Skoda Superb iV (2021 year). Manual in english — page 2

Doors, windows and boot lid › Window - with electrical operation

Electrically operated child lock

Overview of the operating buttons on the

› Press the left button to

driver's door

switch oÄ/off the child

lock in the left rear

door.

› Press the right button

to switch oÄ/off the

child lock in the right

rear door.

The fact that the child

lock is switched on can

be seen by the illuminated displayed in the button.

After switching on the child lock the electric window

Depending upon vehicle equipment:

is also blocked in the respective door.

Front left window

Front right window

Window - with electrical operation

Rear left window

What you should be mindful of

Rear right window

Deactivation/activation of the buttons in the

Force limiter

rear doors

To reduce the risk of pinch injuries when closing the

windows, the vehicle has a force limiter.

Deactivation/activation of the key in the left rear

door (part of the child safety lock with electric

If there is an obstacle, the window closing process is

operation) » page 27, Operation

stopped and the pane retracts by several centime-

tres.

Deactivation/activation of the key in the right

back door (part of the child safety lock with

If the obstacle prevents it from being closed for the

electric operation) » page 27, Operation

next 10 seconds, the closing process is interrupted

once again and the window goes down by several

centimetres.

Operation

If you attempt to close the window again within

10 seconds of the window being moved down for

When the windows are open, irritating noises

the second time, even though the obstacle was not

may occur at certain speeds.

yet been removed, the closing process is only stop-

Opening

ped. During this time, it is not possible to automati-

› Press the corresponding button slightly down-

cally close the windows by pulling the button all the

wards and hold it until the window has reached the

way. The force limiter is, however, switched on.

desired position.

The force limiter is only not operational if you at-

Or:

tempt to close the window again within the next

10 seconds - the window will now close with full

› Press the corresponding button until it stops; the

force! If you wait longer than 10 seconds, the force

window opens automatically. Pressing the button

limiter is switched on again.

again will stop the opening process.

CAUTION

Closing

Risk of injury!

› To close, pull gently upwards on the top edge of

▶ Close the windows carefully, even though they

the corresponding button and hold until the win-

have a force limiter.

dow has reached the desired position.

Or:

› Pull the corresponding button until it stops; the

window closes automatically. By pressing the but-

ton again, the closing process is stopped.

After switching off the ignition, the windows can

still open and close for about 10 minutes so long as

none of the doors are opened.

Doors, windows and boot lid › Sliding/tilting roof

Open all of the windows at the same time

Sliding/tilting roof

› Press and hold the button on the key.

What you should be mindful of

Or:

› Turn off the ignition, open the driver's door, and

To reduce the risk of pinch injuries when closing the

hold down the driver's window button until it

tilt/slide sunroof, the vehicle has a force limiter.

stops.

If the switch is held in the closed position and the

closing process is hindered by an obstacle, the

Close all of the windows at the same time

movement of the glass pane is stopped and the pane

› Press and hold the button on the key.

moves back a few centimetres.

Or:

If the obstacle is not removed, the power limit is de-

› Turn off the ignition, open the driver's door, and

activated when the switch is held again when the

pull upwards on the driver's window button until it

door is closed again (if the time span between the

stops.

closing attempts is less than 5 s). The sliding/tilting

Or:

roof will then close with full force.

› For vehicles with a keyless locking system, hold

CAUTION

one fiÄ£eÙ on the sensor on the outside of the han-

Risk of injury!

dle on the front door.

▶ Close the sliding/tilting roof carefully, even though

there is a force limiter.

Settings

NOTICE

▶ During winter time, if necessary, remove any ice

The window operation is set in the following menu in

and snow around the area of the sliding/tilting roof

the Infotainment system:

before opening.

Menu item for window operation

▶ Always close the sliding/tilting roof before discon-

necting the 12 volt vehicle battery.

Or:

Menu item for window operation

Operating conditions

Troubleshooting

✓ Ignition is switched on.

✓ The outside temperature is higher than -20 °C

The window regulator has stopped working after

(applicable for the opening of the sliding/tilting

repeated opening and closing

roof).

The window regulator mechanism could have over-

heated.

› Allow the window regulator mechanism to cool

Operation

down.

Gradual opening

The window operation does not work after discon-

Complete opening

necting the 12 volt vehicle battery

› Enable window operation » page 29.

Gradually reset

Fully reset

Activation after disconnecting the 12-volt

vehicle battery

Activate automatic window operation

› Turn on the ignition.

Gradual opening

› Pull the corresponding button upwards and the

window closes.

Full opening

› Release the button.

Gradual closing

› Pull up the respective button and hold for 1 sec-

ond.

Complete closing

Doors, windows and boot lid › Sunblind - with manual operation

After moving the switch to the position B the

Sunblind - with manual operation

sliding/tilting roof is in the low-noise position (at a

speed of about 80 km/h).

Operation

After another movement to position B the sliding/

› Pull the handle in the

tilting roof opens completely.

appropriate direction.

After switching off the ignition, the sliding / tilt-

ing roof can be operated for about 10 minutes as

long as none of the doors are opened.

Comfort operation of the tilting/sliding sunroof

The comfort operation makes it possible to lock the

sliding/tilting roof with the key if necessary.

› Press and hold the button to turn it off.

› Press and hold the button to close it.

On vehicles with a keyless locking system, it is possi-

Sunblind - with electrical operation

ble to close the sliding/tilting roof via the sensor in

the door handle of the front door.

Operation

› Hold one fiÄ£eÙ on the sensor on the outside of the

Opening

handle on the front door » page 25.

Closing

› Press or hold the but-

Troubleshooting

ton to move the roller

blind.

Operation of the sliding/tilting sunroof does not

work after disconnecting the 12-volt vehicle bat-

› Press or release the

tery

button to stop the roll-

› Activating operation of the sliding/tilting sun-

er blind from moving.

roof » page 30.

Activation after disconnecting the 12-volt

vehicle battery

Activating operation of the sliding/tilting sunroof

› Turn on the ignition.

› Keep the button pressed down. The sunblind

opens and closes again.

› Release the button.

Sunblind for the rear window

Operation

› Turn on the ignition.

› Pull the switch all the way down and hold it down.

After about 10 secs, the sliding/tilting roof opens

and closes again.

› Release the switch.

Brightness protection

› Pull out the sun protection blind by the handle and

hang it into the holders A .

Doors, windows and boot lid › Sun protection roller blinds for the rear door panes

Rolling up

Boot lid - with manual operation

› Remove the sun protection blind from the holders

at the handle and let it roll in slowly.

Operation

Opening

Sun protection roller blinds for the rear

› Press the handle and

door panes

lift the lid.

Operation

The option to open by pressing the handle is deacti-

vated once a speed of 5 km/h is reached. This is acti-

vated again after the vehicle has stopped and a door

is opened.

Brightness protection

Closing

› Pull out the sun protection blind by the handle and

› Grasp the fixtuÙe A

hang it into the holder A .

and pull the lid down.

Rolling up

› Remove the sun protection blind from the holder

at the handle and let it roll in slowly.

Sun visors

Folding up and folding down

CAUTION

Danger of opening the tailgate while driving!

▶ Make sure that the latch engages after the Ĕap is

closed.

Set a delayed lid lock

If the lid is unlocked with the

button on the key,

the lid is automatically locked again after closing.

The period after which the lid is locked automatically

Swivel the front visor towards the windscreen

can be extended by a specialist garage.

Swivel the visor towards the door

CAUTION

Boot lid - with electrical control

Objects attached to the sun visors can restrict the

Operation

view to the outside.

In the event of sudden braking or an impact, these

CAUTION

can also cause injuries.

Risk of injury!

▶ Do not attach anything to the sun visor.

▶ Only operate the tailgate when there is nobody or

no objects in the swivel area.

CAUTION

Danger of opening the tailgate while driving!

▶ Make sure that the latch engages after the Ĕap is

closed.

Doors, windows and boot lid › Electrically operated contactless boot lid

NOTICE

Button on the key

▶ Do not manually close the tailgate when moving.

› Press the

button to

▶ Before operating the tailgate, check that there are

open, close or stop the

no objects in the swivel area that could damage the

movement of the tail-

tailgate. Also check that there are no objects with-

gate.

in the immediate vicinity of the vehicle that could

The option to lock exists

damage the vehicle interior and the transported

only on vehicles with a

objects.

keyless locking system.

If the tailgate hits an obstacle when closing, it

The key must not be in

stops and an audible signal sounds.

the vehicle and must be

When automatically closing the tailgate, e.g. un-

at a distance of max. 2 m

der the weight of snow, a broken beep sounds.

from the tailgate.

The rear parking light ĔashiÄ£ twice indicates

The tailgate can also be closed by pulling it bÙieĔû

that the Ĕap is closed.

downwards.

Handle in the tailgate

› Press the handle to

Settings

open, close or stop the

Set the uppermost position of the tailgate and

movement of the tail-

store it

gate.

It makes sense to set the top position of the tailgate,

The option to open by

e.g. setting for the opening of the tailgate in a limited

pressing the handle is

space due to the garage height.

deactivated once a

› Stop the tailgate in the desired position.

speed of 5 km/h is

reached. This is activated

› Press the button and hold down on the lower

again after the vehicle

edge of the tailgate until an audible signal sounds.

has stopped and a door

Re-adjusting the top starting position of the tail-

is opened.

gate

Button in the tailgate

› Carefully raise the tailgate manually to the limit.

› Press the button and hold down on the lower

› Press the button to

edge of the tailgate until an audible signal sounds.

open, close or stop the

movement of the tail-

gate.

Troubleshooting

The tailgate does not react to the opening signal

›

There is a possible obstacle, e.g. snow; remove it.

Or:

› Press the handle in the tailgate and lift the lid.

Button in the centre console

Or:

› To open the tailgate,

› Mechanically unlock the Ĕap » page 33.

hold the button until

The tailgate does not react to the closing signal

the tailgate starts to

› Close the tailgate manually.

open.

NOTICE

› Press the button to

▶ Close the tailgate slowly, push down the tailgate

stop the tailgate from

and push in the lock on the centre of the rear edge

moving.

of the tailgate.

Electrically operated contactless boot lid

Operating conditions

✓ Ignition off.

✓ You have the vehicle key with you.

Doors, windows and boot lid › Unlocking the boot lid

✓ No trailer or other accessory is connected to the

▶ Maintenance and repair work in the back of the ve-

trailer socket.

hicle

Operation

Unlocking the boot lid

Opening/closing the lid

Release

If the boot lid does not open, it can be unlocked

manually by the following procedure.

› Stand in the middle behind the bumper.

› Move one foot quickly under the bumper and re-

move it again.

›

Insert a screwdriver into the opening in the panel.

If the lid doesn’t move, wait a few seconds and re-

› Release the tailgate by moving it in the direction of

peat the swing motion.

the arrow.

Display of the opening/ closing process

The rear turn signal lights light up when the lid is

opened and closed. When you close the lid, audible

signals are additionally sounded.

Stopping/ restoring lid movement

The lid movement can be stopped by a rapid swing-

ing motion with your foot. Lid movement is restored

by a subsequent swinging motion with your foot.

Restriction

The system function may be restricted in the follow-

ing cases:

▶ Downpour

▶ Dirty rear bumper

Settings

Activating and deactivating

The function is activated and deactivated in the fol-

lowing menu in the Infotainment:

Or:

We recommend that the function is deactivated in

the following cases:

▶ Installation of a roof rack

▶ Coupling a trailer or another accessory to the hitch

▶ Car wash

Seats, steering wheel and mirror › Front seat - with manual operation

Seats, steering wheel and mirror

Front seat - with electrical operation

Front seat - with manual operation

Controls on the seat

Adjusting the seat

Controls on the seat

Adjust in a longitudi-

nal direction

Adjust the inclination

Adjusting the height

Adjusting the seat back

Adjusting the seat in the longitudinal direction -

after releasing the operating lever, the lock must

Adjust the inclination

audibly click into place

Adjusting the height

Adjusting the angle of the backrest - do not lean

against the backrest during adjustment

Adjusting the lumbar support: Extent of the cur-

vature

After a certain time, play can develop within the ad-

justment mechanism of the backrest angle.

Adjusting the lumbar support

Set the position of

Folding passenger seat backrest

the curvature

Set the extent of the

Folding down

curvature

› Pull on the operating

lever.

› Fold the backrest for-

wards until it clicks in-

to place.

Adjusting the passenger seat from the rear seats

Adjusting the angle

of the seat backrest

Adjusting a seat in a

Folding back up

forward/back direc-

› Pull on the operating lever.

tion

› Press the backrest backwards until it audibly clicks

into place.

Seats, steering wheel and mirror › Memory function of the seat

Set the length of the seat manually

Settings

› Press the release han-

Storing driver's seat and exterior mirror position

dle.

for driving forwards

› Push the front part of

› Turn on the ignition.

the seat forwards or

backwards.

› Adjust the seat and the

exterior mirrors.

› Press the button A

and within 10 seconds

one of the memory

buttons B .

Storing is oÄfiÙmed by

Memory function of the seat

an acoustic signal.

The seat position can be stored if the angle of in-

Functionality

clination of the seat back relative to the seat surface

Valid for vehicles with electrically adjustable driver's

is less than approximately 110° and the seat is not in

seat.

any of the end positions.

Each of the memory buttons on the driver's seat can

Save front passenger seat position

be used to store and recall the set driver's seat and

Storing the passenger seat position is analogous to

exterior mirror position.

storing the driver's seat position.

Depending on the equipment, the front passenger

Storing front passenger´s exterior mirror position

seat may also have a memory function.

for reversing

› Turn on the ignition.

›

Activate the folding function of the mirror in the

Operation

Infotainment in the following menu:

Retrieve stored position

› With the ignition off and the driver’s door open,

Or:

press the desired memory button.

› In other instances, hold the button for example

with the ignition switched on or the driver's door

› Turn the exterior mirror knob to the position .

closed.

› Engage reverse gear.

› Adjust the mirror to the desired position.

The passenger seat position can be retrieved in the

› Disengage reverse gear.

same way.

The set mirror position is saved.

Stop position change

› With the ignition off and the driver's door open,

When changing the stored seat and exterior mir-

press any button on the seat to be adjusted.

ror position for forward driving, the passenger exte-

rior mirror position for reverse driving must be re-

Or:

stored.

› Press the button on the key.

› In other cases, release the held memory button.

Seat massage function

Turn on/turn off

› Press the button.

Function switches off

automatically after 10

minutes.

Seats, steering wheel and mirror › Rear seats

CAUTION

Folding the backrests forward from the

▶ Only switch the function on and off when the vehi-

luggage compartment

cle is stationary.

Rear seats

Folding down the seat backs

Before folding down

› Insert the rear headrests as far as they will go or

remove them.

› Adjust the position of the front seats in such a way

that they are not damaged by the folded-down

seat backrests.

› For vehicles with a mesh partition, roll it into the

Park position of rear seat belts

housing, then unlock the left seat backrest fol-

lowed by the right seat backrest.

› Pull the outer seat belt to the side trim.

Folding forwards from the passenger compart-

ment

› Press the release han-

dle and fold the seat

forwards.

Headrests

Adjusting the headrests

Folding forwards from the boot

Front headrests

› Pull on the lever.

› Hold the safety button

and move the headrest

The seat back is un-

in the desired direc-

locked and partly fol-

tion.

ded forwards.

Folding back up

Rear headrests

› Pull the outer seat belt

› Move the headrest in

to the side trim.

the desired direction.

› Fold the seat backrest

When pushing down,

back up.

press and hold the

safety button.

The release handle must

audibly click into place.

› Check that the seat

backrest has locked in

place. The pin A must

not be visible.

Folding side bolsters on the rear headrest

The folded down side bolsters reduce uncontrolled

sideways head movement , e.g. when sleeping.

Seats, steering wheel and mirror › Sleep package

› Adjust the headrest to the initial pulled out posi-

Front armrest

tion.

Settings

› Fold down the side bol-

sters on the head rest.

Adjusting the height

› Raise the backrest to

one of the locked posi-

tions.

Folding down

›

Raise the backrest be-

yond the highest

locked position and

fold it down again.

Removing and inserting the rear headrests

Rear armrest

Removing

› Partially fold the re-

Settings

spective seat back for-

wards.

› Fold down the armrest.

› Move the headrest up

The folded-down arm-

to the stop.

rest can be used as a

storage table.

› Hold safety button A

and, at the same time,

push safety button B

into the opening with a

Ĕat-head screwdriver

and remove the headrest.

Inserting

› Insert the headrest into the seat backrest.

Load-through device

The safety button must click into place.

Open and close

Open from the passenger compartment

Sleep package

› Press the lid in the up-

The package includes

per area and pull on

folding side bolsters for

the handle.

the headrest and a bag

› Open the lid.

with a blanket.

Open from the luggage compartment

› Press the store button.

› Open the lid.

Seats, steering wheel and mirror › Steering wheel

Closing

Setting the steering wheel position

› Fold back the lid from the passenger compartment

until it clicks into place.

WARNING

Risk of an accident!

After closing, the red mark on the back of the cov-

▶ Do not adjust the steering wheel while driving.

er above the safety button must not be visible.

› Swing the safety lever

WARNING

downwards.

▶ The through-loading channel is only intended for

transporting skis in a secured through-loading bag.

Steering wheel

Buttons/dials on the multifunction steering

› Adjust the steering

wheel

wheel to the desired

position.

› Press the safety lever

as far as it will go.

Switch voice control oÄ/off

Heated steering wheel » page 59

Rotate - Adjust the volume

Troubleshooting

Press - Switch the sound off/oÄ

Power assisted steering faulty

Switch to the next track/station played

illuminates - total failure of the power assisted

Switch to the previous track/station played

steering, failure of steering assistance

Show menu of assistance systems

› Turn off the ignition, start the engine and drive a

few meters.

Switching the Travel Assist assistance system

› If the indicator light

does not go out, do not

on / off » page 164

continue driving. Seek the help of a specialist ga-

Depending upon vehicle equipment:

rage.

▶ Operating an analogue instrument clus-

ter » page 60

illuminates - partial failure of the power assis-

▶ Operating a digital instrument clus-

ted steering, possible reduction in power

ter » page 61

steering

Depending upon vehicle equipment:

› Turn off the ignition, start the engine and drive a

few meters.

▶ Operating an analogue instrument clus-

ter » page 60

› If the indicator light

does not go out, you can

drive on, exercising appropriate caution. Seek the

▶ Operating a digital instrument clus-

ter » page 61

help of a specialist garage.

Depending upon vehicle equipment:

Steering column lock faulty

▶ Operating an analogue instrument clus-

Ĕashes

ter » page 60

Message regarding a fault in the steering col-

▶ Operating a digital instrument clus-

umn lock

ter » page 61

› Stop the vehicle.

› Seek the help of a specialist garage.

Seats, steering wheel and mirror › Interior rear-view mirror

After switching off the ignition, it is then no longer

Positions of the rotary knob

possible to switch on the ignition, to lock the steer-

Adjust the left-hand

ing and to switch on the electrical components.

exterior mirror

Ĕashes

Switch off operation

Message regarding a fault in the steering lock

Adjust the right-

› You may continue driving, exercising appropriate

hand exterior mirror

caution. Seek the help of a specialist garage.

Fold mirror in elec-

trically (to fold back

Steering column lock not unlocked

out, select a diffeÙ-

Ĕashes

eÄt position)

Message concerning the required steering

Heat the mirror

wheel movement

when the engine is running

› Move the steering wheel slightly back and forth.

Adjusting the mirror surface

› If the steering does not unlock, stop the vehicle

› Select position or .

and seek the help of a specialist garage.

› Turn the rotary knob in the direction of the arrows.

Folding electrically folding mirrors automatically

Interior rear-view mirror

If this function is activated, the mirrors are folded in

when the vehicle is locked and folded back when it is

Operation

unlocked.

Locking of the vehicle is not indicated by the fact

Interior mirror with manual darkening

that the mirrors fold in. Locking of the vehicle is indi-

Mirror is not dark-

cated by the turn signal lights ĔashiÄ£.

ened

Manually foldable mirrors

Mirror darkens

› Fold the mirror towards the side window by apply-

ing pressure with your hand.

Setting the mirror surfaces synchronously

If this function is activated, the mirror surface of the

Interior mirror with automatic darkening

passenger mirror is also set when the mirror surface

Darkening of the mirror is automatically controlled

of the driver's mirror is set.

through the sensors in the mirror once the engine is

Mirror with memory function

started.

Valid for vehicles with electrically adjustable driver's

CAUTION

seat.

Risk of an accident!

The current setting for the exterior mirror surfaces

A glowing display e.g. a mobile phone or navigation

can be stored in the memory of the driver's

device may affet the function of the automatic mir-

seat » page 35.

ror darkening.

▶ Do not attach these devices close to the mirror.

Lower the passenger mirror surface when revers-

ing

Valid for vehicles with electrically adjustable driver's

Wing mirror

seat.

The mirror surface of the passenger mirror takes in

Operation

the memory of the driver's seat » page 35 stored po-

Depending on the equipment, the mirrors can be fol-

sition to improve visibility when reversing.

ded in manually or electrically.

Operating conditions

✓ The function can be activated in Infotainment.

✓ The mirror position is saved.

✓ The reverse gear is engaged.

✓ The adjustment knob is in the position.

The mirror automatically resumes the home position

when driving forward at speeds above 15 km/h or

after the ignition is switched off.

Restraint systems and airbags › Seat belts

WARNING

Restraint systems and airbags

Risk of an accident!

The exterior mirrors make objects appear farther

Seat belts

away.

▶ Use the rear-view mirror to determine the distance

Functionality

from vehicles behind.

Seat belts that are fastened correctly offeÙ very

NOTICE

good protection in the event of an accident. They re-

Danger of mirror damage!

duce the risk of an injury and increase the chance of

▶ If the electrically foldable mirror is swung out by

survival in the event of a major accident.

external iÄĔueÄes (e.g. due to an impact during

WARNING

manoeuvring), fold the mirror in using the rotary

▶ The seat belts must not be removed or altered in

knob and wait for an audible folding sound.

any other way.

▶ If the driver's seat belt is damaged, stop driving.

Settings

▶ If another seat belt is damaged, the seat must not

be occupied.

Activation or deactivation of the automatic folding

▶ Do not repair damaged seat belts yourself.

of the exterior mirrors, the synchronous adjustment

▶ Have a damaged seat belt replaced immediately by

of the mirror surfaces as well as the lowering of the

a specialist garage.

passenger-side mirror surface when reversing are

carried out in the Infotainment in the following

Automatic belt retractor

menu:

The automatic retractor locks the belt in the event

of a jerky pull on the belt. The belts lock, for example,

when full braking, when the car accelerates, when

Or:

driving downhill and when cornering.

WARNING

▶ If the seat belt does not lock when pulled jerkily,

have the retractor checked by a specialist garage.

Troubleshooting

Belt tensioners

Electric mirror operation impaired

The safety of the driver, front passenger and passen-

› Adjust the mirror surface by pressing it lightly with

gers on the outer rear seats who are wearing their

your fiÄ£eÙ.

seat belts is enhanced by the belt tensioners fitted

CAUTION

to the inertia reels on the front and rear external seat

Risk of burns!

belts.

▶ Do not touch heated exterior mirror surfaces.

If there is a collision with a certain severity, the seat

belt is tightened by the belt tensioner so that unwan-

ted body movement is prevented.

The belt tensioner can also be deployed when the

seat belt is not fastened.

Belt tensioners are not activated in the event of a

roll-over, minor collisions or in accidents in which no

major forces are produced.

Smoke is released when the belt tensioner is de-

ployed. This does not indicate a vehicle fiÙe.

Reversible belt tensioner

Vehicles with a proactive occupant protection sys-

tem include reversible belt tensioners » page 167.

The reversible belt tensioners increase safety for the

belted driver and front passenger by automatically

tightening the seat belt tightly over the body in criti-

cal driving situations and then releasing it again.

Status display in the instrument cluster display

Depending on the type of display, the display can be

as follows:

Restraint systems and airbags › Child seat

illuminated - a front or rear seat belt is not fas-

› Press the safety button

tened

and move the seat belt

height adjuster down

lights up - rear seat not occupied

to reduce the height.

illuminated - a rear seat belt is not fastened

› After adjustment, fiÙm-

lû pull on the belt to

ensure that the seat

illuminated - a rear seat belt is not fastened

belt height adjuster has

correctly locked in

illuminated - a rear seat belt is fastened.

place and that the belt

is locked securely.

illuminated - a rear seat belt is fastened.

Troubleshooting

Blocked belt retractor

› Grasp the strap in the

Operation

middle and pull quickly.

› Hold the strap and let

Fastening the seat belt

it roll up slowly.

› Grasp the buckle latch

› Pull on the strap to see

and slowly pull the belt

if the retractor is

over the chest and pel-

working properly.

vis towards the buckle.

› If the strap is still

› Insert the buckle latch

blocked, repeat the un-

into the buckle until

locking procedure

there is an audible

once or twice.

click.

› If the strap is still blocked, seek the help of a spe-

› Pull on the belt to en-

cialist garage.

sure that the buckle is

securely fastened.

Unfastening the seat belt

Child seat

› Grasp the buckle latch

What you should be mindful of

and release it by press-

ing the red button.

For how to install and use the child seat, please note

› Hold the belt so it does

not twist when rolling

instructions of the child seat manufacturer.

up.

For safety reasons, we always recommend that chil-

dren are transported on the back seats. Carry chil-

dren on the front passenger seat only in exceptional

cases.

Use child seats according to standard ECE-R 44 and

ECE-R 129 of the European Economic Commission.

Settings

Child seats according to standard ECE-R 44 and

ECE-R 129 are marked with the test symbol: large E

› Move the seat belt

in a circle, with the test number below.

height adjuster up-

wards to increase the

We recommend using child seats from the ŠKODA

Original Accessories range. These child seats have

height.

been developed and tested for use in ŠKODA vehi-

cles. They satisfy the standard ECE-R 44 or ECE-R

129.

Restraint systems and airbags › Child seat

WARNING

Sticker on the passenger sun visor

▶ When installing the child seat on the rear seat, ad-

Sticker on the central body pillar on the passenger

just the front seat so that there is no contact be-

side

tween the front seat and the child seat or the child

carried in the child seat.

The following instructions must be followed when

▶ Before installing a forward-facing child seat, adjust

using a child seat on the front passenger seat:

the headrest so that it is as low as possible.

▶ It is essential to deactivate the front passenger air-

▶ If the headrest prevents the child seat from being

bag if using a child seat in which the child is trans-

fitted, adjust the headrest to the highest position.

ported with its back facing the direction of trav-

▶ When installing the child seat, avoid contact be-

el » page 46.

tween the roof and the rear pillar. If the head air-

▶ If possible, adjust the front passenger seat back-

bag is deployed, there is a risk of injury.

rest so that it is vertical, to ensure that there is se-

▶ If using a separate child seat cushion, adjust the

cure contact between the backrest and the child

headrest so that the child's head is Ĕush with, but

seat.

not protruding above the height of the top edge of

▶ If possible, move the front passenger seat back-

the headrest.

wards so that there is no contact between the

front passenger seat and the child seat behind it.

▶ Adjust the height-adjustable front passenger seat

Using a child seat on the front passenger seat

as much as possible.

When using a child seat on the passenger seat, any

▶ Set the front passenger seat belt as high up as pos-

ouÄtÙû-speifi regulations must be observed.

sible.

Never use a child seat in which the child is carried

WARNING

with his or her back to the direction of travel on a

Risk of the seat belt causing a neck injury to the

seat protected by an active airbag placed in front of

transported child!

the seat. This could cause serious injury to the child,

▶ For child seats in groups 2 and 3, ensure that the

even death.

guide fittiÄ£ attached to the child seat headrest is

positioned in front of or at the same height as the

This is also indicated by the following stickers:

seat belt height adjuster on the central body pillar.

▶ Adjust the height of the front passenger seat belt

so that the belt passes through the guide fittiÄ£

without kinking and is not bent over the edge of

the guide fittiÄ£.

WARNING

▶ As soon as the rear-facing child seat is no longer

being used on the front passenger seat, activate

the front passenger airbag again.

Recommended child seats

Grouping of child seats according to standard ECE-R 44.

Group

Weight of the child

up to 10 kg

up to 13 kg

9-18 kg

15-25 kg

22-36 kg

Restraint systems and airbags › Fasteners for child seats

Recommended child seats

Approval number

Group

Manufacturer

Type

Attachment

Order number

(E1 ...)

(up to 13

Britax Römer

Baby Safe Plus

Isofix base frame

1ST019907

04 301146

kg)

ISOFIX and TOP

Britax Römer

Duo Plus TT

DDA000006

04 301133

(9-18 kg)

TETHER

2-3

Britax Römer

Kidfix XP ^a)

ISOFIX

000019906K

04 301198

(15-36 kg)

Britax Römer

Kidfix II XP

ISOFIX

000019906L

04 301323

For optimum protection, especially in the event of a side impact, it is recommended that you use this child

seat complete with the backrest.

Fasteners for child seats

Use of child seats

Overview of usability of child seats according to standard ECE-R 16.

Child seats with the ISOFIX system

Front passenger’s seat

Rear seats

Size category of

With deactiva-

Group

With activated

child seat ^a)

ted front airbag

Outer seats ^c)

Centre seat

front airbag ^b)

(up to 10 kg)

(up to 13 kg)

(9-18 kg)

IUF

(15-25 kg)

(22-36 kg)

The size category of the child seat is indicated on the child seat plate.

If the passenger seat is equipped with ISOFIX system holding eyelets, it is suitable for the installation of

an ISOFIX child seat with “Semi-Universal” approval.

The seat is suitable for the fixiÄ£ system ISO/R3.

IL The seat is suitable for the ISOFIX child seats with “Semi-Universal” approval.

IUF The seat is suitable for forward-facing child seats and is permitted for use in this weight category.

X The seat is not equipped with eyelets for the ISOFIX system.

Restraint systems and airbags › Fasteners for child seats

i-Size

Front passenger’s seat

Rear seats

With activated front air-

With deactivated front

Outer seats

Centre seat

bag

airbag

i-U

i-UF The seat is suitable for forward- and backward-facing i-Size child seats of the “Universal” category.

X The seat is not suitable for i-Size child seats of the “Universal” category.

Child seat fastened with a safety belt

Front passenger’s seat

Rear seats

Group

With activated front

With deactivated front

Outer seats

Centre seat ^a)

airbag

U ^b)

(up to 10 kg)

U ^b)

(up to 13 kg)

(9-18 kg)

(15-25 kg)

(22-36 kg)

It is forbidden to install a child seat with a support foot in the middle rear seat.

Adjust the height-adjustable front passenger seat as much as possible.

U The seat is suitable for the child seat category “Universal” and is permitted for use in this weight group.

UF The seat is suitable for forward-facing child seats in the “Universal”category and is permitted for use in this

weight group.

X The seat is not suitable for children in this weight group.

Overview

› Remove the covers be-

fore installing the child

ISOFIX

seat.

WARNING

▶ On the retaining eyelets that are used to install the

child seat with the ISOFIXSystem provided, do not

attach any other child seats, belts or objects.

The ISOFIX system allows for the fast and secure in-

stallation of the child seat. The eyelets for installing

the child seat using the ISOFIX system are located

on the outer rear seats and possibly on the front pas-

TOP TETHER

senger seat.

WARNING

A child seat that uses the ISOFIXsystem can only be

▶ Child seats with the TOP TETHER- Only use the

installed in the vehicle if it is approved for this vehi-

system on the seats with the eyelets TOP TETH-

cle type. Further information can be obtained from a

ERSymbol are provided.

ŠKODA partner or from a list of vehicles enclosed

▶ Only attach one belt from the child seat to a lock-

with the child seat.

ing eye TOP TETHER-Fasten the system.

▶ When attaching the child seat with the TOP TETH-

ER- No other object may be attached to the eyelet

TOP TETHERSystem.

Restraint systems and airbags › Airbags

WARNING

Danger of serious or fatal injuries!

▶ Maintain the correct seating position.

▶ Do not keep your limbs in the deployment area of

the airbags.

In the following situations, no airbags are deployed:

▶ Minor frontal and side collisions

▶ Rear-end collision

▶ Vehicle rollover

Holding eyelets on the rear seats

If the measured deceleration rate is below the refer-

The belt fastened into the TOP TETHER system re-

ence values programmed into the control unit, the

stricts the movement of the upper part of the child

airbags will not be deployed despite possible serious

seat. The holding eyelets for attaching the belt are

vehicle damage.

located on the outer rear seats A , as well as on the

middle rear seat B when necessary.

Airbag overview

The installation location of the airbags is marked

Airbags

with the lettering

Usage

The airbag system provides, as a supplement to the

seat belts, additional occupant protection during se-

vere frontal and side-on collisions.

The best possible protective effet of the airbag is

achieved only when the seat belt is also worn. The

airbag system is no substitute for the seat belts.

What you should be mindful of

Front airbags

Airbag systems can only properly protect if all occu-

Side airbags - front

pants have been secured and they are in the correct

Head airbags

seating position.

Side airbags - rear

No persons, animals or objects such as cup holders

or hangers for clothes may be in the deployment

Driver's knee airbag

area of the airbags » page 45.

WARNING

▶ Do not cover or stick anything over the steering

Danger of a functional restriction of the side airbags!

wheel or the dash panel. The front airbags were

▶ Do not exert excessive forces, e.g. impacts, on the

not able to deploy.

seat backs.

The front passenger airbag should be switched off in

▶ Do not use seat covers that have not been ap-

some situations » page 46.

proved by ŠKODA.

▶ Have damaged seat covers at the installation loca-

tion of the side airbags repaired by a specialist ga-

Functionality

rage.

When sinking into the iÄĔated airbag, the forward

Deactivating the airbags

movement of the body is damped and the risk of in-

We recommend having airbags other than the front

jury is reduced.

passenger airbag deactivated » page 46, Opera-

As the airbags iÄĔate, smoke is released. This

tionby a ŠKODA service partner.

does not indicate a vehicle fiÙe.

Deactivation of the airbags should be considered in

cases such as the ones below:

Airbag deployment in the event of an accident

Airbag deployment is iÄĔueÄed by many factors.

▶ If the driver's seat adjustment is correct, the dis-

The deceleration rate at the time of impact is crucial.

tance of at least 25 cm between the centre of the

Restraint systems and airbags › Key switch for the front passenger airbag

steering wheel and the sternum cannot be main-

Operation

tained.

Before switching off/sõitchiÄg on the front pas-

▶ Additional operating controls for a physically disad-

senger airbag

vantaged driver are installed in the vehicle.

› Remove the key bit.

▶ The vehicle has special seats, e.g. orthopaedic

seats without side airbags.

Switch front passenger front airbag oÄ/off

illuminates for 4 seconds after the ignition is

› Switch off the ignition.

switched on and then Ĕashes for 12 seconds

› Open the storage com-

- Airbag or belt tensioner deactivated with the diag-

partment on the pas-

nostic device

senger's side.

Message regarding the deactivated airbag or belt

› Insert the key bit into

tensioner

the slot in the key

WARNING

switch as far as it will

If an airbag is deactivated during the sale of the vehi-

go.

cle, inform the buyer!

› To Switch off, carefully

rotate the key switch

into the position

Requirements

› To Switch on, carefully rotate the key switch into

the position

✓ Ignition on

› Remove the key bit from the slot.

› Close the storage compartment on the passenger's

Troubleshooting

side.

› Turn on the ignition and check that the front pas-

Airbag system faulty

senger airbag indicator lights are lit up.

illuminates

Message regarding an airbag fault

Warning lights

› Seek the help of a specialist garage.

▶ After switching on the igni-

tion, the two indicator lights

light up bÙieĔû.

Key switch for the front passenger

▶ If the system is OK, both of

airbag

the indicator lights go out.

▶ One of the indicator lights then lights up again de-

Usage

pending on the position of the key switch:

Deactivation of the front passenger airbag is provi-

lights up - front passenger airbag switched

ded for the following cases, for example:

off

▶ A rear-facing child seat is mounted on the front

lights up 65 secs after the ignition is

passenger seat.

switched on - passenger front airbag

▶ The minimum distance to the control panel cannot

switched on

be maintained.

Troubleshooting

What you should be mindful of

Key switch for airbag deactivation is faulty

WARNING

Ĕashes together with

Danger of fault in the passenger airbag deactivation

The front passenger airbag will not be de-

system!

ployed in the event of an accident!

▶ Only switch off the airbag when the ignition is

› Have the airbag system checked by a specialist ga-

switched off.

rage immediately.

WARNING

Danger of unexpected deployment of the passenger

airbags in an accident!

▶ After switching off the passenger airbag with the

key bit, do not leave the key bit inserted in the key

switch while driving. Shocks can cause the Key as-

signment to turn in the slot and trigger the airbag.

Lighting, windscreen wipers and washers › Exterior lighting

illuminates

Lighting, windscreen wipers and

› Switch on the light.

washers

Exterior lighting

Operation

Functionality

Switching off the

Unless otherwise stated, the light works when the

lights except the

ignition is switched on.

daytime running

Daylight running lights

lights

The daytime running lights illuminate the area in

Switching the low

front of the vehicle.

beam oÄ/off auto-

matically

In vehicles for certain markets, this also provides

Switching on the

lighting for the rear area of the vehicle.

parking lights

Operating conditions

Switching on the low

✓ The lights switch is in position

beam

Switching the low beam oÄ/off automatically

As the basic position of the light switch, use posi-

The low beam is automatically switched on or off de-

tion

pending on the lighting conditions.

High beam and headlight Ĕasher

Operating conditions

The high beam works when the low beam is on.

✓ The light switch is in the

position.

Switch on high beam

The automatic headlight circuit is indicated by the il-

lumination of the symbol

in the light switch.

Switch off main

beam / switch on

Switching low beam on automatically in rain

headlight ĔasheÙ

Operating conditions

✓ The light switch is in the

position.

When the main beam or

✓ The function is activated.

headlight ĔasheÙ is

✓ The windscreen wipers are switched on for lon-

switched on, the indica-

ger than 30 seconds.

tor lamp lights up in the instrument cluster

The automatic headlight circuit is indicated by the il-

CAUTION

lumination of the symbol

in the light switch.

Risk of an accident!

▶

Do not dazzle other road users with the high beam.

Full LED Headlights

When the light switch is in position

, the head-

Turn signal

lights provide the best possible beam of light in front

Switching on the

of the vehicle. The Dynamic cornering light function

turn signal light on

ensures the best possible illumination of the curve

the right - the warn-

area.

ing light Ĕashes in

CORNER function

the instrument clus-

The CORNER function is intended for turning or ma-

ter

noeuvring (e.g. when parking).

Switching on the

turn signal light on

The function illuminates the vicinity of the vehicle

the left - the warn-

front in the direction of travel.

ing light Ĕashes in

Operating conditions

the instrument clus-

✓ The turn signal is switched on or the front wheels

ter

are steered sharply.

Turn signal - convenience signalling

✓ The low beam is switched on.

Convenience signalling enables three Ĕashes of the

✓ The fog lights are not switched on.

turn signal lights without having to move the lever

✓ The driving speed is lower than 40 km/h.

up or down.

When no light is switched on

› Tap the control lever up or down.

The symbol in the light switch may also light up in

The corresponding turn signal lights Ĕash three

the instrument cluster, indicating that it is necessary

times.

to switch on the light.

Lighting, windscreen wipers and washers › Exterior lighting

Tap the lever in the opposite direction ahead of

Double-sided parking light

time to stop signalling.

The two-sided parking light allows the parked vehi-

cle to be illuminated through activation of the side-

Fog light

lights.

Positions for pulling out

› Turn on the ignition.

the light switch

› Turn the light switch to position

Fog lights - when

› Switch off the ignition.

switched on, the in-

› Lock the vehicle.

dicator light in the

instrument cluster il-

When the parking light is switched on, an acoustic

warning signal sounds after the ignition is switched

luminates

off and the driver's door is opened. After a few sec-

Rear fog light - when

onds or after the driver's door is closed, the warning

switched on, the in-

signal will stop.

dicator light in the

instrument cluster illuminates

The light may switch off automatically if the 12-volt

vehicle battery is too low. If the parking lights on

› Turn the light switch to position

both sides are switched on with the ignition off, the

› Pull the light switch to the appropriate position.

lights will not be switched off automatically and the

The rear fog light does not illuminate when an ac-

12 volt vehicle battery may be discharged.

cessory is connected to the trailer socket.

The rear fog lamp automatically shuts off when

Settings

the boot lid is opened.

The indicator light remains lit.

Activating/deactivating the automatic headlights

system in rain

Hazard warning light system

The function is activated or deactivated in the fol-

› Press the button to switch on or off in the mid-

lowing menu in the Infotainment system:

dle part of the control panel.

The hazard warning lights can be switched on auto-

matically during hard braking. The hazard warning

Or:

lights are then switched off again automatically

when starting off or accelerating.

Activating/deactivating convenience signalling

When the hazard warning system is on and the

The function is activated or deactivated in the fol-

turn signal is switched on, the hazard warning lights

lowing menu in the Infotainment system:

will be switched off temporarily and only the turn

signal will Ĕash on the relevant side of the vehicle.

Or:

One-sided parking light

The one-sided parking light allows one side of the

parked vehicle to be illuminated through activation

Headlamp levelling, LED headlights

of the corresponding sidelights.

› In Infotainment, select the following menu:

Switch on the side-

lights on the right

Or:

Switch on the side-

lights on the left

› Adjust the headlight range using the slider. The

› Switch off the ignition.

headlight range must correspond to the vehicle's

› Move the lever to the

load.

appropriate position.

Front seats occupied, boot empty

› Lock the vehicle.

All seats occupied, boot empty

When the parking light is

All seats occupied, boot loaded

switched on, an acoustic

Driver's seat occupied, boot loaded

warning signal sounds and the driver's door is

opened. After a few seconds or after the driver's

In the event of another vehicle loading condition, the

door is closed, the warning signal will stop.

positions ,

can be used.

For the Full LED headlights, the headlight range

control is adjusted automatically.

Была ли эта страница вам полезна?

Да!Нет

4 посетителя считают эту страницу полезной.

Skoda Superb iV (2021 year). Manual in english — page 2

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.