Skoda Enyaq (2021 year). Manual in english — page 9
178 Driver assist systems › Travel Assist
▶
If the weather conditions are unfavourable.
Travel Assist
▶ The vehicle is making a sharp turn.
Usage
▶ The vehicle is travelling on a sloping road or in ruts.
▶ When the driving lane is too narrow.
Travel Assist helps to keep the vehicle within the lane while con-
▶ The vehicle drives through a construction site.
trolling the speed of the vehicle.
WARNING
Danger of incorrect steering intervention!
Functionality
Certain objects or markings on the road may be erroneously rec-
ognized as lane markings.
Travel Assist uses the functions Lane Assist and ACC.
▶ Always keep your hands on the steering wheel and be pre-
WARNING
pared to override the steering intervention.
Risk of an accident!
▶ Always keep your hands on the steering wheel and be ready to
take over the steering.
Settings
▶ The notes in the functional description of Lane Assist and ACC
Automatic activation
are to be taken into account.
Lane Assist is always automatically activated when the ignition
Adaptive lane assist
is switched on.
This function keeps the driver within the selected position with-
Activation/deactivation in Infotainment
in the lane.
In the menu
Status display in the instrument cluster display
is lit up - the system is activated, cruise control and
adaptive lane guidance are active
Troubleshooting
is lit up - the system is activated, cruise control is active
Message regarding system unavailability
› Clean the windscreen in the sensor area.
is lit up - the system is activated, adaptive lane guidance
› Switch the ignition o and on again after a short time.
is active
› If the system is still not available, seek the help of a specialist
lights up - you have let go of the steering wheel, take over
garage.
steering
lights up - you have released the steering wheel, take over
steering immediately
Driver assist systems › Lane change assist system Side Assist
179
Operating conditions
Settings
✓ The ACC is activated.
Activation
✓ The vehicle speed is max. 210 km/h.
› Press the
button on the multifunction steering wheel.
✓ The lane markings are clearly visible.
Regulation with the current speed and adaptive lane assist are
started.
Deactivation
Function restriction
›
Depress the brake pedal.
Travel Assist is only for support and does not absolve you from
Or:
your responsibility for driving the vehicle.
›
Set the ACC lever in position
» page 174.
The function may be restricted or unavailable in the following
cases:
Additional settings are identical to ACC and Lane Assist.
▶ The field of view of the sensor is limited by a dirty screen or an
obstacle or a preceding vehicle.
Troubleshooting
▶ If the weather conditions are unfavourable.
Message regarding system unavailability
▶ The vehicle is making a sharp turn.
›
Follow the troubleshooting instructions in case of Lane As-
▶ The vehicle is travelling on a sloping road or in ruts.
sist » page 178 and ACC » page 176.
▶ When the driving lane is too narrow.
› If the system is still not available, seek the help of a specialist
In addition to these restrictions, also note the ACC restric-
garage.
tions » page 175.
WARNING
Danger of incorrect steering intervention!
Lane change assist system Side Assist
Certain objects or markings on the road may be erroneously rec-
Usage
ognized as lane markings.
▶ Always keep your hands on the steering wheel and be pre-
The system uses optical signals in the exterior mirror to alert the
pared to override the steering intervention.
driver to vehicles that could be dangerous when changing lanes.
180 Driver assist systems › Lane change assist system Side Assist
Functionality
For vehicles with Lane Assist, the indicator light will also flash if
your vehicle crosses the lane markings in the direction of the ap-
The system monitors the area both beside and behind the vehi-
proaching vehicle. The system will trigger a steering wheel vi-
cle.
bration in this case.
The system warns of an approaching vehicle through the indica-
For this, Lane Assist must be activated and the lane marking be-
tor light in the exterior mirror cover on the vehicle side, where
tween the vehicles must be detected.
the vehicle is recognized.
Driving situations in which a system warning occurs
Operating conditions
✓ The driving speed is higher than 15 km/h.
✓ No accessories are connected to the trailer socket.
Function restriction
The system cannot detect lane width. For this reason, it may, for
example, draw attention to a vehicle in a distant lane in the fol-
lowing cases:
▶ The vehicle is driving on a road with narrow lanes or on the
Your vehicle is being overtaken by vehicle A . The faster vehicle
lane edge.
A approaches, the sooner the warning is given by the indicator
▶ The vehicle is taking a turn.
light.
The system can draw attention to objects along the road, such
Vehicle B is overtaken by your vehicle at a speed that is faster
as high guard rails or noise barriers.
by max. 10 km/h. If the speed is higher during the overtaking
In the following cases, the system does not have to issue a
process, no warning will be provided by the indicator light.
warning of a vehicle, or the warning may be issued incorrectly:
Indicator light
▶ If the weather conditions are unfavourable.
illuminates - There is another vehicle behind your vehicle
▶ A very fast approaching vehicle.
flashing - There is another vehicle behind your vehicle, and
▶ The vehicle is driving through a sharp bend or a roundabout.
the turn signal on the same side is switched on
Driver assist systems › Trac sign recognition
181
Settings
Towing a trailer
If a trailer or other accessory is connected to the trailer socket,
In Infotainment
trailer-relevant road signs are also displayed.
In the menu
Driving on roads without speed limits
If you are on a road with no speed limits, the road signs will
Troubleshooting
appear in the display.
Example of road sign display
Message regarding system unavailability
› Switch the ignition o and on again.
› If the system is still not available, seek the help of a specialist
garage.
Example of additional characters
Traffic sign recognition
Example of several simultaneously recognised road
Usage
signs.
The road sign recognition shows road signs in the display of the
instrument cluster. This also indicates exceeding the speed limit.
WARNING
At the same time, a red display regarding the speed limit ap-
Road signs on the road always have priority over the road signs
pears in the speedometer.
shown on the display.
Speed units
The speed indications in the road signs shown refer to the speed
units that are common in the country.
Functionality
For example, the display may refer to 30 km/h or 30 mph de-
Displayed road signs
pending on the country.
▶ Speed limits
▶ Overtaking prohibited
▶ Driving bans - one-way trac
Restriction
▶ Danger sign
The system function may be restricted in the following cases:
▶ Additional characters, e.g. speed limit in wet conditions
▶ The sensor is blinded by the sun or oncoming trac.
182 Driver assist systems › Crew Protect Assist proactive occupant protection
▶
The field of view of the sensor is limited by an obstacle or a
Crew Protect Assist proactive occupant
preceding vehicle.
protection
▶ If the weather conditions are unfavourable.
▶ The vehicle is moving at high speed.
Usage
▶ The road signs are hidden, damaged, or are non-standard.
The system of proactive occupant protection triggers measures
▶ The road signs are attached to flashing neon signs.
to protect vehicle occupants in dangerous situations.
▶ The navigation map documents are not up-to-date or not
available.
Functionality
Settings
If the system evaluates the situation as critical, it triggers the
following safety measures:
Activation / deactivation and setting
▶ The hazard warning lights are switched on.
In the Infotainment system, in the menu
▶ Open windows are closed except for a small gap.
◼ Tra c Sign Recognition
▶ The sliding/tilting roof is closed.
▶ Show in instrument cluster - Activation/deactivation of the additional
▶ The front seat belts are tightened on the body.
road signs in the display of the instrument cluster
The system response depends on the selected driving mode.
▶ Speed warning: - Configures a warning when the speed limit is ex-
ceeded
Risk of frontal impact
▶Warning at over - Increases the speed limit for the warning when
Applies to vehicles with the Front Assist system.
exceeding the permitted speed
The system triggers safety measures when it detects the im-
◼ Trailer detection
pending danger of a frontal impact.
▶ Show road signs relevant to trailers Activation/deactivation of the dis-
Driver inactivity hazard
play of road signs relevant to trailers
Applies to vehicles with assist systems for emergency situa-
▶ Use for route calculation - Activation/deactivation taking trailers in
tions.
account for route calculation in navigation
The system triggers safety measures when it detects the im-
▶ Tap on maximum speed for trailers - Setting the speed limits for trailer
pending danger if the driver is inactive.
operation
Driver assist systems › Driver Alert fatigue detection assistant
183
Function restriction
Driver Alert fatigue detection assistant
The function may be restricted or unavailable in the following
Functionality
cases:
Driver Alert evaluates the steering behaviour. If it detects fati-
▶ When reversing
gue in the driver, a break is recommended. In the display of the
▶ If there is a malfunction in the ESC, reversible seat belt or air-
instrument cluster, the following symbol lights up from the
bag system
isolation box.
▶ If there is a malfunction or limitation of the Front Assist sys-
WARNING
tem
There will be no system warning during the so-called micro-
▶ If there is a malfunction or restriction of the Emergency Assist
sleep.
assist systems
Resetting the break recommendation
The break recommendation is reset in the following cases:
Settings
▶ The vehicle stops and the ignition is switched o
Automatic activation
▶ The vehicle stops, the seat belt is removed and the driver's
The system is automatically activated when the ignition is
door is opened
switched on.
▶ The vehicle stops for more than 15 minutes
In some situations, the system may erroneously issue a break
recommendation.
Troubleshooting
Crew Protect Assist faulty
illuminates together with
Operating conditions
Message concerning unavailability or functional restriction
✓ Driving speed between 60-200 km/h.
› Seek the help of a specialist garage.
Settings
Activation/deactivation
In the Infotainment system, in the menu
184 Driver assist systems › Emergency situation assist systemEmergency Assist
Emergency situation assist systemEmergency
Settings
Assist
Automatic activation
The Assistant is automatically activated when the ignition is
Usage
switched on.
The assist systems for emergencies detect inactivity of the driv-
Activation/deactivation
er, which, for example, can be caused by a sudden loss of con-
In the Infotainment system, in the menu
sciousness. The system then performs measures as safely as
possible to decelerate the vehicle to a stop.
Automatic recuperation assistant Eco Assist
Functionality
Usage
When the assist system detects inactivity on the part of the
Eco Assist supports an economical driving style with the help of
driver
instructions in the display of the instrument cluster.
▶ An acoustic warning signal sounds and a message appears in
the instrument cluster display.
▶ If, after repeated warnings, the driver does not take over the
Functionality
steering, the hazard warning lights are switched on and the ve-
hicle automatically brakes.
When the system detects that it is possible to drive more eco-
nomically, the following information is shown in the display of
▶ After the vehicle has come to a standstill, the parking brake is
the instrument cluster:
switched on. Depending on the equipment, an emergency call
can be initiated.
▶ Symbol for an approaching event. These include e.g. a speed
limit, a crossing etc.
Interruption of automatic braking
▶
- Recommendation to release the accelerator pedal
▶ By pressing the brake or accelerator pedal
▶ By actively steering
After releasing the accelerator pedal, the vehicle adapts the
driving speed and recuperation to the current situation.
Pressing the rocker switch or on the steering wheel tempo-
Operating conditions
rarily activates the manual selection of the recuperation level.
Automatic recuperation is activated again by pressing the accel-
✓ Assist system for emergency situations is activated.
erator pedal » page 158.
✓ Lane Assist is activated and the boundary lines of the trac
lane are recognised.
The system uses the following sources to evaluate the situation:
Park Assist systems › Park Pilot parking aid 185
▶
Navigation data
Park Assist systems
▶ Trac Sign Recognition
▶ Sensors, radars and cameras
Park Pilot parking aid
Functionality
Function restriction
If an obstacle is detected, the Infotainment will display a visible
The function cannot be used in the following cases:
message and an audible signal will sound.
The interval between the signals becomes shorter as the clear-
▶ If the automatic distance control (ACC) is activated
ance is reduced. At a distance of less than 30 cm from the ob-
▶ If the cruise control system is activated
stacle, a continuous tone sounds.
▶ If Sport driving mode is selected
If the driver does not respond to the warning, the system trig-
gers automatic emergency braking at speeds below 8 km/h in
Settings
order to reduce the impact.
Activation/deactivation
Automatic braking can be activated and deactivated in the info-
tainment.
In the Infotainment system, in the menu
Display
The recorded areas vary according to the equipment.
186 Park Assist systems › Park Pilot parking aid
Acoustic signals on/o
Or:
One-time deactivation/activation of automatic braking
› Press the
button.
Park steering assistant
Automatic switch off
Setting certain park assist systems
The driving speed is higher than 15 km/h.
System fault
Change to the rear view camera display
Function restriction
In the following cases, the system does not have to issue a
Obstacle at a distance of less than 30 cm
warning of an obstacle, or the warning may be issued incorrect-
Obstacle at a distance of more than 30 cm
ly:
Obstacle outside the route
▶ If the weather conditions are unfavourable.
▶ The detected obstacles are moving.
▶ Sensor signals are not reflected by the surface of the obsta-
Operating conditions
cles.
✓ The driving speed is lower than 15 km/h.
▶ It is a small obstacle, e.g. a stone or a pillar.
✓ No accessories are connected to the trailer socket.
Settings
Turn on/turn off
The system settings menu is displayed as follows:
Switching on
› P ress the
button below the Infotainment
and tap the
› Engage reverse gear.
Infotainment screen.
Or:
Or:
› Press the
button.
› Press the
button below the Infotainment
and tap
Automatic switch-on during forward travel
the Infotainment screen.
When approaching an obstacle at a speed of less than 10 km/h.
Or:
Automatic switch-on does not activate automatic braking.
› Engage reverse gear in the infotainment screen tap the func-
tional surface
Switching off
› Disengage reverse gear.
Park Assist systems › Rear view camera 187
Troubleshooting
Orientation lines and functional surfaces
After switching on, an audible signal sounds for 3 seconds
Orientation lines
and there is no obstacle near the vehicle
› Seek the help of a specialist garage.
After switching on, not all scanned areas are displayed on the
Infotainment screen
› Move the vehicle a few meters forwards or backwards.
› If the scanned areas are still not displayed, seek the help of a
specialist garage.
Rear view camera
A
Distance about 40 cm
Functionality
B
Distance about 100 cm
When reversing, the area behind the vehicle is displayed in the
C
Distance about 200 cm
Infotainment screen complete with orientation lines.
D
The lines indicate the track, which is controlled at the cur-
The camera is equipped with a cleaning system. Cleaning
rent steering angle. The distance between the side lines cor-
takes place automatically when the rear window is washed.
responds approximately to the vehicle width including mir-
rors.
Function surfaces
188 Park Assist systems › Rear view camera
A
Mode for transverse parking
Mode for transverse parking
B
Mode for driving up to a trailer
› Stop the vehicle in front of a suita-
ble parking space.
C
Mode for monitoring the area behind the vehicle (wide view)
›
Reverse so that the yellow lines
D
Switching audible parking signals on/o
lead into the parking space.
E
Setting the parking aid
› At the latest, stop when the red
line touches the rear boundary
F
Brightness, contrast and colour settings of the image display
(e.g. curb).
G
Parking Aid View
Operating conditions
Mode for driving up to a trailer
On vehicles with a factory fitted tow-bar, this mode assists the
✓ Ignition on
driver when the vehicle is approaching a trailer draw bar. A line
✓ Driving speed less than 15 km/h
for approaching the trailer draw bar is displayed on the screen.
Mode for monitoring behind the vehicle
Operation
The area behind the vehicle is displayed on the screen.
Switch on the system
Switch off the system
› Engage reverse gear.
› Press the
button under the Infotainment.
Or:
Or:
› Press the
button below the Infotainment
and tap the
› Tap the functional surface on the Infotainment screen.
Infotainment screen.
Automatic shut-off
The automatic system shut-o occurs when driving forward at a
speed over 15 km/h.
Restriction
The camera image is distorted in contrast to the naked eye. The
display may only be used to estimate the distance.
Park Assist systems › Area View, Top View
189
Some items may not be displayed properly on the screen. These
Camera rear view
include narrow columns, wire mesh fences, grids or road bumps.
Area View, Top View
Usage
The area view assists the driver in parking and manoeuvring by
displaying the vehicle area.
Overview
A
Mode for transverse parking
General overview
B
Mode for driving up to a trailer
C
Mode for monitoring the area behind the vehicle (wide view)
D
Switching audible parking signals on/o
E
Setting the parking aid
F
Brightness, contrast and colour settings of the image display
Front camera view
Selecting the camera image
The respective camera image is selected by touching the screen
in the Infotainment in the area next to, in front of or behind the
vehicle silhouette. The selected area is highlighted on the screen
by a yellow border.
A
Mode for transverse parking
190 Park Assist systems › Area View, Top View
B
Mode for monitoring the area in front of the vehicle (wide
Or:
view)
› Press the
button below the Infotainment
and tap the
C
Switching audible parking signals on/o
Infotainment screen.
D
Setting the parking aid
Selecting the camera image
E
Brightness, contrast and colour settings of the image display
› In infotainment, tap the area next to, in front of or behind the
vehicle silhouette. The selected area is highlighted on the
Side camera view
screen by a yellow border.
Switching off
›
Press the
button under the Infotainment.
Or:
› Tap the functional surface on the Infotainment screen.
Automatic shut-off
The automatic system shut-o occurs when driving forward at a
speed over 15 km/h.
Left and right side
Restriction
The yellow line is shown at a distance of about 40 cm from the
The camera image is distorted in contrast to the naked eye. The
vehicle.
display may only be used to estimate the distance.
Some items, such as thin posts, chain link fences, grilles or un-
Operating conditions
even road surfaces may not be properly displayed.
Objects directly beside the corners of the vehicle may be out-
✓ Ignition on
side the field of view of the cameras and may therefore not be
✓ Driving speed less than 15 km/h
displayed on the screen.
Operation
Switching on
› Engage reverse gear.
Park Assist systems › Rear Trac Alert
191
Troubleshooting
Message regarding system unavailability
› Seek the help of a specialist garage.
Rear Traffic Alert
Functionality
When reversing, the Rear Trac
Alert warns of approaching vehicles.
Vehicle in collision area - danger of collision!
If the driver does not respond to the
Approaching vehicle
warning, the vehicle is braked auto-
matically at a speed below 10 km/h.
Operating conditions
✓ No accessories are connected to the trailer socket.
Function restriction
Vehicle with Parking Aid
If an approaching vehicle is detected in the area behind your ve-
Manoeuvre Assist’s functionality may be limited in unfavourable
hicle, a graphical warning is displayed in the Infotainment. At the
weather conditions.
same time, a continuous tone sounds.
Settings
The activation/deactivation menu will be displayed as follows:
› Press the
button below the Infotainment
and tap the
Infotainment screen.
› Select the manoeuvring assistant menu item.
Or:
192 Park Assist systems › Exit warning
› Engage reverse gear in the infotainment screen tap the func-
Situation in which a system warning occurs
tional surface
› Select the manoeuvring assistant menu item.
Troubleshooting
Message regarding system unavailability
› Switch the ignition o and on again.
› If the system is still not available, seek the help of a specialist
garage.
Warning in the event of an impending collision
Exit warning
▶ The indicator light in the exterior mirror cover on the side
upon which the object was detected will flicker and then light
Usage
up.
The assist system warns when opening the door in front of ap-
▶ A warning signal sounds.
proaching objects, in order to avoid a possible collision.
Warning in the event there is no immediate danger of collision
▶ The indicator light in the exterior mirror cover on the side
upon which the object was detected will light up.
Functionality
The assist system monitors the area beside and behind the vehi-
Requirements
cle up to a distance of approximately 35 m.
✓ The vehicle does not move.
✓ The ignition is switched on.
✓ The speed of the approaching object is faster than 2 km/h.
✓ No accessories are connected to the trailer socket.
After switching o the ignition, the assistant will remain ac-
tive for about 3 minutes.
High-voltage system › High-voltage system and high-voltage battery 193
Restriction
High-voltage system
In the following cases, the system does not have to issue a
High-voltage system and high-voltage battery
warning of an approaching object, or the warning may be issued
incorrectly:
What you should be mindful of
▶ If the weather conditions are unfavourable.
Warning stickers about high voltage
▶ The field of vision of the sensors is limited by an obstacle.
▶ A very fast approaching object.
Settings
To display the system activation/deactivation menu, do the fol-
lowing:
The warning stickers are located on high-voltage components.
› Press the
button below the Infotainment
and tap the
Infotainment screen.
Warning stickers relating to hot surfaces
› Select the Exit Indicator menu item.
The warning sticker is located on components that
can become noticeably warm.
Or:
› Engage reverse gear in the infotainment screen tap the func-
tional surface
› Select the Exit Indicator menu item.
Troubleshooting
Message regarding system unavailability
› Switch the ignition o and on again.
› If the system is still not available, seek the help of a specialist
garage.
194 High-voltage system › High-voltage system and high-voltage battery
DANGER
▶ Contact a specialist company immediately and ensure the
Improper handling of the high-voltage system and battery can
high-voltage battery is checked.
result in burns, injuries or fatal electric shock.
NOTICE
▶ It must always be assumed that the high-voltage battery is
In the event of a vehicle with a flat high-voltage battery, there is
charged and that the high-voltage system is live. This also ap-
a risk of irreversible damage to the high-voltage battery during
plies when the electric drive is switched o and the ignition is
extended periods of use
switched o .
▶ A flat high-voltage battery must be recharged immediately!
▶ The components of the high-voltage system, e.g. the high-
NOTICE
voltage cables and the high-voltage battery, neither catch on
If the vehicle is stationary for several months, the high-voltage
nor touch with the help of objects.
battery can go flat.
▶ Do not carry out any work on the high-voltage system or the
This can lead to the high-voltage battery being damaged at high
high-voltage battery.
ambient temperatures and a low charge state.
▶ Work on the high-voltage system and the systems influenced
▶ Always ensure there is a sucient state of charge with the
by it may only be carried out by qualified service technicians.
high-voltage battery!
▶ Do not open or repair the components of the high-voltage sys-
If the battery is left standing for long periods in very cold en-
tem.
vironments, the low internal temperature of the high-voltage
▶ Do not replace, remove or disconnect the orange high-voltage
battery can reduce the range and limit the driving performance.
cables.
▶ Do not open, replace, or remove the cover of the high-voltage
battery.
High Voltage System Overview
▶ Damage to the vehicle or the high-voltage battery can result in
The high-voltage system in the vehicle consists of the following
the escape of toxic and flammable gases. Open the windows
main components:
to ensure that any gases are vented and exit the vehicle.
▶ Avoid contact with liquids and gases coming from the high-
▶ High-voltage battery
voltage battery.
▶ Power electronics
▶ In the event of fire, leave the vehicle and stay at a safe dis-
▶ Electric motor
tance. Inform rescuers about the fact that it is a vehicle with a
▶ High-voltage air-conditioning compressor
high-voltage battery.» page 31, After an accident.
▶ Charger for the high-voltage battery
CAUTION
▶ Charging socket
Touching the floor of the vehicle or an accident may damage the
▶ Orange high-voltage cable and plug
high-voltage battery.
▶ High-voltage heating system
High-voltage system › Charging of high-voltage battery 195
The high-voltage battery is located under the vehicle floor
Charging of high-voltage battery
and is not accessible to users.
What you should be mindful of
Troubleshooting
WARNING
Danger of life-threatening electric shock, fire hazard, danger of
Fault in electric drive system
damage to vehicle.
illuminates
▶ Follow the correct procedure for charging.
Message regarding fault in the electrical system
▶ Connect the charging cable to a power outlet that is protected
› You may continue driving, exercising appropriate caution. Seek
from both moisture and liquids.
the help of a specialist garage.
▶ Only charge at correctly installed and undamaged sockets and
at a faultless electrical installation. Have the sockets and elec-
illuminates
trical installations checked at regular intervals.
Message regarding fault in the electrical system
▶ Never charge in potentially explosive areas. Components of
› Stop driving! Stop the vehicle and switch o ignition.
the charging cable can cause sparks and thus ignite explosive
› Seek the help of a specialist garage.
vapours.
▶ Protect the charging plugs from moisture and liquids.
Electrical system overheated
▶ Do not carry out work on the vehicle while charging.
illuminates together with
▶ Always remove the charging cable before turning on ignition.
Fit the protective cap and close the battery charging flap.
Message regarding overheating in the electrical system
▶ Never charge several vehicles at the same time at the mains
› Stop driving! Stop the vehicle and switch o ignition.
sockets of a fuse circuit.
› Do not top up with coolant!
▶ Observe the maximum charge capacity of the fuse circuit
› Seek the help of a specialist garage.
used. If the charging cable is plugged into a socket of the same
circuit together with other consumers, the circuit may be
Fault in the engine control system
overloaded and the charging process may be interrupted.
illuminates
WARNING
› Seek the help of a specialist garage.
▶ Never use damaged charging plugs or charging cables.
196 High-voltage system › Charging of high-voltage battery
NOTICE
Overview
When fast charging with direct current (DC), the charging proc-
Charging socket and charging indicator
ess is carried out using a very high charging current. Frequent
rapid charging (DC) can permanently reduce the charging ca-
A
Charging indicator
pacity of the high-voltage battery.
B
Charging socket (AC alternating
▶ Charge the high-voltage battery predominantly with alternat-
current)
ing current (AC) in the charging range of 7.2 to 11 kW.
C
Charging socket (DC direct cur-
NOTICE
rent)
Long periods with the vehicle left standing with a fully charged
high-voltage battery for several months can lead to a permanent
reduction in the charging capacity of the high-voltage battery.
▶ Avoid prolonged vehicle downtimes when the high-voltage
battery is at a high state of charge.
The charging process indicator also helps in illuminating the
At very low and very high temperatures, there may be re-
charging socket.
strictions when charging the high-voltage battery. The charging
time may be longer.
Charging indicator
As the state of charge of the high-voltage battery increases,
the ability of the high-voltage battery to absorb energy decrea-
ses. This slows down the charging process.
A
White light illuminates - The vehicle is parked and un-
locked, the battery flap is open
B
Flashes white - The charging plug has been inserted into
the charging socket and the connection is established be-
tween the vehicle and the charging point
High-voltage system › Charging of high-voltage battery 197
C
Flashes green - Time-delayed charging is activated, but has
Home charging station (wall box) and universal charging cable
not started yet.
When charging with a home charging station or when using the
universal charging cable » page 206, Overview a higher charging
D
Green light pulsating - high-voltage battery is charging
capacity is achieved than with a normal mains socket. The charg-
E
Green light glows - high-voltage battery is charged, charg-
ing time is considerably shortened.
ing process is complete
For information about purchasing a suitable home charging
F
Pulses green three times and then red once - as a result of
station (Wall box) or universal charging cable, please ask a ŠKO-
a fault, the charging plug is not locked in the charging sock-
DA partner.
et » page 200, Troubleshooting
NOTICE
G
Lights up red
The installation of the home charging station (wall box) must be
▶ Charging plug is not locked into the charging sock-
carried out by qualified personnel.
et » page 200, Troubleshooting.
▶ Before installing the home charging station, ensure the electri-
▶ No power supply was detected. » page 200, Troubleshoot-
cal installation of the house is checked.
ing.
▶ Ensure the electrical installation and the home charging station
▶ Fault with the charging system of the vehicle » page 200,
are checked regularly by qualified personnel.
Troubleshooting.
Information label on the battery charging flap
Charging
The sign provides information about the compatibility of the ve-
hicle's charging components and the charging location.
WARNING
Risk of electric shock!
Label of plug type for alternat-
▶ Follow the correct procedure for charging. Do not disconnect
ing current charging (AC).
the charging cable during charging.
Identification of the connector
▶ Never use the charging cable with an extension cord, power
type for charging with direct
strip, adapter or timer.
current DC
NOTICE
Charging options
▶ To operate the charging station, follow the instructions on the
▶ Public charging station (AC alternating current
charging station.
▶ Home Charging Station - Wall box (AC alternating current)
Before charging
▶ Fast charging at charging station (DC direct current)
› Secure the vehicle with the parking brake.
▶ Charging at a usual mains socket or industrial socket
› Switch o the ignition.
198 High-voltage system › Charging of high-voltage battery
If the ignition does not necessarily need to be switched on,
› Insert the charging plug for the
switch it o before charging begins. Leaving the ignition switch-
charging cable into the charging
ed on can extend the charging time.
socket.
› Fully unwind the charging station cable.
› Check whether the charging plug
is straight and fully inserted in the
Or:
charging socket.
› Fully unwind the charging cable and connect it to the charger
The charging plug remains auto-
socket or to a standard mains socket/industrial socket.
matically locked in the charging
Connect the charging cable
socket.
› Unlock the vehicle. The battery flap is unlocked.
Start the charging process
› Press on the battery flap to open
Charging starts automatically after connecting the charging ca-
it.
ble.
Or:
› If necessary, start o the charging process at the charging sta-
tion.
Charging indicator
▶ The charging indicator on the charging socket pulsates green.
▶ The remaining charge time is shown on the instrument cluster
display and it flashes.
› To charge using direct current DC,
remove the protective cap of the
Charging with alternating current (AC)
charging socket (DC).
Interrupt the charging process
› Tap the functional surface for immediate termination of the
charging process in the menu for the charging process setting
in the infotainment » page 202.
The charging process is interrupted. The charging plug remains
locked in the charging socket.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст