Skoda Superb (2021 year). Manual in english — page 9
Driver assist systems › Braking and stabilising systems 175
Settings
Driver assist systems
Activation/deactivation
Braking and stabilising systems
› Press the
button.
Activation is indicated by the illumination of the
Overview
symbol in the button.
Stabilisation control (ESC)
NOTICE
ESC helps to stabilize the vehicle in borderline situa-
Disable Auto Hold to allow the vehicle to roll if nec-
tions (e.g. when the vehicle starts to skid). ESC
essary when driving through a car wash.
brakes the individual wheels to maintain the direc-
tion of travel.
Ĕashes - ESC is engaged
ESC Sport
ESC Sport allows for a sportier driving style.
lit up - ESC Sport is activated
Traction control (TCS)
ASR helps to stabilize the vehicle when accelerating
or driving on low-grip roads. ASR reduces the drive
power transmitted to the wheels when the wheels
spin.
Ĕashes - ASR is engaged
Antilock braking system (ABS)
ABS helps maintain control of the vehicle during
emergency braking. An ABS intervention is noticea-
ble by pulsating movements of the brake pedal.
Motor Slip Regulation (MSR)
MSR helps to maintain control of the vehicle in the
event of a sudden reduction in speed, e.g. on icy
roads. If the drive wheels lock, MSR increases the
engine speed. This reduces the braking effet of the
engine and the wheels can rotate freely again.
Electronic DiffereÄtial Lock (EDL)
EDL helps to stabilize the vehicle when driving on
road surfaces with differeÄt grip under the individual
wheels. EDL brakes a spinning wheel and transmits
power to a differeÄt drive wheel.
Electronic DiffereÄtial Lock (XDL+)
XDL + helps to stabilize the vehicle during fast cor-
nering by braking the inside wheel of the driven axle.
Active steering assistance (DSR)
In diffiult situations, the DSR provides the driver
with a steering recommendation in order to stabilise
the vehicle.
Hill Hold Control
Hill Hold Control helps when starting off on uphill
gradients by braking the vehicle for about 2 seconds
after the brake pedal is released.
Operating conditions
✓ The gradient is at least 5%.
✓ The driver's door is closed.
176 Driver assist systems › Front Assist
Multi-Collision Brake (MCB)
Or:
MCB helps to decelerate and stabilize the vehicle af-
› In Infotainment, select the following menu:
ter a collision with an obstacle. This reduces the risk
of further collisions.
Or:
Operating conditions
✓ There has been a frontal, side and rear collision of
a certain severity.
When activated, lights up in the instrument clus-
✓ The impact speed was greater than 10 km/h.
ter.
✓ The brakes, ESC and other required systems re-
goes out when deactivated.
mained functional after the impact.
✓ The accelerator pedal is not pressed.
Trailer Stability Assist (TSA)
Troubleshooting
TSA helps to stabilize the trailer. As the trailer begins
ESC or ASR faulty/deactivated by the system
to lurch, TSA stabilizes the trailer by slowing down
illuminates
the individual vehicle wheels.
› Stop the engine and start again.
Operating conditions
✓ The hitch was supplied from the factory or pur-
› If the indicator light does not go out after covering
a short distance, seek the help of a specialist ga-
chased from ŠKODA Genuine Accessories.
rage.
✓ The trailer is connected to the trailer socket.
✓ ASR activated.
ABS faulty
✓ The driving speed is higher than 60 km/h.
illuminates
Electromechanical brake booster (eBKV)
› You may continue driving, exercising appro-
eBKV (electronic brake force distribution) facilitates
priate caution. Seek the help of a specialist garage.
operation of the brake pedal.
Brake system and anti-lock braking system faulty
After switching off the ignition, the eBKV (electronic
illuminates together with
brake force distribution) function is either restricted
or not available.
› Stop driving! Seek the help of a specialist ga-
rage.
If the vehicle is decelerated using an assistance
system, pulsating movements of the brake pedal can
Electromechanical brake booster faulty
occur.
illuminates
› Stop driving! Seek the help of a specialist ga-
Settings
rage.
Deactivating/activating ASR
› Press the button.
Front Assist
Or:
Functionality
› In Infotainment, select the following menu:
Front Assist monitors the distance to the vehicle
ahead and points out when the safety distance is ex-
Or:
ceeded. In borderline situations, it helps to avoid a
collision by braking interventions.
When deactivated, lights up in the instrument
Status display in the instrument cluster display
cluster.
illuminates - safety distance too small
goes out on renewed activation.
illuminates - warning in case of collision
Deactivating the ASR may be helpful in the following
situations:
▶ Driving with snow chains
Automatic braking if there is a risk of a collision
If there is a risk of a collision, the following symbol is
▶ Driving in deep snow or on very loose ground
illuminated as a warning
from the isolation box. If
▶ Starting up a vehicle that is stuck
you do not respond to the warning, the vehicle will
Activate/deactivate ESC Sport
slow down.
› Keep the button pressed down.
Driver assist systems › Pedestrian detection system 177
At a driving speed of up to 30 km / h, the vehicle is
Or:
braked without prior warning.
illuminates together with
Automatic braking can be stopped by pressing the
accelerator pedal or by a steering intervention.
› Clean the front radar sensor.
With automatic braking, the pressure in the brake
› Stop the engine and start again.
system increases. The brake pedal cannot be operat-
› If Front Assist is still unavailable, check the brake
ed by using the pedal as normal.
lights on the vehicle or on the attached trailer.
WARNING
› If the brake lights are working and Front Assist is
still unavailable, seek the help of a specialist ga-
Risk of an accident!
rage.
Front Assist does not respond to crossing or oncom-
ing vehicles.
There was an unfounded warning or system inter-
vention
› Clean the front radar sensor.
Operating conditions
› If the system is not working properly, disable Front
✓ The parking aid is activated.
Assist and seek the help of a specialist garage.
✓ The driving speed is higher than 5 km/h.
Pedestrian detection system
Function restriction
Functionality
The function may be restricted or unavailable in the
Pedestrian recognition helps to prevent a collision
following cases:
with crossing pedestrians by enabling automatic
▶ About 30 seconds after starting
braking interventions.
▶ When driving around a sharp bend
Status display in the instrument cluster display
▶ During an ESC intervention
lights up - Danger of collision
Settings
Risk of collision in a speed range of 5-30 km/h
The system triggers automatic braking.
Automatic activation
Front Assist is automatically activated when the igni-
Risk of collision in a speed range of 30-60 km/h
tion is switched on.
The system warns of a collision hazard first. If the
driver does not respond, the vehicle is automatically
Activation/deactivation in the instrument cluster
braked.
› Press the button on the multifunction steering
wheel.
› Select Front Assist .
Operating conditions
Activation/deactivation in Infotainment
✓ Front Assist is deactivated.
In the menu
✓ The vehicle speed is 5-60 km/h.
Show system deactivation in the display of the in-
strument cluster
Speed limiter
illuminates together with
Functionality
or
The speed limiter controls the maximum driving
illuminates together with
speed according to the set speed limit.
If the limit is exceeded when driving downhill, brake
Deactivate Front Assist when handling the vehi-
the vehicle with the brake pedal.
cle on a truck, a car ferry etc.
Status display in the instrument cluster display
illuminates - the cruise control is activated.
Troubleshooting
ĔashiÄ£ - the set limit is exceeded
Front Assist is not available
When the regulation starts highlighted and the
illuminates together with
set limit is displayed.
178 Driver assist systems › Cruise control system
Operating conditions
Variant with ACC
✓ The driving speed is higher than 30 km/h.
Operation
Variant with cruise control
Activate ACC (condition for the subsequent
activation of the limiter). To enable the speed
A
Activate cruise control (condition for the
limiter, press the button and in the multi-
subsequent activation of the limiter).
function steering wheel and in the instrument
To enable the speed limiter, press the button D
cluster choose the menu item Speed limit .
and in the instrument cluster choose the menu
Resume control 1) / Increase limit in steps of
item Speed limit .
1 km/h (sprung position)
Deactivate limiter
Stop control (sprung position)
Interrupt control (sprung position)
Deactivate the limiter
B
Resume control1) / Increase limit
Increase limit in steps of 10 km/h
C
Start control with current speed / Reduce
Decrease limit in steps of 10 km/h
limit
Start control/Reduce limit in steps of 1 km/h
D
Show menu of assist systems - Possibility of
switching between cruise control and speed lim-
Limit exceeded
iter
› Fully depress the accelerator.
Switching to cruise control interrupts the con-
Control will continue as soon as the vehicle has de-
trol.
celerated to below the set limit.
Adjusting the speed limit with the buttons B and
C
Troubleshooting
By pressing in steps of 1 km/h.
By holding in steps of 10 km/h.
Speed limiter faulty
illuminates
› Seek the help of a specialist garage.
Cruise control system
Functionality
The cruise control system maintains the set speed
without the accelerator pedal having to be operated.
This, however, is only possible to the extent permit-
ted by the engine output and braking power of the
vehicle.
1)
If no speed limit is set, the current speed is set as the speed limit.
Driver assist systems › Adaptive Cruise Control (ACC) 179
WARNING
Troubleshooting
Risk of the cruise control system starting uninten-
Cruise control system faulty
tionally!
illuminates
▶ Deactivate cruise control after use.
› Seek the help of a specialist garage.
Status display in the instrument cluster display
illuminated - the cruise control system is acti-
vated
Adaptive Cruise Control (ACC)
illuminated - cruise control is active
When cruise control starts, the set speed is
Functionality
displayed.
ACC control
ACC maintains the set speed. When your vehicle ap-
Operating conditions
proaches the vehicle in front, ACC will automatically
start to maintain the set distance to this vehicle.
✓ The driving speed is higher than 20 km/h.
Maintaining the set speed and the distance will here-
inafter be referred to as Control.
Operation
WARNING
ACC does not respond to crossing or oncoming ob-
Operating with the lever
jects.
ACC is intended primarily for use on motorways.
pACC (predictive cruise control)
pACC represents an extension of the ACC system.
pACC adjusts the speed according to recognized
speed limits and the route, e.g. curves, intersections
or roundabouts.
The system uses the following sources to evaluate
the situation:
▶ Navigation data
A
Activate cruise control (cruise control deacti-
▶ Traffi Sign Recognition
vated)
▶ Sensors, radars and cameras
Deactivate cruise control
WARNING
Interrupt control (sprung position)
pACC does not respond to railway crossings.
B
Resume cruise control1)/Increase speed
Speed range
C
Start control with current speed/Reduce
Depending on the equipment, ACC allows a speed
limit
setting in the range of 30-160 or 30-210 km/h.
D
Show menu of assist systems - Possibility of
If control is started at a speed of less than 30 km/h
switching between cruise control and speed lim-
on vehicles with an automatic transmission, the
iter
speed is automatically increased to 30 km/h or con-
trolled according to the speed of the vehicle ahead.
Accelerate temporarily
› Depress the accelerator pedal.
Distance level
Releasing the accelerator pedal will cause the speed
The distance to the vehicle ahead can be adjusted to
to drop again to the set speed.
five differeÄt levels.
WARNING
Interrupting cruise control
▶ Maintain a minimum distance in accordance with
▶ After pressing the brake pedal
the ouÄtrû-speifi legal regulations.
▶ After an ESC intervention
Automatic stop and start with automatic gearbox
A vehicle with an automatic transmission can be de-
celerated to a stop using the ACC and start moving
1)
If no speed is set, the current speed is adopted.
180 Driver assist systems › Adaptive Cruise Control (ACC)
again. Control is disconnected in case of longer hold-
Activate ACC (control inactive)
ing periods.
Start or resume control/Increase speed in
To resume the regulation:
steps of 1 km/h (sprung position)
› Depress the accelerator pedal.
Stop control (sprung position)
Or:
Deactivate ACC
› Set the lever in position
Increase speed in steps of 10 km/h
Or:
Reduce speed in steps of 10 km/h
› Applies to vehicles with hand recognition on the
Set distance level
steering wheel: Grab the steering wheel again.
Start control/Reduce speed in steps of 1
The control is interrupted when the brake pedal is
km/h
depressed.
Starting control with the current speed
Overtaking
› Tap on
If your vehicle changes to the fast lane and no vehi-
Or:
cle is detected in front, ACC accelerates up to the
set speed.
› If no speed is saved, move the lever to the sprung
position
Status display in the instrument cluster display
illuminates - ACC is activated
Set distance level
› Move the
switch to the sprung position
illuminates - Control is active
or
Line A appears in the
When the control starts, the set speed is displayed.
display, indicating the
illuminates - ACC does not decelerate suffi-
change in distance.
ieÄtlû
› Use the
switch
› Depress the brake pedal.
to set the desired dis-
tance level.
illuminates - ACC controls the driving speed ac-
cording to the permissible speed
illuminates - ACC controls the driving speed ac-
cording to the approaching roundabout
For temporary acceleration
illuminates - ACC controls the driving speed ac-
› Depress the accelerator pedal.
cording to the approaching junction
The vehicle accelerates and control is temporarily in-
illuminates - ACC controls the driving speed ac-
terrupted. Upon releasing the accelerator, control is
cording to the road
resumed.
Interrupting cruise control
Operation
▶ After pressing the brake pedal
▶ By operating the clutch pedal for a long time
Operating with the lever
▶ After an ESC intervention
▶ After deactivation of the ASR
Resuming control
› If a speed is stored, move the lever to the sprung
position
The vehicle is controlled at the set speed. The set
speed is shown in the instrument cluster display.
Function restriction
Do not use the ACC in the following cases:
▶ The vehicle is making a sharp turn.
▶ The vehicle is travelling on a sloping road or in ruts.
Driver assist systems › Adaptive Cruise Control (ACC) 181
▶
When the driving lane is too narrow.
Stationary vehicle
▶ The vehicle drives through a construction site.
WARNING
▶ Be particularly attentive and alert in the following
situations.
Regulation according to the vehicle in the adjacent
lane
If your vehicle is moving faster than the vehicle in
the next lane on the driver's side, at a speed of more
than 80 km/h, this may cause your vehicle to be con-
trolled according to that vehicle.
If a vehicle in front turns and there is a stationary ve-
When cornering
hicle in front of this vehicle, the ACC must not re-
spond to the stationary vehicle.
Vehicles with special load or special bodies
A load or superstructure that protrudes outside the
vehicle might not be detected by the ACC.
Settings
Activation / deactivation and setting
In the Infotainment system, in the menu
When cornering, a vehicle in the next lane may enter
◼
the detected area. Your vehicle will be controlled ac-
cording to this vehicle.
▶ Driving programme:
- Setting the vehicle acceleration
Narrow or staggered vehicle
when the ACC is switched on (this setting is
made for vehicles with driving mode selec-
tion » page 169)
▶ Last distance selected - Switch oÄ/off the last distance
selected
▶ Distance: - Setting the distance to vehicles in front
▶ Road layout preview - Switch the cruise control oÄ/off
according to the road profile (e.g. reduce speed
before a bend)
▶ Speed limit preview - Switch the speed control oÄ/off
according to the permissible speed
ACC detects a narrow or staggered vehicle only
when it is in the area covered by the radar.
Troubleshooting
Lane change by another vehicle
ACC not available
illuminates together with
or
illuminates together with
› Stop the engine and start again.
› If ACC is still unavailable, check the brake lights on
the vehicle or on the attached trailer.
› If the brake lights are working and ACC is still un-
A vehicle that changes to the lane a short distance
available, seek the help of a specialist garage.
away may not be recognized by the ACC in time.
182 Driver assist systems › Lane Assist
Lane Assist
✓ The lane markings are clearly visible.
Usage
Function restriction
Lane Assist helps to keep the vehicle within the lane.
It is based on the boundaries of a lane. These may in-
The system function may be restricted in the follow-
clude lane markings, road edges or objects such as
ing cases:
curbs or possibly traffi cones.
▶ The field of view of the sensor is limited by a dirty
The system is intended primarily for use on high-
screen or an obstacle or a preceding vehicle.
ways.
▶ If the weather conditions are unfavourable.
▶ The vehicle is making a sharp turn.
▶ The vehicle is travelling on a sloping road or in ruts.
Functionality
▶ When the driving lane is too narrow.
As the vehicle approaches a lane marking, the sys-
▶ The vehicle drives through a construction site.
tem executes a steering movement in the opposite
WARNING
direction from the lane marking. The steering inter-
vention can be overridden manually.
Danger of incorrect steering intervention!
Certain objects or markings on the road may be erro-
No system intervention occurs when changing lane
neously recognized as lane markings.
with the turn signal on.
▶ Always keep your hands on the steering wheel and
Status display in the instrument cluster display
be prepared to override the steering intervention.
lights up - System is activated and ready to
intervene
Settings
lights up - System is activated and ready to
intervene
Activation/deactivation in the instrument cluster
lights up - System intervenes
› Press the button on the multifunction steering
wheel.
lights up - System intervenes
› Select Lane Assist .
Activation/deactivation in Infotainment
Display
In the menu
Display example in black and white display.
Lane boundary highligh-
Troubleshooting
ted on the right: system
intervenes on the right
Message regarding system unavailability
when approaching the
› Clean the windscreen in the sensor area.
lane marking.
› Stop the engine and restart again after a short
In the coloured display,
time.
the lines are highlighted
› If the system is still not available, seek the help of a
in colour.
specialist garage.
Warning through steering wheel vibrations
Travel Assist
The steering wheel vibrations are triggered in the
Usage
following situations:
▶ The vehicle crosses the boundary line without the
Travel Assist helps to keep the vehicle within the
indicator light switched on.
lane while controlling the speed of the vehicle.
▶ The system is not able to keep the vehicle within
the lane.
Functionality
› Correct the steering movement in the event of vi-
brations.
Travel Assist uses the functions Lane Assist and
ACC.
Operating conditions
✓ The driving speed is higher than 60 km/h.
Driver assist systems › Lane change assist system Side Assist 183
WARNING
Settings
Risk of an accident!
Activation
▶ Always keep your hands on the steering wheel and
be ready to take over the steering.
› Press the
button on the multifunction steering
wheel.
▶ The notes in the functional description of Lane As-
sist and ACC are to be taken into account.
Regulation with the current speed and adaptive lane
assist are started.
Adaptive lane assist
This function keeps the driver within the selected
Activation when vehicle is stationary with auto-
position within the lane.
matic gearbox
Activation of the function takes place in one of the
Status display in the instrument cluster display
following ways.
is lit up - the system is activated, cruise con-
trol and adaptive lane guidance are active
› Set the ACC lever in position
› Press the
button on the multifunction steering
is lit up - the system is activated, cruise con-
wheel.
trol is active
Or:
is lit up - the system is activated, adaptive
lane guidance is active
› Press the button
on the ACC lever.
lights up - you have let go of the steering
› Press the
button on the multifunction steering
wheel, take over steering
wheel.
lights up - you have released the steering
Regulation with the current speed and adaptive lane
wheel, take over steering immediately
assist are started.
Deactivation
› Depress the brake pedal.
Operating conditions
Or:
✓ The ACC is activated.
› Set the ACC lever in position
» page 180.
✓ The vehicle speed is max. 210 km/h.
✓ The lane markings are clearly visible.
Additional settings are identical to ACC and Lane
Assist.
✓ In vehicles with manual gearbox, the vehicle
speed is higher than 30 km/h.
Troubleshooting
Function restriction
Message regarding system unavailability
› Follow the troubleshooting instructions in case of
Travel Assist is only for support and does not absolve
Lane Assist » page 182 and ACC » page 181.
you from your responsibility for driving the vehicle.
›
If the system is still not available, seek the help of a
The function may be restricted or unavailable in the
specialist garage.
following cases:
▶ The field of view of the sensor is limited by a dirty
screen or an obstacle or a preceding vehicle.
Lane change assist system Side Assist
▶ If the weather conditions are unfavourable.
Usage
▶ The vehicle is making a sharp turn.
▶ The vehicle is travelling on a sloping road or in ruts.
The system uses optical signals in the exterior mirror
to alert the driver to vehicles that could be danger-
▶ When the driving lane is too narrow.
ous when changing lanes.
In addition to these restrictions, also note the ACC
restrictions » page 180.
WARNING
Functionality
Danger of incorrect steering intervention!
The system monitors the area both beside and be-
Certain objects or markings on the road may be erro-
hind the vehicle.
neously recognized as lane markings.
▶ Always keep your hands on the steering wheel and
The system warns of an approaching vehicle through
be prepared to override the steering intervention.
the indicator light in the exterior mirror cover on
the vehicle side, where the vehicle is recognized.
184 Driver assist systems › Traffi sign recognition
Driving situations in which a system warning oc-
▶ A very fast approaching vehicle.
curs
▶ The vehicle is driving through a sharp bend or a
roundabout.
Settings
In the instrument cluster display
In the menu Assist systems.
In Infotainment
In the menu
Your vehicle is being overtaken by vehicle A . The
Troubleshooting
faster vehicle A approaches, the sooner the warning
is given by the indicator light.
Message regarding system unavailability
›
Stop the engine and start again.
Vehicle B is overtaken by your vehicle at a speed
› If the system is still not available, seek the help of a
that is faster by max. 10 km/h. If the speed is higher
specialist garage.
during the overtaking process, no warning will be
provided by the indicator light.
Indicator light
Traffic sign recognition
illuminates - There is another vehicle behind your
Usage
vehicle
ĔashiÄg - There is another vehicle behind your ve-
The road sign recognition shows road signs in the
hicle, and the turn signal on the same side is switch-
display of the instrument cluster. This also indicates
ed on
exceeding the speed limit.
For vehicles with Lane Assist, the indicator light will
WARNING
also Ĕash if your vehicle crosses the lane markings in
Road signs on the road always have priority over the
the direction of the approaching vehicle. The system
road signs shown on the display.
will trigger a steering wheel vibration in this case.
For this, Lane Assist must be activated and the lane
Functionality
marking between the vehicles must be detected.
Displayed road signs
▶ Speed limits
Operating conditions
▶ Overtaking prohibited
✓ The driving speed is higher than 15 km/h.
▶ Driving bans - one-way traffi
✓ No accessories are connected to the trailer sock-
▶ Additional characters, e.g. speed limit in wet condi-
et.
tions
Towing a trailer
If a trailer or other accessory is connected to the
Function restriction
trailer socket, trailer-relevant road signs are also dis-
The system cannot detect lane width. For this rea-
played.
son, it may, for example, draw attention to a vehicle
Driving on roads without speed limits
in a distant lane in the following cases:
If you are on a road with no speed limits, the road
▶ The vehicle is driving on a road with narrow lanes
signs will appear in the display.
or on the lane edge.
Example of road sign display
▶ The vehicle is taking a turn.
The system can draw attention to objects along the
road, such as high guard rails or noise barriers.
In the following cases, the system does not have to
issue a warning of a vehicle, or the warning may be
issued incorrectly:
▶ If the weather conditions are unfavourable.
Driver assist systems › Crew Protect Assist proactive occupant protection 185
Example of additional characters
Crew Protect Assist proactive occupant
Example of several simultaneously rec-
protection
ognised road signs.
Usage
The system of proactive occupant protection trig-
gers measures to protect vehicle occupants in dan-
At the same time, a red display regarding the
speed limit appears in the speedometer.
gerous situations.
Speed units
The speed indications in the road signs shown refer
Functionality
to the speed units that are common in the country.
If the system evaluates the situation as critical, it
For example, the display may refer to 30 km/h or
triggers the following safety measures:
30 mph depending on the country.
▶ Open windows are closed except for a small gap.
▶ The sliding/tilting roof is closed.
Restriction
▶ The front seat belts are tightened on the body.
The system function may be restricted in the follow-
The system response depends on the selected
ing cases:
driving mode.
▶ The sensor is blinded by the sun or oncoming traf-
Risk of frontal impact
fi.
Applies to vehicles with the Front Assist system.
▶ The field of view of the sensor is limited by an ob-
The system triggers safety measures when it de-
stacle or a preceding vehicle.
tects the impending danger of a frontal impact.
▶ If the weather conditions are unfavourable.
Driver inactivity hazard
▶ The vehicle is moving at high speed.
Applies to vehicles with assist systems for emergen-
▶ The road signs are hidden, damaged, or are non-
cy situations.
standard.
The system triggers safety measures when it de-
▶ The road signs are attached to ĔashiÄ£ neon signs.
tects the impending danger if the driver is inactive.
▶ The navigation map documents are not up-to-date
or not available.
Function restriction
Settings
The function may be restricted or unavailable in the
following cases:
Activation / deactivation and setting
In the Infotainment system, in the menu
▶ When deactivated in the infotainment in the menu
▶ When deactivating the ASR or activating the ESC
◼ Traffic Sign Recognition
Sport
▶ Show in instrument cluster - Activation/deactivation of
▶ When reversing
the additional road signs in the display of the in-
▶ If there is a malfunction in the ESC, reversible seat
strument cluster
belt or airbag system
▶ Speed warning: - oÄfi£ures a warning when the
▶ If there is a malfunction or limitation of the Front
speed limit is exceeded
Assist system
▶Warning at over - Increases the speed limit for the
▶ If there is a malfunction or restriction of the Emer-
warning when exceeding the permitted speed
gency Assist assist systems
◼ Trailer detection
▶ Show road signs relevant to trailers Activation/deactivation
of the display of road signs relevant to trailers
Settings
▶ Use for route calculation - Activation/deactivation taking
Automatic activation
trailers in account for route calculation in naviga-
The system is automatically activated when the igni-
tion
tion is switched on.
▶ Tap on maximum speed for trailers - Setting the speed limits
for trailer operation
186 Driver assist systems › Driver Alert fatigue detection assistant
Troubleshooting
Functionality
Crew Protect Assist faulty
When the assist system detects inactivity on the
illuminates together with
part of the driver
Message concerning unavailability or function-
▶ An acoustic warning signal sounds and a message
al restriction
appears in the instrument cluster display.
▶ If, after repeated warnings, the driver does not
› Seek the help of a specialist garage.
take over the steering, the hazard warning lights
are switched on and the vehicle automatically
brakes.
Driver Alert fatigue detection assistant
▶ After the vehicle has come to a standstill, the park-
Functionality
ing brake is switched on.
Interruption of automatic braking
Driver Alert evaluates the steering behaviour. If it de-
▶ By pressing the brake or accelerator pedal
tects fatigue in the driver, a break is recommended.
In the display of the instrument cluster, the following
▶ By actively steering
symbol lights up from the isolation box.
WARNING
Operating conditions
There will be no system warning during the so-called
micro-sleep.
✓ Lane Assist is activated and the boundary lines of
the traffi lane are recognised.
Resetting the break recommendation
✓ ACC is enabled.
The break recommendation is reset in the following
cases:
▶ The vehicle stops and the ignition is switched off
Hill descent assistant
▶ The vehicle stops, the seat belt is removed and the
driver's door is opened
Functionality
▶ The vehicle stops for more than 15 minutes
The Hill Hold Control helps to maintain a constant
In some situations, the system may erroneously
speed when driving downhill through automatic
issue a break recommendation.
brake interventions.
The system also works when driving in neutral or
when reverse gear is engaged.
Operating conditions
WARNING
✓ Driving speed between 60-200 km/h.
Risk of an accident!
The system cannot properly fulfil its function on slu-
shy soil for physical reasons, e.g. ice or mud.
Settings
Status display in the instrument cluster display
Activation/deactivation
lit up in grey - the system is activated
In the Infotainment system, in the menu
lit up white / green - the system intervenes
Change speed
The driving speed can be changed by pressing the
Emergency situation assist
brake or accelerator pedal. After releasing the pedal,
the assist system maintains the current speed.
systemEmergency Assist
Usage
Operating conditions
The assist systems for emergencies detect inactivity
of the driver, which, for example, can be caused by a
✓ The engine is running.
sudden loss of consciousness. The system then per-
✓ Offroad is activated.
forms measures as safely as possible to decelerate
✓ The slope is at least 10 %.
the vehicle to a stop.
✓ Neither the accelerator nor the brake pedal is
The assist systems are only available for vehicles
pressed.
with an automatic gearbox.
✓ The vehicle speed is max. 30 km/h.
Park Assist systems › Park Pilot parking aid 187
Settings
Park Assist systems
Automatic activation
Park Pilot parking aid
The system will be automatically activated when you
turn on Offroad mode.
Functionality
Activation/deactivation in Infotainment
If an obstacle is detected, the Infotainment will dis-
The system is activated or deactivated in the follow-
play a visible message and an audible signal will
ing menu.
sound.
The interval between the signals becomes shorter as
Or:
the clearance is reduced. At a distance of less than
30 cm from the obstacle, a continuous tone sounds.
If the driver does not respond to the warning, the
system triggers automatic emergency braking at
speeds below 8 km/h in order to reduce the impact.
Automatic braking can be activated and deactivated
in the infotainment.
Display
The recorded areas vary according to the equipment.
A
Route controlled at the current steering angle
Acoustic signals oÄ/off
One-time deactivation/activation of automatic
braking
Change to the rear view camera display
System fault
Obstacle at a distance of less than 30 cm
Obstacle at a distance of more than 30 cm
Obstacle outside the route
Operating conditions
✓ The driving speed is lower than 15 km/h.
✓ No accessories are connected to the trailer sock-
et.
Turn on/turn off
Switching on
› Engage reverse gear.
Or:
188 Park Assist systems › Rear view camera
› Press the button.
Rear view camera
Automatic switch-on during forward travel
Functionality
When approaching an obstacle at a speed of less
than 10 km/h.
When reversing, the area behind the vehicle is dis-
played in the Infotainment screen complete with ori-
Automatic switch-on does not activate automatic
entation lines.
braking.
The camera is equipped with a cleaning system.
Switching off
Cleaning takes place automatically together with the
› Disengage reverse gear.
washing of the rear window or with the aid of the
Or:
functional surface in the Infotainment screen.
› Press the button.
Automatic switch off
Orientation lines and functional surfaces
The driving speed is higher than 15 km/h.
Orientation lines
Function restriction
In the following cases, the system does not have to
issue a warning of an obstacle, or the warning may
be issued incorrectly:
▶ If the weather conditions are unfavourable.
▶ The detected obstacles are moving.
▶ Sensor signals are not reĔeted by the surface of
the obstacles.
▶ It is a small obstacle, e.g. a stone or a pillar.
A
Distance about 40 cm
B
Distance about 100 cm
Settings
C
Distance about 200 cm
D
The lines indicate the track, which is controlled
The system settings are made in the infotainment
at the current steering angle. The distance be-
system in the following menu:
tween the side lines corresponds approximately
to the vehicle width including mirrors.
Or:
Function surfaces
Troubleshooting
After switching on, an audible signal sounds for 3
seconds and there is no obstacle near the vehicle
› Seek the help of a specialist garage.
After switching on, the symbol Ĕashes in the
button
› Seek the help of a specialist garage.
A
Mode for transverse parking
After switching on, not all scanned areas are dis-
B
Mode for parallel parking
played on the Infotainment screen
C
Mode for driving up to a trailer/distance moni-
› Move the vehicle a few meters forwards or back-
toring
wards.
D
Mode for monitoring the area behind the vehicle
› If the scanned areas are still not displayed, seek the
(wide view)
help of a specialist garage.
E
Brightness, contrast and colour settings of the
screen
F
Cleaning the rear view camera
G
Parking Aid View
Park Assist systems › Rear view camera 189
Switch the view on / off
› Hold the steering
wheel in the adjusted
Full Screen
position and reverse.
Switch audible parking signals oÄ/off
› Stop the vehicle if the
green line overlaps
with the lateral boun-
Operating conditions
dary of the parking
✓ Ignition on
space (e.g. the curb) or
if
is displayed.
✓ Driving speed less than 15 km/h
›
Countersteer until the
yellow lane line crosses
Operation
the red line for the required lane orientation.
› Hold the steering wheel in the adjusted position
Switch on the system
and reverse.
› Engage reverse gear.
› Stop the vehicle at a safe distance from the obsta-
Or:
cle or when is displayed.
› Press the button.
Mode for driving up to a trailer/distance monitor-
When switching on, an alarm sounds and the symbol
ing
lights up in the button
from the isolation box.
The screen shows the area behind the vehicle in plan
view.
Mode for transverse parking
On vehicles with a factory fitted tow-bar, this mode
› Stop the vehicle in
assists the driver when the vehicle is approaching a
front of a suitable
trailer draw bar. A line for approaching the trailer
parking space.
draw bar and lines for estimating distance are dis-
› Reverse so that the
played on the screen.
yellow lines lead into
For vehicles without a factory fitted tow bar, a line
the parking space.
for monitoring the distance to obstacles is displayed
› At the latest, stop
on the screen at a distance of 40 cm behind the vehi-
when the red line
cle.
touches the rear boun-
dary (e.g. curb).
Mode for monitoring behind the vehicle
The area behind the vehicle is displayed on the
Mode for parallel parking
screen.
› In the screen, select the mode for parallel parking.
› Turn on the indicator light for the side on which
Switch off the system
you want to park.
› Press the button.
› Stop the vehicle stop
Or:
so that there are no
› For vehicles with an automatic gearbox, put the se-
obstructions in the gap
lector lever in the position.
between the auxiliary
boxes A and the rear
Automatic shut-off
The automatic system shut-off occurs when driving
box does not extend
forward at a speed over 15 km/h.
over the side of the
parking space (e.g.
kerb).
Restriction
› Turn the steering
wheel in the recom-
The camera image is distorted in contrast to the nak-
mended direction B until the red colour of the tra-
ed eye. The display may only be used to estimate the
pezoidal border C turns green.
distance.
Some items may not be displayed properly on the
screen. These include narrow columns, wire mesh
fences, grids or road bumps.
190 Park Assist systems › Area View environment overview
Area View environment overview
Front camera view
Usage
The area view assists the driver in parking and ma-
noeuvring by displaying the vehicle area.
Overview
General overview
A
Mode for transverse parking
The orientation lines are used for estimating dis-
tance as well as for displaying the route, which is
controlled at the current steering angle.
B
Mode for monitoring the area in front of the ve-
hicle (wide view)
The area right in front of the vehicle is marked
by the blue lines.
A
3D views:
C
Distance monitoring mode
Top view
Side camera view
View obliquely from above
View from the side
Overall view
By moving your fiģer across the screen, you can
change the viewing angle.
Camera rear view
A
Left side
B
Right side
C
Left and right side
The yellow line is shown at a distance of about
40 cm from the vehicle.
A
Mode for transverse parking
Operating conditions
B
Mode for parallel parking
C
Mode for driving up to a trailer/distance moni-
✓ The ignition is switched on.
toring
✓ The driving speed is lower than 15 km/h.
D
Mode for monitoring the area behind the vehicle
(wide view)
Operation
Switching on
› Engage reverse gear.
Or:
› Press the button.
Selecting the camera image
The respective camera image is selected by touching
the screen in the Infotainment in the area next to, in
front of or behind the vehicle silhouette. The selec-
Park Assist systems › Rear Traffi Alert
191
ted area is highlighted on the screen by a yellow bor-
der.
Switching off
› Press the button.
Or:
› For vehicles with an automatic gearbox, put the se-
lector lever in the position.
Automatic shut-off
The automatic system shut-off occurs when driving
Vehicle in collision area - danger of collision!
forward at a speed over 15 km/h.
Approaching vehicle
Vehicle without Parking Aid
Restriction
If an approaching vehicle is detected in the area be-
hind your vehicle, the a warning is displayed in the in-
The camera image is distorted in contrast to the nak-
strument cluster display, indicating to the driver to
ed eye. The display may only be used to estimate the
monitor the traffi behind. At the same time, an
distance.
acoustic signal sounds.
Some items, such as thin posts, chain link fences,
grilles or uneven road surfaces may not be properly
displayed.
Operating conditions
Objects directly beside the corners of the vehicle
✓ No accessories are connected to the trailer sock-
may be outside the field of view of the cameras and
et.
may therefore not be displayed on the screen.
Function restriction
Troubleshooting
Manoeuvre Assist’s functionality may be limited in
After switching on, the symbol Ĕashes in the
unfavourable weather conditions.
button
› Seek the help of a specialist garage.
Settings
Rear Traffic Alert
Activation/deactivation in the instrument cluster
display
Functionality
In the menu Assist systems.
When reversing, the
Activation/deactivation in Infotainment
Rear Traffi Alert warns
In the following menu:
of approaching vehicles.
If the driver does not re-
Or:
spond to the warning,
the vehicle is braked au-
tomatically at a speed
below 10 km/h.
Troubleshooting
Message regarding system unavailability
Vehicle with Parking Aid
› Stop the engine and start again.
If an approaching vehicle is detected in the area be-
› If the system is still not available, seek the help of a
hind your vehicle, a graphical warning is displayed in
specialist garage.
the Infotainment. At the same time, a continuous
tone sounds.
192 Park Assist systems › Park steering assistant
Park steering assistant
Usage
Park Assist helps drivers park in parallel and perpen-
dicular parking places and to manoeuvre out of par-
allel parking spaces.
Functionality
The system looks for a parking space and only takes
Park backwards longitudinally
over the steering during the parking procedure or
when leaving a parking place. The driver operates the
Park backwards crosswise
pedals and the shift lever/gear selector.
Park forwards across
The system displays information and notes on the in-
The parking mode can be changed by pressing the
strument cluster display.
button
If the system detects a risk of collision, automatic
Press the button again
and the system is switch-
emergency braking takes place to prevent a collision.
ed off.
› To return to the original recommended parking
Operating conditions
mode, press the button again.
✓ The driving speed is lower than 7 km/h.
Before the parking process
✓ The ASR is activated and there is no intervention.
› If a suitable parking space is found, stop and drive
backwards or forwards as indicated by the arrow in
✓ There is no driver intervention in the automatic
the display.
steering operation.
✓ No accessories are connected to the trailer sock-
› When a steering intervention message is displayed,
release the steering wheel. The steering operation
et.
is taken over by the system.
Parking operation
Operation
CAUTION
Turn on/turn off
Risk of injury!
› Press the
button.
▶ Do not reach between the steering wheel spokes
during the parking manoeuvre.
When the system is switched on, the symbol lights
up in the button
▶ Only operate the pedals and the shift / selector
lever.
Select the lane side for the parking procedure
The system automatically searches for a suitable
› Observe the area around the vehicle and drive
backwards or forwards in accordance with the ar-
parking space on the passenger side.
row in the display.
› Press the driver's side indicator to fiÄd a parking
› As soon as the symbol appears in the display
space on this side of the road.
and an audible signal sounds, stop the vehicle. The
Operation while searching for a parking space
steering wheel is taken over accordingly. The sym-
› Drive past a number of parked vehicles at a dis-
bol
goes out.
tance of 0.5-1.5 m.
› Travel backwards or forwards in accordance with
› To search for a parking space across the road, drive
the arrow in the display.
slower than 20 km/h.
As soon as the parking process is completed, the
› To search for a parking space along the road, drive
corresponding message is displayed and an audible
slower than 40 km/h.
signal sounds.
If the symbol
(km/h) appears in the display, reduce
The parking procedure can be ended at any time by
the driving speed. If the system fiÄds a parking
pressing the button
space, the display will show the recommended park-
When partially parked in a suitable transverse
ing mode.
parking space forward, press button . The parking
Changing the parking mode
process is completed by the system.
If a suitable parking space is found, the following
Park modes can be shown in the display.
Park Assist systems › Trailer assist trailer manoeuvring aid
193
Exiting a parking space
▶ If snow chains or a spare wheel are mounted on
› Press the
button.
the vehicle.
When the system is switched on, the symbol lights
NOTICE
up in the button
The system does not warn of obstacles or monitors
› Follow the instructions on the screen.
the area behind the trailer. The driver must check
themselves as to whether there are no obstacles in
Automatic speed reduction
the area behind the trailer.
If a speed of 7 km/h is exceeded during the parking
process, the system will reduce the speed.
Upon the speed being exceeded by 7 km/h a second
Functionality
time, the parking process is terminated.
The rear camera monitors the bending angle of the
trailer drawbar. The system executes appropriate
Function restriction
steering movements to position the trailer in the de-
sired direction. The driver operates the pedals and
If the parking space is too small, it is not possible to
the shift lever/gear selector.
use the Park Assist to initiate a parking manoeuvre.
The driver sets the desired direction with the exter-
A message is shown on the instrument cluster dis-
nal mirror knob.
play.
Do not use the Park Assist in the following cases:
Operating conditions
▶ The vehicle is moving on unpaved or slippery surfa-
ces.
✓ The driving speed is lower than 5 km/h.
▶ If snow chains or a spare wheel are mounted on
✓ The ASR is activated and there is no intervention.
the vehicle.
✓ The luggage compartment lid is closed.
▶ If the system chooses an inappropriate parking
✓ The driver's door is closed.
space for parking.
✓ It is a uniaxial or biaxial trailer hitched without a
steered axle.
✓ The trailer drawbar is not covered.
Troubleshooting
✓ The trailer is not veering too much.
Message regarding system unavailability
› Stop the engine and start again.
› If the system is still not available, seek the help of a
Operation
specialist garage.
Before switching on
Incorrect resulting position of the vehicle in the
› Make several turns or cornering with the trailer at-
parking space
tached.
The correct parking procedure depends on the size
The system determines the drawbar length in order
of the wheels. If other wheels approved by ŠKODA
to use the maximum yaw rate.
AUTO are fitted, have the system readjusted by a
specialist garage.
Switch on the system
› Stop the vehicle.
› Engage reverse gear.
Trailer assist trailer manoeuvring aid
› Release the steering wheel and press the
but-
ton.
Usage
Manoeuvring
The trailer manoeuvring aid helps the driver when re-
versing with a trailer.
› Tilt the exterior mirror
knob to the right or
left.
What you should be mindful of
The setting menu is
shown on the instrument
Use the system extremely carefully in the following
cluster display.
cases:
▶ The vehicle is moving on unpaved or slippery surfa-
ces.
194 Engine, exhaust system and fuel › Bonnet
A
Current trailer posi-
Engine, exhaust system and fuel
tion
B
Target trailer posi-
Bonnet
tion
Opening the bonnet
C
Manoeuvring angular
dimension
Before opening
› Make sure the windscreen wiper arms are folded
› Tilt the knob to the
right or left to set the
down onto the windscreen.
trailer's target position.
› Keep everyone away from the engine compart-
ment.
› Start reversing.
The setting can be corrected when reversing.
Opening
› Stop as soon as the trailer's target position is
› Pull the release lever
reached.
underneath the dash
panel.
CAUTION
Risk of injury!
▶ Do not reach between the steering wheel spokes
during the parking manoeuvre.
▶ Only operate the pedals and the shift / selector
lever.
Straighten the trailer
› Tilt the knob backwards.
› Release the lock.
› Carefully reverse and drive forwards until the de-
› Lift the bonnet so that
sired position of the trailer combination is ach-
the gas pressure
ieved.
springs hold it open.
Switch off the system
› Press the
button.
Automatic system shut-off
If the following situations occur during the manoeu-
vring process, an automatic system shutdown and a
braking intervention take place.
Closing
▶ The button is pressed.
› Pull the Ĕap down.
▶ The driver's door is opened.
› Close the Ĕap with a slight push from a distance of
▶ The steering wheel is gripped.
about 20 cm.
▶ The driving speed is too high.
› Check that the bonnet is closed.
▶ The trailer veered too much.
NOTICE
▶ Do not press down on an unclosed bonnet.
▶ Open and close the Ĕap again.
Engine oil
Checking the fill level and topping up
Test conditions
✓ The vehicle is on a horizontal surface
✓ The parked engine is warm
Checking the level
› Wait a few minutes for the engine oil to Ĕoõ back
into the oil sump.
› Remove the dipstick and wipe with a clean cloth.
› Insert the dipstick as far as it will go and pull it out
again.
Engine, exhaust system and fuel › Coolant 195
› Read the oil level and push the dipstick back in
or
again.
Ĕashes, lights up at the same time
› Check the engine oil level.
The oil level is OK, the warning light continues to
Ĕash:
› Stop the engine and seek the help of a specialist
garage.
Engine oil level too low
illuminates together with
The oil level must be within the marked range.
or
NOTICE
illuminates together with
Risk of damage to the engine and the exhaust sys-
Message regarding required engine oil top up
tem!
› Check the engine oil level, top up with oil if re-
▶ The oil level must not be outside the marked range.
quired.
If it is not possible to top up the engine oil or if the
oil level is above the marked range, do not continue
Engine oil level too high
driving. Stop the engine and seek the help of a spe-
illuminates together with
cialist garage.
▶ Do not use any oil additives.
or
Consumption
illuminates together with
Depending on driving style and operating conditions,
Message regarding the need to reduce the
the engine consumes some oil, up to 0.5 l/1000 km.
engine oil level
Consumption may be higher over the next 5000 km.
›
Check the engine oil level.
RefilliÄg
› Unscrew the cover of the engine oil filler opening.
The oil level is too high:
› Top up the oil to the correct speifiatioÄ in 0.5 li-
› Drive on, exercising appropriate caution.
tre portions.
› Seek the help of a specialist garage.
› Check the oil level.
Engine oil level sensor impaired
› Screw on the cover of the engine oil filler opening.
illuminates together with
SpecificatioÄ
Ask a specialist garage for the correct engine oil
or
speifiatioÄ for your vehicle.
illuminates together with
If no oil of the correct speifiatioÄ is available, max.
Message regarding the engine oil sensor
0.5 l of oil with the following speifiatioÄs may be
used until the next oil change:
› Drive on, exercising appropriate caution.
›
Seek the help of a specialist garage.
▶ Petrol engines: VW 504 00, VW 508 00,
ACEA C3, ACEA C5
▶ Diesel engines: VW 507 00, VW 509 00,
Coolant
ACEA C3, API CJ-4
For vehicles without a particulate filter, VW 505 01
Coolant temperature gauge
can be optionally used.
Changing
Have the oil changed by a specialist garage.
Troubleshooting
Engine oil pressure too low
Ĕashes, lights up at the same time
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст