displaying the service due date in the Infotainment
30 cm, then the max. permissible total weight of the
system
accessory, including its load, decreases (e.g. at a dis-
› In Infotainment, select the following menu:
tance of 60 cm from the ball head, the permissible
Menu item for the Service
weight decreases by half).
Or:
If the distance between the centre of gravity of the
load and the ball head of the towing hitch is 70 cm,
Menu item for the Service
the permissible total weight of the accessories in-
Resetting information
cluding their load is reduced to 0 kg.
We recommend that you do not reset the informa-
WARNING
tion regarding service events on your own. It can
Risk of an accident!
lead to incorrect setting of the service intervals and
▶ Do not exceed the maximum vertical load.
thus also to possible faults in the vehicle.
▶ The permissible trailer load and the weight of an-
For vehicles with a variable service interval, new
other accessory, e.g. of the bike carrier, is not to be
service interval values calculated according to the
exceeded.
previous operating conditions will be displayed after
NOTICE
the oil change service indicator is reset. These values
Risk of damage to the trailer and the vehicle itself!
will then continue to be adjusted according to the
▶ When using the accessory (e.g. bicycle carrier), ob-
current operating conditions.
serve the maximum length and the permissible to-
tal weight of the accessory incl.
Service work, adjustments and technical
changes
The instructions and guidelines from ŠKODA AUTO
must be observed when carrying out any modifia-
tioÄs, repairs or technical alterations to the vehicle.
Adhering to these instructions and guidelines helps
ensure road safety and helps keep the vehicle in a
good technical condition.
We advise only using ŠKODA Original Accessories
and ŠKODA Original Parts which have been expressly
approved for use on your vehicle. Reliability, safety
Maintaining and cleaning › Interior 233
and suitability for your vehicle are guaranteed with
non-legitimate installation in another vehicle (e.g. af-
these.
ter a theft) or operation outside the vehicle.
ŠKODA Service partner
All ŠKODA service partners work according to the
Interior
instructions and guidelines from ŠKODA AUTO.
Service and repair work is therefore carried out on
What you should be mindful of
time and at the appropriate quality. Adhering to
these instructions and guidelines helps ensure road
NOTICE
safety and helps keep the vehicle in a good technical
▶ Use cleaning agents intended for cleaning and care
condition.
of the individual materials.
▶ Do not use aggressive cleaning agents or chemical
We therefore advise having all modifiatioÄs, repairs
solvents.
and technical alterations to the vehicle carried out by
a ŠKODA Service Partner.
Natural leather / Faux leather / Alcantara ® / Sue-
ŠKODA original parts
dia / material
We recommend the use of ŠKODA Genuine Parts for
NOTICE
your vehicle, as these parts are approved by ŠKODA
▶ Remove impurities as soon as possible.
AUTO. These parts comply wholly with ŠKODA AU-
▶ Do not use solvents, Ĕoor wax, shoe cream, stain
TO regulations and are identical to the parts used in
remover or similar agents on Alcantara® and Suedia
series production.
suede seat upholstery.
ŠKODA AUTO is able to warrant the safety, suitabili-
▶ Make sure that natural leather is not moistened
ty, and long life of these products.
when cleaning and that no water seeps into the
ŠKODA Service Partners are liable for any defects of
seams.
ŠKODA Genuine Parts for a period of 2 years after
▶ Do not clean the roof cladding with a brush.
sale in accordance with the materials defect liability,
NOTICE
unless agreed otherwise in the purchase agreement.
Risk of fading to the cover fabric!
ŠKODA original accessories
▶ If necessary, do not leave the covers for long peri-
We recommend that you use ŠKODA Genuine Ac-
ods in the blazing sun.
cessories in your vehicle. With these accessories,
ŠKODA AUTO stands for safety, reliability and the
▶ During use, the leather and Alcantara®- and Suedia
suitability for your vehicle type.
and materials may show minor changes (e.g. folds
ŠKODA Service Partners are liable for any defects of
or discolouration). This does not constitute a mate-
ŠKODA Genuine Accessories for a period of 2 years
rial defect.
after installation or delivery in accordance with the
▶ Some clothing fabrics, e.g. dark denim, sometimes
materials defect liability, unless agreed otherwise in
do not have suffiieÄt colour fastness. As a result,
the purchase agreement or any other agreements.
discolouration that is clearly visible on the seat up-
holstery can occur. This is not a defect in the fab-
Spoiler
ric.
WARNING
▶ Sharp-edged zippers, rivets, clamps and similar
Risk of an accident!
garments can damage the upholstery in the vehi-
▶ Only use the original spoiler on the front bumper in
cle. Such damages cannot be subsequently recog-
combination with the original spoiler on the boot
nised as a justified complaint.
lid.
Plastic parts
▶ The original spoiler on the front bumper cannot be
left on its own without the spoiler on the luggage
NOTICE
compartment lid or in combination with an unsuita-
Risk of damaging the dash panel!
ble spoiler on the luggage compartment lid.
▶ Do not attach fragrances and air fresheners to the
▶ We recommend that you consult the ŠKODA Serv-
dash panel.
ice Partner for any repairs to or replacement, addi-
Windows
tion or removal of spoilers.
NOTICE
Component protection
Risk of damage to the filameÄts or the glass antenna!
Some electronic vehicle components (such as the in-
▶ Do not stick stickers on the heating filameÄts.
strument cluster) are factory-equipped with compo-
▶ Do not use sharp objects (such as pot scrapers,
nent protection. This component protection ensures
etc.) to clean the windows.
the functional limitation of these components in a
234 Maintaining and cleaning › Exterior
Covers on electrically heated seats
Exterior
NOTICE
What you should be mindful of
Risk of damaging the heating system!
▶ Do not clean the seats with water or other liquids.
WARNING
▶ Do not dry the seats by switching on the heating.
Risk of accident!
After washing the vehicle, the functionality of the
Seat belts
brake system may be affeted by moisture and, in
NOTICE
winter, by ice.
Risk of damage to the seat belts!
▶ Dry and clean the brakes by braking several times.
▶ Do not dry clean the seat belts.
NOTICE
▶ Allow cleaned belts to dry before rolling up.
▶ Bird droppings, insect residues, litter and sea salt
residues, overĔoõed fuel,AdBlue® etc. are to be re-
moved as soon as possible.
Instructions for cleaning
▶ Do not use rough sponges, scourers or similar to
Natural leather / Faux leather / Alcantara ® / Sue-
remove dirt.
dia / material
▶ Use cleaning agents intended for cleaning and care
› Remove dust and dirt on the surface with a vac-
of the individual materials.
uum cleaner.
▶ Do not use aggressive cleaning agents or chemical
› Remove fresh impurities with water, slightly mois-
solvents.
tened cotton cloth or woollen cloth; if necessary,
▶ Do not polish the vehicle in a dusty environment.
use a mild soap solution 1) and wipe with a dry
NOTICE
cloth.
AdBlue® picks up some materials, e.g. paint and plas-
› Remove stubborn stains with a suitable cleaning
tics.
agent.
▶ Clean the affeted area with a damp cloth and cold
› For regular care of natural leather, use the equip-
water.
ment provided for this purpose. After each clean,
▶ Remove any dried solution with warm water and a
use a care cream with light protection and impreg-
sponge.
nation effet.
NOTICE
› When looking after Alcantara®-, Suedia and and
▶ Paint damage should be repaired as soon as possi-
fabric surfaces, remove stubborn hair with a clean-
ble.
ing brush. Remove pills from materials with a
brush.
▶ Do not treat matt lacquered parts with polish or
hard wax.
Plastic parts
▶ Do not polish foils.
› Remove impurities with water, slightly moistened
▶ We recommend treating door seals and window
cloth or sponge with a suitable cleaning agent if
guides with the appropriate tools from ŠKODA
necessary.
original accessories. These ensure that the protec-
Windows
tive lacquer layer of the seals and window guides is
› Remove impurities with clean water and dry with a
not attacked.
cloth provided for this purpose.
▶ Do not use abrasive cleaning agents to clean the
rear view camera.
Infotainment screen
› Remove any impurities on the screen using the
Before driving through a car wash
cleaning agents provided.
› Observe the usual speifiatioÄs of the car wash,
e.g. close all windows, fold the mirrors, etc.
NOTICE
Danger of screen damage!
› Move the windscreen wiper lever to position
▶ When removing dirt, do not press on the screen.
to adjust.
› If there are special attachments on your vehicle,
Covers on electrically heated seats
observe the instructions of the car wash operator.
› Remove impurities with a suitable cleaning agent.
NOTICE
Seat belts
▶ Deactivate the Auto Hold function if it is necessary
› Remove impurities with a soft cloth and mild soap
to roll the vehicle when passing through a car
solution.1)
wash.
1)
A mild soap solution consisting of 2 tablespoons of white neutral soap to 1 litre of lukewarm water.
Maintaining and cleaning › Exterior 235
NOTICE
▶ Use a differeÄt sponge for wheels, sills and the
In vehicles with an electric luggage compartment lid,
lower part of the vehicle than that used for the
this can open automatically due to the pressure of
other vehicle parts.
the washing brushes.
▶ Do not wash the vehicle in the blazing sun.
▶ Lock the vehicle, e.g. with the central lock button.
▶ Do not dry the headlights or use sharp objects.
After washing with a wax preservation
▶ Do not put pressure on the bodywork when wash-
› Wipe off the windscreen wiper blades with a dry
ing.
cloth.
▶ The temperature of the washing water may be a
max. 60 °C.
Wash with a pressure washer
After hand washing
NOTICE
› Rinse the vehicle and wipe it with a suitable clean
▶ Follow the operating instructions for the high-
cloth.
pressure cleaner, in particular the instructions re-
lating to the pressure and the spray distance to the
Vehicle paint
vehicle surface.
› Preserve the varnish at least twice a year with hard
▶ Do not direct the water jet directly at the following
wax.
vehicle parts
› Use a polish for matt lacquers.
▶ Films
Films
▶ Lock cylinder
Films will age and become brittle - this is entirely
▶ Columns on the vehicle
normal: this is not an error.
▶ Trailer connection
The following factors have a negative effet on the
▶ Swivelling ball bar
life or colour fastness of the films:
▶ Camera lenses and sensors
▶ Sun rays
▶ Plastic, chromed and anodised parts
▶ moisture
Remove snow and ice
▶ Air pollution
NOTICE
▶ Stones, e.g. due to the rebound of the cargo during
▶ Remove snow and ice with a plastic scraper or a
transport on the roof rack
suitable deicing agent.
Protection of hollow spaces
▶ Clean the cameras with a hand brush.
Corrosion-prone cavities of the vehicle are perma-
▶ Only move the scraper in one direction.
nently protected by preservative wax at the factory.
▶ Do not use scratchers or other sharp objects for
› Remove spilled wax with a plastic scraper, clean
foils.
stains with mineral spirits.
▶ Do not remove snow and ice with hot or warm wa-
ter.
Underseal
▶ Do not remove snow and ice from surfaces with
The underside is permanently protected by the fac-
coarse dirt.
tory against chemical and mechanical iÄĔueÄes.
› Have the protective coating checked by a special-
ist garage before starting and at the end of the
Instructions for cleaning
cold season.
Handwash
Wheels
› Wash the vehicle from top to bottom with a soft
› After washing, preserve the wheels with suitable
sponge or wash glove and plenty of water, if nec-
means.
essary with additional suitable cleaning agents.
WARNING
› For foils and headlights, use a mild soap solution
Risk of an accident!
that contains two tablespoons of white neutral
▶ Severe dirt on the wheels can result in the wheels
soap to one litre of lukewarm water.
unbalancing.
› Use a glass cleaner for the windscreen wiper
blades.
Car jack
› If necessary, treat moving parts with suitable
› Wash the cameras with clean water and dry with a
grease.
suitable clean wipe.
NOTICE
Tow hitch
▶ Wash out the sponge or wash mitt regularly.
› Coat the ball head of the towing device with a suit-
able grease whenever necessary.
236 Maintaining and cleaning › Ice scraper
Ice scraper
Technical data and specificatioÄs
On the fuel filler Ĕap
Requirements for the technical data
The emission standard, information on fuel con-
sumption and other information pertaining to your
vehicle can be found listed in the technical vehicle
documentation and in the declaration of conformity
(in the so-called COC Document).
The information listed was determined in accord-
ance with rules and under conditions that are stipula-
ted by legal or technical regulations.
This and other information about your vehicle and
the declaration of conformity can be obtained from a
ŠKODA Partner.
The details in the technical vehicle documentation
and in the declaration of conformity take prece-
These speifiatioÄs and values apply to your vehicle
in its condition and oÄfi£uratioÄ at the time of deliv-
ery from the manufacturer. Retrofittiģ an accessory
can have a negative impact on this information and
values, in particular the values regarding fuel con-
sumption and carbon dioxide (CO2), which are speci-
fied in the vehicle documentation and in the declara-
tion of conformity.
The performance values listed were determined
without performance-reducing equipment, e.g. air
conditioning system.
Vehicle ideÄtificatioÄ data
Vehicle ideÄtificatioÄ number (VIN)
The vehicle ideÄtifiatioÄ number is found at the fol-
lowing locations:
▶ Directly in the engine compartment on the suspen-
sion turret
▶ On a plate under the windscreen in the lower left
corner
▶ On the type plate at the bottom of the middle
body pillar of the vehicle
Type plate
A
Vehicle manufacturers
B
Vehicle ideÄtifiatioÄ number (VIN)
Technical data and specificatioÄs › Maximum permissible weights
237
VIN display
The engine output falls as the height increases, as
The display of the VIN takes place in the infotain-
does the ability to climb.
ment in the following menu item:
Therefore, for every additional 1,000 m in height (or
Menu item for the Service
part), the maximum permissible towed weight must
be reduced by 10 %.
Or:
The towed weight is made up of the actual weights
Menu item for the Service
of the loaded towing vehicle and the loaded trailer.
Engine number
Payloads
The engine number is embossed on the engine block.
It is possible to calculate the approximate maximum
payload from the differeÄe between the permissible
total weight and the operating weight.
Maximum permissible weights
The payload consists of the following components:
The maximum permissible weights are listed on the
▶ The weight of the passenger
nameplate.
▶
The weight of all luggage and other loads
The type plate is located at the bottom of the middle
▶ The weight of the roof, including the roof rack sys-
body pillar of the vehicle.
tem
▶ The weight of the equipment that is excluded from
the operating weight
▶ Trailer bearing load for trailer towing » page 231
WARNING
Risk of accident and danger of vehicle damage!
▶ Do not exceed the speified values for the maxi-
mum permissible weights.
Operating weight
A
Maximum permissible gross weight
Information about the operating weight
B
Maximum permissible towed weight (towing ve-
hicle and trailer)
The speifiatioÄ corresponds to the lowest possible
C
Maximum permissible front axle load
operating weight without additional weight-increas-
ing equipment. This includes 75 kg driver's weight,
D
Maximum permissible rear axle load
the weight of the operating Ĕuids and the on-board
Maximum permissible towed weight
tool kit and a fuel tank filled to min. 90%.
The speified value is valid for altitudes up to 1000
m above sea level.
Operating weight
Operating weight (kg)
Engine type
Gearbox
Superb
Superb Combi
1.4 l/110 kW TSI
DSG a)
1443
1465
Manual gearbox
1467
1482
1.5 l/110 kW TSI
DSG a)
1477
1492
2.0 l/140 kW TSI
DSG a)
1535
1557
2.0 l/162 kW TSI
DSG a)
1510
1532
2.0 l/206 kW TSI
DSG a) 4X4
1620/1655 b)
1642/1670 b)
2.0 l/90 kW TDI CR
DSG a)
1552
1574
Manual gearbox
1555
1577
2.0 l/110 kW TDI CR
DSG a)
1585
1607
2.0 l/130 kW TDI CR
DSG a)
1545
1567
DSG a)
1576
1598
2.0 l/147 kW TDI CR
DSG a) 4x4
1652
1674
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст