Skoda Superb iV (2021 year). Manual in english — page 5

Infotainment Amundsen › Voice control

› Tap or repeatedly tap the Ĕa£ symbol until the

Requirement for recognition of the activation

desired language keypad is displayed.

command

✓ Activated menu item

Voice control Active

Further character variants

› Press and hold the sign with the symbol

› Select the desired symbol.

Operation

Switch on voice control

Setting up additional keyboard languages

› Press the

button on the multifunction steering

wheel.

› Tap

Additional keypad languages.

Or:

› Say the activation command “OK Laura”.

Voice control

After switching on, the icon is displayed in the sta-

tus bar.

Functionality

Enter voice command

Voice control principle

› Speak a voice command with voice control switch-

Voice control works according to the principle of

ed on.

dialogue between the user and the Infotainment sys-

tem.

During recognition of the voice command, the icon

is displayed.

The user says a voice command. The Infotainment

system responds or executes the voice command.

The Infotainment system then executes the voice

command or plays the message. During the message,

Advanced voice control

the icon is displayed.

The vehicle's advanced voice control enables the ve-

After the execution of the voice command, voice

hicle functions to be searched and operated online.

control is switched off.

Advanced voice control understands ĔueÄt whole

sentences. You do not need to use set commands or

Correcting a voice command

phrases.

› During voice command input, press the

button

on the multifunction steering wheel and say a new

The advanced voice control can, for example, search

voice command.

for special destinations or dictate SMS messages if

the connected telephone makes this possible.

Stopping voice control

This function allows you to combine the search in

Stopping leaves more time for voice command input,

the online and offliÄe data of the Infotainment. The

e.g. for searching for a phone contact.

transition between online and offliÄe search is seam-

› Move your fiÄ£eÙ up or down over the Infotain-

less and imperceptible to the user.

ment screen.

Or:

Operating conditions

› Say the voice command “pause”.

✓ Ignition on

Resuming stopped voice control

› Press the

button on the multifunction steering

✓ Infotainment switched on

wheel.

Operating conditions for advanced voice control

Or:

To use the advanced voice control, the following

conditions must also be met:

› Tap on in the Infotainment screen.

✓ The vehicle supports the function.

Stopping the played back message

✓ The vehicle has Infotainment and functions that

› Press the

button on the multifunction steering

can be controlled by the advanced voice control.

wheel.

✓ The ŠKODA Connect services are active.

Ending voice control

✓ The vehicle is within range of a contractual mo-

› Press the

button on the multifunction steering

bile network, through which the connection to

wheel twice.

ŠKODA Connect Services is ensured.

Or:

✓ The level of protection of personal data is set to

Share my position .

› Say the voice command “cancel” during voice com-

mand input.

Infotainment Amundsen › Control Centre

Restriction

› Wait 5 seconds.

For some Infotainment languages, there is no voice

Control Centre

control available. The Infotainment system will indi-

The Infotainment control centre can be used for

cate this.

quick access to the following functions:

The messages are generated by Infotainment. Flaw-

less clarity (e.g. road or city name) cannot always be

guaranteed.

You cannot use voice control while a phone call is in

progress.

Settings

The following voice control functions are set in the

menu

Voice control:

Display and administration of functional surfaces

▶ oÄfiÙmatioÄ tones

of preferred features

▶ Enable/disable use of the activation word.

Display list of informational messages

Preferred functions

Self help

Display user account management

Setting the personal data protection level

Starting acoustic help

› If the Infotainment system is expecting a voice

Setting the instrument and key illumination

command, say “Help”.

The “Help” voice command can be issued repeatedly

for further tips on voice control.

Set functional areas of preferred features

Displaying the help

› To display editing mode hold any function surface

› Tap on

of the preferred feature.

Or:

› To add the preferred feature, move the desired

feature from the top of the screen to the function-

› If Infotainment is expecting a voice command, say

al surface at the bottom of the screen.

“Overview”.

› To close edit mode, tap on .

Switch example voice commands display on / off

The system offeÙs the option of displaying example

voice commands after switching on the voice con-

Radio

trol in the Infotainment screen.

Overview

› To turn

voice control oÄ/off, tap Show in Info-

tainment system.

Display menu

› Tap

Or:

Control Centre

› Tap

Overview

Analogue and digital radio player

Display of the control centre

› A Tap and select the desired frequency range.

› Press the bar at the

› Tap and search for or select the desired station.

top of the screen and

› Tap on

drag down.

Closing the control centre

› Tap on

Or:

Infotainment Amundsen › Radio

Show favourites

Information about the programme as well as the

broadcast content of the web radio

Settings

Podcast player

›

Tap A and select an online radio station.

› Tap and search for or select the desired pocast.

› Tap

Select source

Station name

Information about the broadcast content

Station logos

List of available stations

Show favourites

Information about the station

Search stations manually (valid for AM and FM)

Select source

Settings

Podcast name

List of available analogue and digital radio stations

Information about the broadcast content

› Tap on

Podcast logo with the symbol

Played station

Station stored on the presets

Tap: Start playback

A tÙaffi radio station is set

Tap: Pause

The DAB transmitter emits images which are

Tap: Go back 15 secs

displayed in the information to the station

Manual update of the station list

Tap: Go forward 15 secs

In the station list, information about the programme

View episodes of the podcast being played

type and the channel ideÄtifiatioÄ of the regional

List of web radio stations and podcasts

channel can be displayed.

Show favourites

Web radio player

Show information about the podcast

› A tap and select a web radio station.

Settings

› Tap and search or select web radio.

› Tap on

List of web radio stations and podcasts

› Tap on

Select source

Station name

Search for web radio stations and podcasts

Information about the broadcast content

Recently played web radio stations and podcasts

Station logos

100 most popular web radio stations depending

on the Infotainment language that has been set

List of web radio and podcasts

Go to podcasts and select

Infotainment Amundsen › Radio

Search for and select web radio stations and pod-

› To display the functional surface for the FM sta-

casts based on the selected country

tion, turn on menu item

Advanced settings Station dis-

play: FM switch on

Search for and select web radio stations and pod-

casts based on the selected language

› In the Radio main menu, tap

Search for and select web radio stations and pod-

› To search in sequence, tap or next to the dis-

casts based on the selected genre

played frequency range scale.

See list of related podcasts based on content lis-

Or:

tened to

› Hold down the scroll mark on the frequency range

See list of related podcasts based on content lis-

scale and move it to the desired value.

tened to

The podcasts are shown in the displayed lists

Limitation

with the icon .

▶ Infotainment supports digital radio reception in

List of favourite stations and podcasts

DAB and DAB+ formats.

› In the menu Radio, tap on

▶ Car parks, tunnels, tall buildings or mountains can

restrict radio reception.

▶ In the rear side windows, there are antennas for re-

ceiving the radio signal.

Covering the panes with foils or metal-coated la-

bels may affet the reception of the radio signal.

▶ The ŠKODA AUTO company assumes no responsi-

bility for the availability, correct functioning and

broadcast information of the RDS service.

Select source

Settings

Radio text

Save the station currently being listened to as a fa-

Station buttons for favourite stations and pod-

vourite from the Radio main menu

casts

› Hold the desired station key for preferred stations

until the station is stored.

Save station to favourites from the list of available

Operation

stations

Applies to AM, FM and DAB frequency ranges.

Select station

› Hold the line with the name of the desired station.

› Tap the desired preset button.

Save channels from the list of web radio stations

and podcasts

Valid for web radio stations and podcasts

› Select a web radio station as the playback source.

› Tap on

› Go to the desired web radio station or podcast and

select it.

› Tap or at the top of the screen.

› Hold the line with the name of the desired station

or podcast.

SCAN function

› Tap the desired preset button.

The function plays receivable stations of the selec-

With podcasts, it is not possible to save the indi-

ted frequency range in succession for a few seconds

vidual episodes.

each.

› To start automatic play

, tap Scan.

Deleting favourites

› To stop automatic play, tap

› In the menu Radio

Delete memory entries .

Find stations manually

Manual search is available for AM and FM stations.

Infotainment Amundsen › Radio

› To delete a station button for preferred stations,

about the content broadcast from the station to

tap the desired station button and oÄfiÙm the de-

which you are listening.

letion.

› In the menu Radio

Radio text .

› To delete all station buttons for preferred stations

Regional FM station logo

Clear all and oÄfiÙm the deletion.

Applies to the FM frequency range.

Functional surfaces for analogue and digital ra-

Infotainment provides the option of using ouÄtÙû-

dios

speifi FM station logos.

Applies to AM, FM and DAB frequency ranges.

› In the menu Radio

Advanced settings Region for station

The variant for changing stations using the function

logo: .

surface in the Radio menu is set as follows:

› Choose country.

› In the menu Radio

Arrow buttons: .

Switching additional announcements of the DAB

› Select the variant for switching between the sta-

transmitter on / off

tions stored on the station buttons or the stations

Applies to the DAB frequency range.

stored in the list of available stations.

When the function is switched on, other announce-

Functional areas for web radio stations and

ments are received as tÙaffi announcements. These

podcasts

include e.g. weather news, sports reports, fiÄaÄial

Applies to web radio stations and podcasts.

news etc.

The variant for changing stations using the function

› In the menu Radio

Advanced settings Tap Additional DAB

surface in the Radio menu is set as follows:

announcements .

› In the menu Radio

Arrow buttons: .

Switch RDS oÄ/off

› Select the variant for switching between the sta-

Applies to the FM frequency range.

tions stored on the station keys or the last web

The menu item is only available for some countries.

stations and podcasts listened to.

› In the menu Radio

Advanced settings Radio Radio Data

Switch traffic reception (TP) for stations oÄ/off

System (RDS) .

Applies to FM and DAB frequency range.

If the RDS function is disabled, the following menu

› In the menu Radio

Traffic program (TP) .

items in FM station settings are not available:

Assign station logo from the Infotainment memory

▶ TÙaffi program (TP)

Applies to the FM and DAB frequency ranges.

▶ Radio text

Infotainment offeÙs the option of assigning logos,

▶ RDS Regional

which are stored in the Infotainment memory, to the

▶ Automatic frequency change (AF)

stations.

▶ Regional station logo.

› In the menu Radio

Station logos .

Switch automatic switching to a similar DAB trans-

› Select the desired station and logo.

mitter on / off

Switching off the station logo display

Applies to the DAB frequency range.

Applies to the FM and DAB frequency ranges.

When the function is switched on and there is signal

› In the menu Radio

Station logos .

loss from the DAB station being listened to, Infotain-

› To select the desired station. No station logo .

ment automatically sets another DAB station with

similar content.

Activating / deactivating automatic station logo

› In the menu Radio

Advanced settings Tap Switch to a simi-

assignment

lar station if weak reception .

Applies to the FM and DAB frequency ranges.

When the function is switched on, a station logo

Displaying FM / DAB stations or FM stations in the

from the Infotainment memory is assigned when the

list of available stations

station is stored on a preset.

Applies to the FM and DAB frequency ranges.

› In the menu Radio

Advanced settings Tap Automatic selec-

Depending on the following setting, the stations of

tion of station logos .

the selected frequency range are displayed in the list

of available stations.

Turn oÄ/off radio text reception

› In the menu Radio

Advanced settings Station display: .

Applies to the FM and DAB frequency ranges.

› Select one of the following menu items:

When the function is switched on and the station

buttons are displayed, you can see more information

▶ FM/DAB - the list shows available FM and DAB sta-

tions.

Infotainment Amundsen › Media

▶ FM

- the list shows available FM stations.

Details about the track being played

Sound quality of web radio stations and podcasts

Settings

Applies to web radio stations and podcasts.

Video player

› To adjust the sound quality, in the Radio menu tap

Audio quality: .

› Choose low or high quality.

The quality you set affets the amount of data used

in the data connection.

Quality also depends on the speed and availability of

the data connection.

If playback failure occur, reduce the sound quali-

ty.

Select source

Media

Manage files / multimedia database

What you should be mindful of

Show favourites

Show video

▶ Do not save any important data or that which has

not been backed up on the connected audio sour-

Shrink image display

ces. ŠKODA assumes no responsibility for lost or

Enlarge the image display

damaged files or connected audio sources.

Settings

▶ When changing or connecting an audio source, this

may cause sudden changes in volume. Reduce the

volume before changing or connecting an audio

source.

Player controls

▶ When connecting an audio source, the source in-

Operation - Basics

formation messages can be displayed. These mes-

sages must be observed and, if necessary, con-

fiÙmed.

▶ The national copyright laws that apply in your

country must be observed.

Overview

Display menu

› Tap

Or:

Album image / symbol of the connected source

› Tap

▶ Tap: list available albums

Music player

Tap: Start playback

Tap: Pause

Within 3 seconds of starting playback, tap: play

the previous song

After 3 seconds from the start of playback, tap:

to play the current title from the beginning

Hold: fast rewind within the track

Tap: play the next track

Hold: fast forward within the track

Choose source

Movement within the title is also possible by drag-

ging the fiÄ£eÙ over the timeline.

Manage files / multimedia database

Show favourites

Infotainment Amundsen › Media

Advanced operation

› To save, hold the desired functional area for fa-

Turn on / off repeat playback of the current

vourites A .

track

› Choose one of the available list entries B .

Turn on / off repeat playback of the current al-

bum / folder

› To Clear, in the menu media

tap on Manage favour-

Turn on / off random playback of the current al-

ites .

bum / folder

› To delete a favourite, tap on the list entry and con-

Save the played track in the “My playlist” playlist

fiÙm the deletion.

“My playlist” management

Or:

▶ To display the playlist, tap

› To delete all favourites tap on Clear all and oÄfiÙm

▶ To manage the playlist tap in the displayed play-

the deletion.

list.

Traffic

The following activities can be carried out in playlist

› To turn oÄ/off tÙaffi monitoring during playback

management:

of media files, go to the Media in the main menu

▶ Control playback.

and tap on Traffic program (TP) .

▶ Change the order of a title in the list by holding and

moving to the desired position.

▶ Delete title.

Restriction

The availability of some media operation functions is

dependent on the connected source and the soft-

ware being used, e.g. Bluetooth®.

Settings

Manage favourites

Supported sources and files

Infotainment Amundsen › Media

Supported sources

Source

Interface

Type

SpeifiatioÄ

File system

USB stick

HDD

(without special

software)

MSC

USB devices that

use the USB mass

VFAT

storage support

FAT16

protocol

FAT32

USB 1.x; 2.x 3.x

Devices running

exFAT

USB

or higher with USB

the Android or

NTFS

2.x support

Windows Phone

MTP

operating system

that support the

Media Transfer

Protocol

Devices with the

iOS operating sys-

Apple

HFS+

tem and the iAP2

protocol

Bluetooth® proto-

cols

Bluetooth® player

Bluetooth®

A2DP and AVRCP

(1.0

- 1.6)

Compatibility of mobile devices

It is possible to check the ŠKODAweb pages to see if Infotainment is compatible with the selected mobile

device being tested. This check is carried out by using the following reference or by reading the QR code:

http://go.skoda.eu/compatibility

All information given is incidental and serves as information.

The ŠKODA AUTO company cannot guarantee full functionality and compatibility, e.g. due to a software up-

date of the Infotainment and the mobile devices.

Supported audio files

Compression for-

Codec type

File exten-

Max. bit rate

Max. sam-

Multi channels

mat

sion

[kbps]

pling rate

[kHz]

MPEG 1 Layer 2

32 - 384

32, 44, 48

Mono, stereo,

mp2

MPEG 2 Layer 2

8 - 160

16, 22, 24

Joint stereo

MPEG

MPEG 1 Layer 3

32 - 320

32, 44, 48

Mono, dual mono,

MPEG 2 Layer 3

mp3

16, 22, 24

Stereo, Joint

8 - 160

MPEG 2.5 Layer 3

8, 11, 12

Stereo

Infotainment Amundsen › Media

Compression for-

Codec type

File exten-

Max. bit rate

Max. sam-

Multi channels

mat

sion

[kbps]

pling rate

[kHz]

Windows Media

8, 16, 22, 32,

6 - 192

Audio 7

44, 48, 96

Windows Media

8 - 384

Audio 8

8, 11, 16, 22,

Windows Media

Mono, stereo,

WMA

wma

8 - 768

32, 44, 48,

Audio 9 and 9.1

Joint stereo

Windows Media

8 - 320

Audio 9.2

Windows Media

32, 44, 48,

32 - 768

Audio 10

22, 24, 32,

AAC LC

44, 48

ADTS

aac

16 - 2048

Stereo

AAC HE

16, 22, 24,

AAC HEv2

32, 44, 48

22, 24, 32,

M4A LC

16 - 400

44, 48

MP4

m4a

Stereo

M4A HE

16, 22, 24,

M4A HEv2

16 - 64

32, 44, 48

8, 11, 12, 16,

Mono,

OGG

OGG-Vorbis

ogg

8 - 576

22, 24, 32,

Stereo

44, 48, 96

8, 11, 12, 16,

22, 24, 32,

Mono, stereo,

FLAC

Ĕa

44, 48, 64,

Joint stereo

88, 96, 192

8, 11, 12, 16,

Mono,

RIFF

WAV

wav

64 - 3072

22, 24, 32,

Stereo

44, 48, 96

Monkey's

ape

8 - 192

8, 11, 12, 16,

Mono, stereo,

SBC

Bluetooth A2DP

8 - 345

22, 24, 32,

Joint stereo

44, 48

Mono, stereo,

OPUS

opus

6 - 2000

8 - 48

Multichannel

Files that are protected by DRM- and iTunes® methods are not supported by Infotainment.

Supported video files

Codec type

File extension

Max. recordings per second bit rate

[Mbit/s]

mpg

mpeg

MPEG 1

1.5

m1v

mPV

mpg

mpeg

MPEG 2

m2v

MPEG 4 (H.264)

m4p

MPJEG

mp4

m4v

MPEG 4 (ISO)

mp4v

mov

Xvid

100 Infotainment Amundsen › Images

Codec type

File extension

Max. recordings per second bit rate

[Mbit/s]

wmv

WMV9

asf

Supported playlists

Codec type

File extension

M3U

m3u

M3U8

m3u8

PLS

pls

WPL

wpl

ASX

asx

Images

▶ Stop slideshow

View image

Overview

▶ Turn left

Display menu

▶ Turn right

› Tap

▶ Show in output size

Image viewer

Gesture control

▶ Display of the next im-

age

▶ Display the previous

image

Select source

Manage files

Settings

▶ Increase the image size

Operation

Operation using functional areas

▶ Reduce the image size

View images

▶ Show the next image

▶ Show the previous image

▶ Start slideshow

Infotainment Amundsen › Mobile device management 101

▶

Rotate by 90 °

› Use only media carriers, Bluetooth® devices, and

mobile devices that contain no harmful data or

malware.

› Regularly update the software provided by ŠKODA

AUTO.

We recommend having the system software and

components updated by a specialist company.

WARNING

Settings

Risk of an accident!

Malware in the vehicle can iÄĔueÄe and deactivate

The following Infotainment functions are set in the

certain vehicle functions, or take over the controls of

menu:

these where applicable.

▶ Display image size

▶ If the vehicle reacts in an unusual way, immediately

▶ Display image duration during the slideshow

reduce speed or stop the vehicle.

▶ Slideshow repeat

▶ Seek the help of a specialist garage.

WARNING

Malware in the vehicle may gain unauthorised access

Supported sources and files

to the information and data of the vehicle, and on oc-

Supported sources

casion, to connected mobile devices.

Source

Interface

Speifia-

File system

tioÄ

Overview

USB 1.x; 2.x

USB stick

VFAT

3.x

HDD

FAT16

Using mobile device management, devices can be

USB

or higher

(without

FAT32

connected, disconnected, and interchanged.

with USB

special

exFAT

Display mobile device management

2.x support

software)

NTFS

› Tap on

Manage mobile devices.

Supported files

Codec type

File extension

Max. resolution

[Mpx]

BMP

bmp

JPG; JPEG

jpg; jpeg

4 (Progressive

Mode)

GIF

gif

PNG

png

The maximum supported image size is 20 MB.

The device enables a connection via the Blue-

tooth®“hands-free pÙofile”

The device is connected via the Blue-

Mobile device management

tooth®“hands-free pÙofile”

Cybernetic security

The device enables a connection via the Blue-

tooth® audio pÙofile

Your vehicle contains components that are used to

The device is connected via the Bluetooth® audio

exchange information and data between the vehicle

pÙofile

and the connected mobile devices or the Internet.

Remove the device from the list previously con-

nected devices

These components have security mechanisms that

The device enables a SmartLinkconnection to be

minimise the risk of unauthorised access to the vehi-

cle systems.

made via Android Auto

The device enables a SmartLinkconnection to be

Regular software updates help reduce the risk of un-

made via Apple CarPlay

authorised access to vehicle systems and vehicle

The device enables a SmartLinkconnection to be

functions. The following guidelines must therefore

made via MirrorLink

be observed:

Connected / Previously connected devices

Available devices

102 Infotainment Amundsen › Telephone

Limitations of mobile devices and applications

Connection set-up

Availability of features

Connect a mobile device to Infotainment

The availability of certain features depends on the

› Find available Bluetooth® devices in the mobile de-

type of mobile device, as well as that of the applica-

vice.

tions installed.

› Select the Infotainment Bluetooth® unit.

Compatibility of mobile devices

The unit name can be determined by tapping

It is possible to check the ŠKODAweb pages to see if

Manage mobile devices

device name:.

Infotainment is compatible with the selected mobile

› oÄfiÙm the PIN; enter it if necessary and then

device being tested. This check is carried out by us-

oÄfiÙm.

ing the following reference or by reading the QR

code:

Connect Infotainment to a non-paired mobile de-

vice

http://go.skoda.eu/compatibility

›

Manage mobile devices .

› Select the desired device from the list of available

devices.

› Select the desired Bluetooth® pÙofile.

› oÄfiÙm the PIN; enter it if necessary and then

All information given is incidental and serves as in-

oÄfiÙm.

formation.

› If two devices are connected to the Infotainment,

The ŠKODA AUTO company cannot guarantee full

select the device to be replaced.

functionality and compatibility, e.g. due to a software

Connect Infotainment to a previously connected

update of the Infotainment and the mobile devices.

mobile device

Bluetooth® compatibility of mobile devices

›

Manage mobile devices .

Due to the large number of mobile devices, it is not

Or:

possible to guarantee total Bluetooth® compatibility

with Infotainment. Bluetooth® compatibility depends

›

Select mobile phone .

on the Bluetooth® version as well as the implementa-

› Select the desired device from the list of previous-

tion of Bluetooth® protocols by the manufacturer of

ly connected devices.

the mobile device.

› Select the desired Bluetooth® pÙofile.

Applications in mobile devices

› If two devices are connected to the Infotainment,

select the device to be replaced.

Mobile devices can be used to install applications

that allow you to view additional information on the

SmartLink connection

Infotainment screen, or to operate the Infotainment

Infotainment provides the ability to connect Smar-

system.

tLink to compatible mobile devices using the follow-

Due to the variety of applications, as well as their on-

ing connection types:

going development, the available applications may

Android Auto

not function on all mobile devices. ŠKODA AUTO as-

Apple CarPlay

sumes no liability for their proper functioning.

MirrorLink

The scope of available applications and their func-

Mobile devices can be connected to the Infotain-

tionality is dependent on the type of Infotainment, as

ment via USB cable or Wi-Fi, as long as the mobile

well as the vehicle and country.

device supports it.

Information about ŠKODAapplications

› Connect the mobile device to the Infotainment via

Detailed information about ŠKODA applications can

a USB cable or browse and connect to a wireless

be found on the website after reading the following

network.

QR code or link:

› Tap the icon of the supported connection.

http://go.skoda.eu/mobile-apps

Telephone

Overview

Display menu

› Tap

Or:

Infotainment Amundsen › Telephone

103

› Tap

If, for example, the digits 32 are entered, contacts

with the letter sequence DA, FA, EB etc. are dis-

If the menu phone is not displayed, check wheth-

played next to the numeric keypad.

er the mobile device is connected.

List of telephone contacts

The list of telephone contacts is imported from the

connected main telephone.

› To display the contact list in the phone menu, tap

› To search within the list, tap on Enter contact .

› Enter the details you wish to fiÄd.

› To establish a connection with a contact, tap the

functional area showing the desired contact.

If a contact has multiple telephone numbers, select

Name of the connected telephone

the telephone number from the displayed list.

▶ Tap: Show list of previously connected phones

› To display the details for a contact, tap .

Name of telephone service providers

▶ If the symbol is displayed in front of the name,

Establish a connection to the voice mailbox num-

roaming is active.

ber

› In the Phone menu, tap on

Preset buttons for preferred contacts

Change the main telephone with the additional

Telephone conversation

telephone

Depending on the context of the telephone conver-

sation, the following functions can be selected:

Enter telephone number

End connection / reject incoming call / end call

Contact list

Answer an incoming call / return to the held call

Text messages / emails

Switch the ringer off / on

Hold a call

Call lists

Switch the microphone off / on

Settings

Show details of the caller

Reject an incoming call using an SMS message

Answer a call from the second telephone during

Conditions for connecting a telephone with

a call on the fiÙst telephone

Infotainment

The ongoing call on the fiÙst telephone is termi-

nated by accepting the call.

✓ The Bluetooth® function of the Infotainment and

the telephone needs to be switched on.

› To switch the call tone from the speakers to the

telephone, go to telephone in the menu and tap on

The Bluetooth® function of the Infotainment is

speakerphone .

switched on in the menu item

Manage mo-

bile devices

Bluetooth.

› To switch the call tone from the telephone to the

speakers, tap

✓ Visibility of the Infotainment is switched on.

The visibility of the Infotainment is switched on in

Conference call

the menu item

Manage mobile devices

A conference call is a joint telephone conversation

Visibility.

with a minimum of three and a maximum of six par-

ticipants.

✓ The telephone is within signal range of the Info-

tainment's Bluetooth® unit.

› Make the next call during an ongoing conversation/

✓ The telephone is compatible with Infotainment.

conference.

Or:

Telephone operation

› Accept a new incoming call by tapping

›

To start a conference call, tap

Enter telephone number

During an ongoing conference call, the following

› In the Phone menu, tap on .

functions can be selected depending on the context:

› Enter the telephone number using the numeric

Hold the conference call and leave temporarily

keypad that is displayed.

(the conference will continue in the background)

The displayed numeric keypad can also be used

Return to the held conference call

for searching for contacts.

104 Infotainment Amundsen › Telephone

Switch the microphone off / on

› Select the desired e-mail.

End conference call

› To switch graphic ÄotificatioÄs regarding the re-

Show details of the conference call

ceipt of a new email on or off, tap in the Phone

In the details of the conference call, depending on

menu New message notifications .

the connected telephone, the following functions

can be selected:

Show details of the conference call partici-

Settings for Infotainment telephone functions

pants

Telephone-Infotainment-Connection types

End conversation with the conference call par-

The way in which the telephone is connected de-

ticipant

pends on the number of phones currently connected

Conversation with a participant outside of the

to the Infotainment:

conference call

▶ No telephone - The telephone is connected as a

Send a text message

main telephone.

› In the Telephone

menu, tap Messages

New

▶ One telephone - The telephone is connected as an

SMS .

additional telephone.

› Write a text message and oÄfiÙm; a view of the

▶ Two telephones - Select the telephone to be re-

message is displayed.

placed.

The message can be edited when the text area

› To switch between the main telephone and the

within the view is tapped.

additional telephone, tap on in the Phone menu.

› Search for or select the recipient of the message.

Connect the telephone to Infotainment

› Add more recipients or oÄfiÙm selected recipi-

› Find available Bluetooth® devices on the phone.

ents.

› Select the Infotainment Bluetooth® unit.

› Tap on Send .

The unit name can be determined by the menu

Display received text messages

item

Manage mobile devices

Device name:.

› In the Telephone

menu, tap Messages

› oÄfiÙm the PIN; enter it if necessary and then

oÄfiÙm.

› Messages that are received are displayed as indi-

Connect Infotainment to a non-paired telephone -

vidual messages or as messages in a conversation,

no telephone is connected

depending on the following setting.

› Tap on

To switch the display of messages in a conversa-

Or:

tion on or off, tap in the Phone

menuShow messag-

es as conversation .

› Tap on

› Follow the instructions in the Infotainment screen.

› To switch graphic ÄotificatioÄs regarding the re-

ceipt of a new message on or off, tap in the Phone

Connecting Infotainment to a non-paired tele-

menu New message notifications .

phone - another telephone is connected

Infotainment offeÙs the possibility to read the

› Tap on

Manage mobile devices.

text message (context-dependent) by means of the

› Select the desired device from the list of available

generated Infotainment voice if is tapped.

devices.

› Select the desired Bluetooth® pÙofile.

Send e-mails

› oÄfiÙm the PIN; enter it if necessary and then

› In the Telephone

menu, tap Emails

New

oÄfiÙm.

emails .

› Write an e-mail and oÄfiÙm that an e-mail is dis-

The telephone is connected as an additional tele-

played.

phone.

The text can be edited when the text area within

Or:

the view is tapped.

› If two telephones are connected to the Infotain-

› Search for or select the recipient of the email.

ment, select the telephone to be replaced.

› Add more recipients or oÄfiÙm selected recipi-

Connect Infotainment to a previously paired tele-

ents.

phone

› Enter the subject of the e-mail.

›

Manage mobile devices .

› Tap on Send .

Or:

Show received e-mails

› In the Telephone

menu, tap Emails

Infotainment Amundsen › Wi-Fi 105

Select mobile phone .

› For setting the Infotainment ringtone in the

› Select the desired device from the list of previous-

phone menu select the ringtone .

ly connected devices.

› Select the ringtone.

The telephone is connected as an additional tele-

Number for the voice mailbox

phone.

› For setting the voice mailbox number in the

phone

menu Mailbox number: .

Or:

› Enter the voice mailbox number.

› If two telephones are connected to the Infotain-

ment, select the telephone to be replaced.

Turn the graphic notice regarding receiving a new

message/email on or off

Manage preset buttons for preferred contacts

When the feature is on, the new message icon ap-

pears on the status bar and in the feature area for

the messages when a new message/e-mail is re-

ceived.

› In the Telephone

menu New message notifications .

Simultaneous calls

This applies to some countries.

Depending on the connected telephone, it is possible

to answer the next incoming call and hold the previ-

ous call.

› To save the desired preset button, hold A .

› To switch on simultaneous calls, tap on telephone

› Select a contact from the displayed list.

Parallel talks.

› If the contact contains multiple telephone num-

bers, choose the desired telephone number.

Wi-Fi

› To display the menu for deletion, go to the phone

menu and tap on Manage favourites .

Functionality

› To delete one preset, tap on the list entry and con-

The Wi-Fi can be used for the internet connection or

fiÙm the deletion.

for the SmartLinkConnection.

Or:

The Infotainment hotspot can connect up to 8 mo-

› To delete all station buttons, tap Clear all and oÄfiÙm

bile devices. At the same time, the Infotainment can

the deletion.

be connected to another hotspot.

Import telephone contacts

› To display the list of connected mobile devices, tap

After fiÙst connecting the main telephone with Info-

Wi-Fi Infotainment system as hotspot Connected devi-

tainment, telephone contacts will start to be impor-

ces.

ted into the Infotainment memory.

Infotainment can import up to 5000 telephone con-

Overview of available hotspots

tacts together with contact pictures. Each contact

can include max. 5 telephone numbers.

Display available hotspots

Depending on the type of telephone, import oÄfiÙ-

› Tap

Wi-Fi Wi-Fi:.

matioÄ may be required.

Update telephone contacts

When re-connecting the telephone with Infotain-

ment, an automatic update of the list is carried out.

› For manual update of the list in the phone

menu tap on Import contacts .

Sort contacts in the phone book

› In the Telephone

menu Sort by: Tap and select the

sorting type.

Ringtone

Previously connected hotspots

Some phones do not allow the use of the telephone

Available hotspots

ringtone; instead, the Infotainment ringtone is used.

The hotspot supports the WPS connection

106 Infotainment Amundsen › Wi-Fi

Currently connected hotspot

Activate/deactivate data transfer between the In-

fotainment and the connected device

Delete information about the hotspot connection

› To turn data transmission on or off, tap

Wi-Fi signal strength of the hotspot

Wi-Fi Infotainment system as hotspot Connected devices

The Wi-Fi signal from the hotspot is not available

Change the name of the Infotainment hotspot

▶ Tap

Wi-Fi Infotainment system as hotspot Network

name:.

Function restriction

▶ Enter the name and oÄfiÙm.

The Infotainment system can only be connected to a

Change password for connection to Infotainment

hotspot with WPA2 access protection.

hotspot

The password must be a minimum of 12 and a maxi-

Restriction of the Wi-Fi connection

mum of 63 characters.

In some countries, the Wi-Fi connection is restric-

ted for legal reasons. When crossing the border of

▶

Wi-Fi Infotainment system as a hotspot Network key .

the country in question, the connection with a mo-

▶ Enter and oÄfiÙm the password.

bile device connected via Wi-Fi can be ended or

restricted.

Quick connection of Infotainment to the mobile

device hotspot

Find out about ouÄtÙû-speifi legal restrictions.

› On the mobile device, turn on the hotspot, its visi-

If necessary, switch off the Wi-Fi manually.

bility, and the option for WPS connection.

›

Wi-Fi Wi-Fi: Tap WPS quick connection (WPS button).

Settings

Automatic WPS connection

› Tap

Wi-Fi Quick connection to Infotainment system.

Connect a mobile device to the Infotainment hot-

spot

› In the mobile device, switch on the option for con-

nection via WPS.

› Turn on the Infotainment’s Wi-Fi hotspot in the

menu item

Wi-Fi Infotainment system as hotspot

› Wait for the connection to be established and, if

Use as hotspot.

necessary, oÄfiÙm the respective messages.

› Turn on the Wi-Fi on the mobile device.

Manual WPS connection

› In the list of available Wi-Fi devices, look for Info-

› In the mobile device, switch on the option for con-

tainment Wi-Fi.

nection via WPS PIN.

The name of the Infotainment is taken from the

The mobile device display will show the WPS PIN

menu item

Wi-Fi Infotainment system as hotspot

for connecting to the Infotainment.

Network name:.

› Tap

Wi-Fi Quick connection to Infotainment system

› Select the Infotainment hotspot and enter the re-

WPS PIN.

quired password.

› Enter the WPS PIN in the Infotainment and con-

The password for connecting to the Infotainment

fiÙm.

hotspot is taken from the menu item

Wi-

› Wait for the connection to be established and, if

Fi Infotainment system as hotspot Network key.

necessary, oÄfiÙm the respective messages.

› oÄfiÙm the connection.

Automatic connection using the QR code

Connect Infotainment to the mobile device hot-

›

Wi-Fi Tap quick connection with infotainment system .

spot

› In the mobile device, switch on the option for con-

› Turn on the Infotainment’s Wi-Fi unit in the menu

nection via QR Code.

item

Wi-Fi WLAN: WiFi active switch on

› With the mobile device, read the QR code dis-

› Select the desired hotspot in the list of available

played on the Infotainment screen.

hotspots.

› Wait for the connection to be established and, if

› Enter the password for connecting to mobile devi-

necessary, oÄfiÙm the respective messages.

ces.

Tips for a perfect connection

Infotainment stores passwords for previously

connected hotspots.

▶ Keep only the hotspot to be connected switched

on and switch off the other hotspots.

Security level of the Infotainment hotspot

The security level is set at WPA2 and cannot be

▶ Delete unused hotspots. This shortens the time re-

changed.

quired to establish a connection.

▶ For some hotspots, the connection takes longer, so

wait for the connection to fiÄish.

Infotainment Amundsen › SmartLink 107

▶

If the connection is interrupted, recheck the availa-

Android Auto

ble hotspots and repeat the connection.

SmartLink

Functionality

SmartLink offeÙs the ability to display and operate

eÙtified applications from a connected mobile de-

vice in the Infotainment screen.

eÙtifiatioÄ may be conditional upon the use of the

Overview of running applications, phone calls, in-

latest update to the particular SmartLink application.

coming text messages, and more.

Applications include, for example, apps for route

Turn on voice control (Google Voice)

guidance, telephoning, listening to music, etc.

Mobile devices can be connected via a USB cable or

Apple CarPlay

WiFi.

Supported connection types

SmartLink supports the following connection types:

▶ Android Auto

▶ Apple CarPlay

▶ MirrorLink

Overview of the SmartLink connection

List of available applications

Menu SmartLink

› Tap

Depending on the duration of operation:

▶ Tap: Return to the menu Apple CarPlay

▶ Hold: Turn on voice control (Siri)

MirrorLink

Previously connected device

Currently connection device

Display information about SmartLink

Disconnection of the active connection

It is not possible to operate the application while

driving

Disconnection of the active connection

Return to the menu SmartLink

Settings in SmartLink menu

List of running applications

Display of the last running application in connec-

ted mobile devices

Settings

108 Infotainment Amundsen › SmartLink

Connection conditions

Restriction

General connection conditions

Restriction of the Wi-Fi connection

✓ The mobile device supports the type of Smar-

In some countries, the Wi-Fi connection is restric-

tLink connection Android Auto, Apple CarPlay or

ted for legal reasons. When crossing the border of

MirrorLink.

the country in question, the connection with a mo-

✓ Mobile devices, as well as the type of SmartLink

bile device connected via Wi-Fi can be ended or

connection, are supported in the respective mar-

restricted.

ket.

Find out about ouÄtÙû-speifi legal restrictions.

✓ Some connected mobile devices require the mo-

If necessary, switch off the Wi-Fi manually.

bile device to be “unlocked”.

Restriction of SmartLink applications while driving

Conditions for Android Auto

For reasons of safety, the operation of some Smar-

✓ The device to be connected must have Android

tLink applications while driving is not possible or only

Auto connection.

limited.

A list of devices, supported regions and applica-

Restriction of the navigation function

tions that support the Android Auto connection

If route guidance is currently being carried out

can be found on the Google, Inc. website.

through Infotainment, this is ended when you start

✓ The Android Auto application needs to be instal-

route guidance in the Apple CarPlay application.

led on the mobile device.

If there is route guidance in the Apple CarPlay appli-

✓ Some applications require the data connection in

cation, it is ended by starting the destination guid-

the mobile device to be turned on.

ance using Infotainment.

✓ Connect the mobile device for the fiÙst time

when the vehicle is stationary.

SmartLink settings

Conditions for Apple CarPlay

✓ The device to be connected must have Apple

Apple CarPlay - Connection via USB

CarPlay connection.

› Turn on the Infotainment.

A list of devices, supported regions and applica-

› Turn on the mobile device.

tions that support the Apple CarPlay connection

› Connect the mobile device to the front USB input

can be found on the Apple Inc website.

using a cable.

✓ Siri voice control is on.

› Choose to connect via Apple CarPlay.

✓ The data connection in the mobile device is

Apple CarPlay - Connection via Wi-Fi from Info-

switched on.

tainment

Conditions for MirrorLink

› Turn on Bluetooth® and Bluetooth® visibility in the

✓ The device to be connected must have MirrorLink

Apple mobile device.

connection.

› Tap on

Manage mobile devices.

A list of devices and applications that support the

› In the displayed list, look for and select the desired

MirrorLink connection can be found on the web-

device with the symbol

sites of Car Connectivity Consorcium®.

› Follow the instructions on the Infotainment screen

✓ The MirrorLink application needs to be installed

and oÄfiÙm the Bluetooth® pairing.

on the mobile device.

› If another device is connected to the Infotainment,

✓ Some applications require the data connection in

select the device to be replaced.

the connected mobile device to be turned on.

Apple CarPlay - Connect via Wi-Fi from mobile de-

vices

To establish a connection, the following conditions

Operation

must be met:

Operation of the running MirrorLink application

✓ The minimum iOS version is 9.

Display of control surfaces at the bottom

✓ No other mobile device can be connected via

Display of control surfaces at the top

SmartLink.

Return to the menu MirrorLink

✓ Wi-Fi and Bluetooth® functionality is switched on

in the Infotainment system.

› In the mobile device, turn on the CarPlay function.

› Press and hold the

button on the multifunction

steering wheel.

Infotainment Amundsen › Navigation 109

The Infotainment screen displays a connection

› Connect the mobile device to the front USB input

message with the name of the Bluetooth® unit of

using a cable.

the Infotainment.

› Choose to connect through MirrorLink.

› Find available Bluetooth® devices on the phone.

MirrorLink - Disconnect

› Select the Infotainment Bluetooth® unit.

› In the MirrorLink menu, tap on

› If necessary, oÄfiÙm the PIN.

› Tap on

› In the Infotainment screen, select the connection

type Apple CarPlay.

Change to another device / connection type

Infotainment allows you to switch between currently

Apple CarPlay - Disconnect

connected devices and the connection type.

› In the Apple CarPlay menu, tap on the function

› Tap on

area “ŠKODA”.

› Select the desired device or connection type.

› Tap on

Android Auto - Connection via USB

› Turn on the Infotainment.

Navigation

› Turn on the mobile device.

Navigation announcements

› Connect the mobile device to the front USB input

using a cable.

Infotainment route guidance takes place using

› Choose to connect via Android Auto.

graphic driving recommendations and navigation an-

nouncements.

Android Auto - Connection via Wi-Fi from Info-

tainment

The navigation announcements are generated by the

› Tap on

mobile devices.

Infotainment system. Navigation announcement

clarity (e.g. road or city name) cannot always be

› Select the desired device from the list of available

devices.

guaranteed.

› Select the Bluetooth®hands-free pÙofile.

Repeat the last navigation announcement

› oÄfiÙm the PIN; enter it if necessary and then

› Tap on

oÄfiÙm.

Turn off navigation announcements

› If another device is connected to the Infotainment,

› Tap on

select the device to be replaced.

› From the list of known devices, select the desired

device with the symbol.

Navigation overviews

Android Auto - Connect via Wi-Fi from mobile de-

Display menu

vices

› Tap

To establish a connection, the following conditions

must be met:

Map overview

✓ The minimum Android version is 5.

✓ No other mobile device can be connected via

SmartLink.

✓ Wi-Fi and Bluetooth® functionality is switched on

in the Infotainment system.

› Find available Bluetooth® devices on the phone.

› Select the Infotainment Bluetooth® unit.

› If necessary, oÄfiÙm the PIN.

› In the Infotainment screen, select the connection

type Android Auto.

Vehicle position

Android Auto - Disconnect

Route

› In the Android Auto

menu, tap “Return to SKO-

Route view

DA”.

End route guidance

› Tap on

Display the destination input and route view

MirrorLink - Connection via USB

menu

› Turn on the Infotainment.

TÙaffi obstruction

› Turn on the mobile device.

110 Infotainment Amundsen › Navigation

Following driving recommendation

POI

Change map orientation

▶ North-facing 2D map

▶ 2D map facing the direction of travel

▶ 3D map facing the direction of travel

Road signs for the affeted route section

Find destination

Centre the map on the vehicle position

Input line

Display the settings menu

List of recently searched destinations

Turn off navigation announcements

POI categories

Repeat the last navigation announcement

› Tap: search for the selected category

Show the default map

Show destination list

Display map in accordance with the following

Enter destination via address / fiÄd destination

setting

Select the destination you are looking for

▶ Auto - Map in day / night mode depending on the

› Enter the details for the destination search.

vehicle lighting currently switched on

› Select the desired destination.

▶ Day - Map in day mode

▶ Night - Map in night mode

Destination details are displayed with the option of

starting route guidance.

Show map with information about range using

electric drive

Selecting the destination entered via the address

Display navigation in the digital instrument clus-

› Tap on

ter

A menu for entering the destination via the ad-

End route guidance

dress is displayed.

› Enter the required information.

Show the entire route

Destination details are displayed with the option of

Settings

starting route guidance.

Map with information about range using electric

List of stored destinations

drive

› Tap on

The map shows the estimated range achievable us-

ing the electric drive if using highlighted sections.

› Tap on

List of stored destinations

Select category of stored destinations

▶

- Favourites

Map display in the digital instrument cluster

The map can be displayed in the digital instrument

▶

- Last destinations

cluster or on the Infotainment display.

▶

- Telephone contact destinations

› To change the display tap

in the Navigation

Selecting the stored destination

menu.

› Select the category of stored destinations.

Find destination

› Select the desired destination.

› Tap

Destination details are displayed with the option of

starting route guidance.

Infotainment Amundsen › Navigation 111

Recommended destinations

Route calculation

› Tap on

Route calculation

North-facing vehicle position

Current vehicle position

TÙaffi obstruction

Proposed fastest route

Delete the recommended destination

Alternative routes

The view can display up to 5 recommended destina-

Destination position

tions in the following categories:

15 s time countdown before automatic start of

▶ Destination - home address

the route guidance

▶ Destination - business address

› Tap: Interrupt time countdown

▶ Favourites

Start route guidance

▶ Last destinations

Show information on the selected route

Destination alignment depends on the direction in

relation to the current vehicle position. The function-

Set parameters for route calculation

al surface with the destination displays information

Route overview

about the estimated travel time to the destination.

›

Tap on

If the vehicle has active online services and there is a

tÙaffi obstruction on the route to the destination,

the tÙaffi obstruction icon will be displayed.

Delete the recommended destination

› Touch the functional surface for the recommended

destination and swipe left.

› Tap on .

Selecting destination by tapping the map point

› Tap the desired item or the POI icon in the map.

Information on current vehicle position

Final route destination

Tap: the following menu items can be selected:

› Show on map

› Stop route guidance

Route stopover

Tap: the following menu items can be selected.

› Show on map

Show destination details with the following pos-

› Add stopover destination

sible settings:

Destination provided by Infotainment on the

▶

- Save destination as a favourite

route

▶

- Delete favourites

Tap: the following menu items can be selected.

▶

- Set destination as a starting point for

› Show on map

route guidance in demo mode

› Delete

Start direct route guidance

TÙaffi obstruction on the route

Была ли эта страница вам полезна?

Да!Нет

7 посетителей считают эту страницу полезной.

Skoda Superb iV (2021 year). Manual in english — page 5

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.