Skoda Kodiaq (2021 year). Manual in english — page 2

Doors, windows and boot lid › Doors

Deactivation will also switch off the SAFE func-

Doors, windows and boot lid

tion » page 25, Functionality.

Doors

Deactivation

▶ By double locking within 2 seconds.

Opening/closing the door

Or:

Opening from the outside

▶ In infotainment in the menu

Menu

item for interior monitoring

› Unlock the vehicle and

pull on the door handle.

Or:

▶ In infotainment in the menu

Menu item for interior monitoring

The deactivated functions are reactivated after the

vehicle is unlocked and locked again.

Deactivation is to be carried out if the vehicle is,

for example, towed or transported.

Opening from the inside

› Pull the door opening

lever and push the

door away from you.

Closing from the inside

› Grasp the pull handle and close the door.

Child safety lock on the rear doors

Operation

The child lock prevents the rear doors from being

opened from the inside.

Switching on and off

› Turn the child lock with the vehicle key or a Ĕat-

head screwdriver.

A Child lock switched off

B Child lock switched on

Doors, windows and boot lid › Protective door strip

Electrically operated child lock

NOTICE

▶ If any part of the strip remains in the door, seek the

› Press the left button to

help of a specialist garage.

switch oÄ/off the child

lock in the left rear

› Insert a new strip in

door.

the grooves.

› Press the right button

› Press in the strip.

to switch oÄ/off the

child lock in the right

rear door.

The fact that the child

lock is switched on can

be seen by the illuminated displayed in the button.

After switching on the child lock the electric window

A new strip can be purchased from ŠKODA Origi-

is also blocked in the respective door.

nal Parts.

Protective door strip

Window - with electrical operation

What you should be mindful of

NOTICE

Force limiter

Risk of damage to the strip, the door and the body!

To reduce the risk of pinch injuries when closing the

▶ Do not open the door too hastily or abruptly.

windows, the vehicle has a force limiter.

▶ Do not hold the door on the strip when opening

If there is an obstacle, the window closing process is

and closing, as the strip must be able to move in

stopped and the pane retracts by several centime-

and out freely.

tres.

▶ If the strip prevents the door from closing freely,

do not close the door forcefully! Remove the strip,

If the obstacle prevents it from being closed for the

and seek the help of a specialist garage.

next 10 seconds, the closing process is interrupted

once again and the window goes down by several

centimetres.

Usage

If you attempt to close the window again within

10 seconds of the window being moved down for

Depending on the trim level, the doors can each be

the second time, even though the obstacle was not

equipped with a protective strip. This moves out

yet been removed, the closing process is only stop-

when opening the door and protects the central area

ped. During this time, it is not possible to automati-

of the door edge from damage.

cally close the windows by pulling the button all the

When the door closes the protective strip retracts.

way. The force limiter is, however, switched on.

The force limiter is only not operational if you at-

tempt to close the window again within the next

Self-help

10 seconds - the window will now close with full

Replacing the damaged strip

force! If you wait longer than 10 seconds, the force

limiter is switched on again.

CAUTION

Risk of injury!

CAUTION

▶ Be careful when handling the strip.

Risk of injury!

▶ Close the windows carefully, even though they

› Remove the strip from

have a force limiter.

the door.

Doors, windows and boot lid › Window - with electrical operation

Overview of the operating buttons on the

Open all of the windows at the same time

driver's door

› Press and hold the button on the key.

Or:

› Turn off the ignition, open the driver's door, and

hold down the driver's window button until it

stops.

Close all of the windows at the same time

›

Press and hold the button on the key.

Or:

› Turn off the ignition, open the driver's door, and

pull upwards on the driver's window button until it

stops.

Depending upon vehicle equipment:

Or:

Front left window

› For vehicles with a keyless locking system, hold

Front right window

one fiÄ£er on the sensor on the outside of the han-

Rear left window

dle on the front door.

Rear right window

Deactivation/activation of the buttons in the

Settings

rear doors

The window operation is set in the following menu in

Deactivation/activation of the key in the left rear

the Infotainment system:

door (part of the child safety lock with electric

operation) » page 28, Operation

Menu item for window operation

Deactivation/activation of the key in the right

Or:

back door (part of the child safety lock with

Menu item for window operation

electric operation) » page 28, Operation

Troubleshooting

Operation

The window regulator has stopped working after

When the windows are open, irritating noises

repeated opening and closing

may occur at certain speeds.

The window regulator mechanism could have over-

Opening

heated.

› Press the corresponding button slightly down-

› Allow the window regulator mechanism to cool

wards and hold it until the window has reached the

down.

desired position.

The window operation does not work after discon-

Or:

necting the 12 volt vehicle battery

› Press the corresponding button until it stops; the

› Enable window operation » page 30.

window opens automatically. Pressing the button

again will stop the opening process.

Activation after disconnecting the 12-volt

Closing

vehicle battery

› To close, pull gently upwards on the top edge of

the corresponding button and hold until the win-

Activate automatic window operation

dow has reached the desired position.

› Turn on the ignition.

Or:

› Pull the corresponding button upwards and the

window closes.

› Pull the corresponding button until it stops; the

› Release the button.

window closes automatically. By pressing the but-

ton again, the closing process is stopped.

› Pull up the respective button and hold for 1 sec-

ond.

After switching off the ignition, the windows can

still open and close for about 10 minutes so long as

none of the doors are opened.

Doors, windows and boot lid › Sliding/tilting roof

Sliding/tilting roof

› Press and hold the button to turn it off.

› Press and hold the button to close it.

What you should be mindful of

On vehicles with a keyless locking system, it is possi-

CAUTION

ble to close the sliding/tilting roof via the sensor in

Risk of injury!

the door handle of the front door.

▶ Close the sliding/tilting roof carefully, even though

› Hold one fiÄ£er on the sensor on the outside of the

there is a force limiter.

handle on the front door » page 26.

NOTICE

▶ During winter time, if necessary, remove any ice

Troubleshooting

and snow around the area of the sliding/tilting roof

before opening.

Operation of the sliding/tilting sunroof does not

▶ Always close the sliding/tilting roof before discon-

work after disconnecting the 12-volt vehicle bat-

necting the 12 volt vehicle battery.

tery

› Activating operation of the sliding/tilting sun-

roof » page 31.

Operating conditions

✓ Ignition is switched on.

Activation after disconnecting the 12-volt

✓ The outside temperature is higher than -20 °C

vehicle battery

(applicable for the opening of the sliding/tilting

roof).

Activating operation of the sliding/tilting sunroof

Operation

Gradual opening

Complete opening

Gradually reset

Fully reset

› Turn on the ignition.

› Pull the switch all the way down and hold it down.

After about 10 secs, the sliding/tilting roof opens

Gradual opening

and closes again.

Full opening

› Release the switch.

Gradual closing

Complete closing

Sunblind - with electrical operation

Operation

Opening

Closing

After moving the switch to the position B the

› Press or hold the but-

sliding/tilting roof is in the low-noise position (at a

ton to move the roller

speed of about 80 km/h).

blind.

After another movement to position B the sliding/

› Press or release the

tilting roof opens completely.

button to stop the roll-

After switching off the ignition, the sliding / tilt-

er blind from moving.

ing roof can be operated for about 10 minutes as

long as none of the doors are opened.

Comfort operation of the tilting/sliding sunroof

The comfort operation makes it possible to lock the

sliding/tilting roof with the key if necessary.

Doors, windows and boot lid › Sun protection roller blinds for the rear door panes

Activation after disconnecting the 12-volt

Boot lid - with manual operation

vehicle battery

Operation

› Turn on the ignition.

Opening

› Keep the button pressed down. The sunblind

opens and closes again.

› Press the handle and

› Release the button.

lift the lid.

Sun protection roller blinds for the rear

door panes

Operation

The option to open by pressing the handle is deacti-

vated once a speed of 5 km/h is reached. This is acti-

vated again after the vehicle has stopped and a door

is opened.

Closing

› Grasp the fixture A

and pull the lid down.

Brightness protection

› Pull out the sun protection blind by the handle and

hang it into the holder A .

Rolling up

› Remove the sun protection blind from the holder

at the handle and let it roll in slowly.

CAUTION

Sun visors

Danger of opening the tailgate while driving!

▶ Make sure that the latch engages after the Ĕap is

Folding up and folding down

closed.

Set a delayed lid lock

If the lid is unlocked with the

button on the key,

the lid is automatically locked again after closing.

The period after which the lid is locked automatically

can be extended by a specialist garage.

Boot lid - with electrical control

Swivel the front visor towards the windscreen

Operation

Swivel the visor towards the door

CAUTION

Risk of injury!

Objects attached to the sun visors can restrict the

▶ Only operate the tailgate when there is nobody or

view to the outside.

no objects in the swivel area.

In the event of sudden braking or an impact, these

CAUTION

can also cause injuries.

Danger of opening the tailgate while driving!

▶ Do not attach anything to the sun visor.

▶ Make sure that the latch engages after the Ĕap is

closed.

Doors, windows and boot lid › Electrically operated contactless boot lid

NOTICE

Button on the key

▶ Do not manually close the tailgate when moving.

› Press the

button to

▶ Before operating the tailgate, check that there are

open, close or stop the

no objects in the swivel area that could damage the

movement of the tail-

tailgate. Also check that there are no objects with-

gate.

in the immediate vicinity of the vehicle that could

The option to lock exists

damage the vehicle interior and the transported

only on vehicles with a

objects.

keyless locking system.

If the tailgate hits an obstacle when closing, it

The key must not be in

stops and an audible signal sounds.

the vehicle and must be

When automatically closing the tailgate, e.g. un-

at a distance of max. 2 m

der the weight of snow, a broken beep sounds.

from the tailgate.

The rear parking light ĔashiÄ£ twice indicates

The tailgate can also be closed by pulling it brieĔû

that the Ĕap is closed.

downwards.

Handle in the tailgate

› Press the handle to

Settings

open, close or stop the

Set the uppermost position of the tailgate and

movement of the tail-

store it

gate.

It makes sense to set the top position of the tailgate,

The option to open by

e.g. setting for the opening of the tailgate in a limited

pressing the handle is

space due to the garage height.

deactivated once a

› Stop the tailgate in the desired position.

speed of 5 km/h is

reached. This is activated

› Press the button and hold down on the lower

again after the vehicle

edge of the tailgate until an audible signal sounds.

has stopped and a door

Re-adjusting the top starting position of the tail-

is opened.

gate

Button in the tailgate

› Carefully raise the tailgate manually to the limit.

› Press the button and hold down on the lower

› Press the button to

edge of the tailgate until an audible signal sounds.

open, close or stop the

movement of the tail-

gate.

Troubleshooting

The tailgate does not react to the opening signal

›

There is a possible obstacle, e.g. snow; remove it.

Or:

› Press the handle in the tailgate and lift the lid.

Button in the door

Or:

› To open the tailgate,

› Mechanically unlock the Ĕap » page 34.

pull and hold the but-

The tailgate does not react to the closing signal

ton until the tailgate

› Close the tailgate manually.

starts to open.

NOTICE

› To close the tailgate,

▶ Close the tailgate slowly, push down the tailgate

pull and hold the but-

and push in the lock on the centre of the rear edge

ton until the tailgate is

of the tailgate.

fully closed.

› To stop the movement

of the tailgate, pull or

Electrically operated contactless boot lid

release the button.

Operating conditions

✓ Ignition off.

✓ You have the vehicle key with you.

Doors, windows and boot lid › Unlocking the boot lid

✓ No trailer or other accessory is connected to the

▶ Maintenance and repair work in the back of the ve-

trailer socket.

hicle

Operation

Unlocking the boot lid

Opening/closing the lid

Release

If the boot lid does not open, it can be unlocked

manually by the following procedure.

› Insert a screwdriver in-

to the opening in the

panel.

› Release the tailgate by

moving it in the direc-

tion of the arrow.

› Stand in the middle behind the bumper.

› Move one foot quickly under the bumper and re-

move it again.

If the lid doesn’t move, wait a few seconds and re-

peat the swing motion.

Display of the opening/ closing process

The rear turn signal lights light up when the lid is

opened and closed. When you close the lid, audible

signals are additionally sounded.

Stopping/ restoring lid movement

The lid movement can be stopped by a rapid swing-

ing motion with your foot. Lid movement is restored

by a subsequent swinging motion with your foot.

Restriction

The system function may be restricted in the follow-

ing cases:

▶ Downpour

▶ Dirty rear bumper

Settings

Activating and deactivating

The function is activated and deactivated in the fol-

lowing menu in the Infotainment:

Or:

We recommend that the function is deactivated in

the following cases:

▶ Installation of a roof rack

▶ Coupling a trailer or another accessory to the hitch

▶ Car wash

Seats, steering wheel and mirror › Front seat - with manual operation

Seats, steering wheel and mirror

Front seat - with electrical operation

Front seat - with manual operation

Controls on the seat

Adjusting the seat

Controls on the seat

Adjust in a longitudi-

nal direction

Adjust the inclination

Adjusting the height

Adjusting the seat back

Adjusting the seat in the longitudinal direction -

after releasing the operating lever, the lock must

Adjust the inclination

audibly click into place

Adjusting the height

Adjusting the angle of the backrest - do not lean

against the backrest during adjustment

Adjusting the lumbar support: Extent of the cur-

vature

After a certain time, play can develop within the ad-

justment mechanism of the backrest angle.

Adjusting the lumbar support

Set the position of

Folding passenger seat backrest

the curvature

Set the extent of the

Folding down

curvature

› Pull on the operating

lever.

› Fold the backrest for-

wards until it clicks in-

to place.

Set the length of the seat manually

› Press the release han-

dle.

› Push the front part of

Folding back up

the seat forwards or

› Pull on the operating lever.

backwards.

› Press the backrest backwards until it audibly clicks

into place.

Memory function of the seat

Functionality

Valid for vehicles with electrically adjustable driver's

seat.

Seats, steering wheel and mirror › Folding the backrests forward from the luggage compartment

Each of the memory buttons on the driver's seat can

be used to store and recall the set driver's seat and

› Turn the exterior mirror knob to the position .

exterior mirror position.

› Engage reverse gear.

Depending on the equipment, the front passenger

› Adjust the mirror to the desired position.

seat may also have a memory function.

› Disengage reverse gear.

The set mirror position is saved.

Operation

When changing the stored seat and exterior mir-

ror position for forward driving, the passenger exte-

Retrieve stored position

rior mirror position for reverse driving must be re-

› With the ignition off and the driver’s door open,

stored.

press the desired memory button.

› In other instances, hold the button for example

with the ignition switched on or the driver's door

Folding the backrests forward from the

closed.

luggage compartment

The passenger seat position can be retrieved in the

same way.

Stop position change

› With the ignition off and the driver's door open,

press any button on the seat to be adjusted.

Or:

› Press the button on the key.

› In other cases, release the held memory button.

Settings

Second row of seats

Storing driver's seat and exterior mirror position

for driving forwards

Setting the second row of seats

› Turn on the ignition.

Move seats in a longitudinal direction

› Adjust the seat and the

› Pull the lever A and

exterior mirrors.

move the seat.

› Press the button A

The seat must audibly

and within 10 seconds

click into place.

one of the memory

buttons B .

Storing is oÄfirmed by

an acoustic signal.

The seat position can be stored if the angle of in-

clination of the seat back relative to the seat surface

Adjusting the inclination of the seat backrests

is less than approximately 110° and the seat is not in

any of the end positions.

› Pull on the loop A and

adjust the inclination of

Save front passenger seat position

the seat backrests.

Storing the passenger seat position is analogous to

storing the driver's seat position.

The rest must click in-

to place.

Storing front passenger´s exterior mirror position

for reversing

› Turn on the ignition.

› Activate the folding function of the mirror in the

Infotainment in the following menu:

Access to the third row of seats

Applicable to the seven-seater variant of the vehicle.

Or:

Seats, steering wheel and mirror › Park position of rear seat belts

› Pull the release handle.

Folding the backrests forward from the luggage

› Fold the seat back for-

compartment

wards and move the

› Pull on the lever.

seat forwards.

The backrest is un-

locked and partly fol-

ded forwards.

› Fold the backrest for-

wards until it clicks in-

to place.

› To get to the third row

of seats more easily,

attach the seat belt to

Fold back the backrests

the strap.

› Pull on the loop.

› Press the backrest backwards until it audibly clicks

into place.

Fold the middle backrest forwards

› Press the safety button

and fold the backrest

Set the seat in the starting position

forwards.

› Adjust the seat forwards/backwards

› Fold the seat backrest back up.

› Check this by pulling on the seat and on the seat

backrest.

Folding down the seat backs

Fold the middle backrest backwards

Before folding down

› Press the backrest backwards until it audibly clicks

NOTICE

into place.

Risk of damaging the fiÄs of the air outlet nozzles

and the front seats.

▶ Adjust the headrests of the second row of seats so

Park position of rear seat belts

that they are as low as possible.

▶ Adjust the position of the front seats in such a way

that they are not damaged by the folded-down

seat backrests.

Folding the backrests forwards from the passen-

ger compartment

› Pull on the loop A .

› Fold the backrest for-

wards until it clicks in-

to place.

Third row of seats

Folding the third row of seats upwards and

forwards

Before folding down

› Move the second row of seats forwards.

› Remove the roll-up luggage compartment cover.

Seats, steering wheel and mirror › Headrests

Folding down

Headrests

› Press the release han-

Adjusting the headrests

dle.

› Fold the seat backs

Front headrests

forwards.

› Hold the safety button

and move the headrest

in the desired direc-

tion.

Folding back up

› In vehicles with a varia-

ble loading Ĕoor, the

folding components A

Headrests in the second row

are placed on the varia-

› Move the headrest in

ble loading Ĕoor.

the desired direction.

› Pull on the loop.

When pushing down,

The seat backrest

press and hold the

mechanism must audi-

safety button.

bly snap into place.

Before folding up

› Release the latches of the seat belts.

NOTICE

Risk of damage to belt buckles, buckle tongues and

Headrests in the third row

seats.

› Move the headrest in

▶ The straps must be fully retracted.

the desired direction.

› Fold the seat backs forwards.

When pushing down,

Folding up

press and hold the

safety button.

› Pull on the loops at the

same time.

Folding side bolsters on the rear headrest

The folded down side bolsters reduce uncontrolled

sideways head movement , e.g. when sleeping.

› Adjust the headrest to the initial pulled out posi-

tion.

Folding down

› Fold down the side bol-

› Press on the seats.

sters on the head rest.

Seats, steering wheel and mirror › Sleep package

Removing and inserting the rear headrests

Rear armrest

Removing

Settings

Applies to the second row of seats.

› Fold down the armrest.

› Partially fold the re-

spective seat back for-

The folded-down arm-

wards.

rest can be used as a

storage table.

› Move the headrest up

to the stop.

› Press the safety button

and remove the sup-

port.

Inserting

› Insert the headrest into the seat backrest.

Steering wheel

The safety button must click into place.

Buttons/dials on the multifunction steering

wheel

Sleep package

The package includes

folding side bolsters for

the headrest and a bag

with a blanket.

Switch voice control oÄ/off

Heated steering wheel » page 63

Front armrest

Rotate - Adjust the volume

Press - Switch the sound off/oÄ

Settings

Switch to the next track/station played

Adjusting the height

Switch to the previous track/station played

› Raise the backrest to

Show menu of assistance systems

one of the locked posi-

tions.

Switching the Travel Assist assistance system

on / off » page 185

Folding down

› Raise the backrest be-

Depending upon vehicle equipment:

yond the highest

▶ Operating an analogue instrument clus-

locked position and

ter » page 64

fold it down again.

▶ Operating a digital instrument clus-

Adjust in a longitudinal

ter » page 65

direction

Depending upon vehicle equipment:

› Move the backrest to the desired position.

▶ Operating an analogue instrument clus-

ter » page 64

▶ Operating a digital instrument clus-

ter » page 65

Depending upon vehicle equipment:

▶ Operating an analogue instrument clus-

ter » page 64

▶ Operating a digital instrument clus-

ter » page 65

Seats, steering wheel and mirror › Interior rear-view mirror

Setting the steering wheel position

After switching off the ignition, it is then no longer

possible to switch on the ignition, to lock the steer-

WARNING

ing and to switch on the electrical components.

Risk of an accident!

Ĕashes

▶ Do not adjust the steering wheel while driving.

Message regarding a fault in the steering lock

› Swing the safety lever

› You may continue driving, exercising appropriate

downwards.

caution. Seek the help of a specialist garage.

Steering column lock not unlocked

Ĕashes

Message concerning the required steering

wheel movement

› Adjust the steering

› Move the steering wheel slightly back and forth.

wheel to the desired

› If the steering does not unlock, stop the vehicle

position.

and seek the help of a specialist garage.

Interior rear-view mirror

› Press the safety lever

Operation

as far as it will go.

Interior mirror with manual darkening

Mirror is not dark-

ened

Mirror darkens

Troubleshooting

Power assisted steering faulty

Interior mirror with automatic darkening

illuminates - total failure of the power assisted

Darkening of the mirror is automatically controlled

steering, failure of steering assistance

through the sensors in the mirror once the engine is

› Turn off the ignition, start the engine and drive a

started.

few meters.

CAUTION

› If the indicator light

does not go out, do not

Risk of an accident!

continue driving. Seek the help of a specialist ga-

A glowing display e.g. a mobile phone or navigation

rage.

device may affet the function of the automatic mir-

ror darkening.

illuminates - partial failure of the power assis-

▶ Do not attach these devices close to the mirror.

ted steering, possible reduction in power

steering

› Turn off the ignition, start the engine and drive a

Wing mirror

few meters.

Operation

› If the indicator light

does not go out, you can

drive on, exercising appropriate caution. Seek the

Depending on the equipment, the mirrors can be fol-

help of a specialist garage.

ded in manually or electrically.

Steering column lock faulty

Ĕashes

Message regarding a fault in the steering col-

umn lock

› Stop the vehicle.

› Seek the help of a specialist garage.

Seats, steering wheel and mirror › Wing mirror

Positions of the rotary knob

WARNING

Risk of an accident!

Adjust the left-hand

The exterior mirrors make objects appear farther

exterior mirror

away.

Switch off operation

▶ Use the rear-view mirror to determine the distance

Adjust the right-

from vehicles behind.

hand exterior mirror

Fold mirror in elec-

NOTICE

trically (to fold back

Danger of mirror damage!

out, select a differ-

▶ If the electrically foldable mirror is swung out by

eÄt position)

external iÄĔueÄes (e.g. due to an impact during

manoeuvring), fold the mirror in using the rotary

Heat the mirror

knob and wait for an audible folding sound.

when the engine is running

Adjusting the mirror surface

› Select position or .

Settings

› Turn the rotary knob in the direction of the arrows.

Activation or deactivation of the automatic folding

Folding electrically folding mirrors automatically

of the exterior mirrors, the synchronous adjustment

If this function is activated, the mirrors are folded in

of the mirror surfaces as well as the lowering of the

when the vehicle is locked and folded back when it is

passenger-side mirror surface when reversing are

unlocked.

carried out in the Infotainment in the following

menu:

Locking of the vehicle is not indicated by the fact

that the mirrors fold in. Locking of the vehicle is indi-

cated by the turn signal lights ĔashiÄ£.

Or:

Manually foldable mirrors

› Fold the mirror towards the side window by apply-

ing pressure with your hand.

Troubleshooting

Setting the mirror surfaces synchronously

If this function is activated, the mirror surface of the

Electric mirror operation impaired

passenger mirror is also set when the mirror surface

› Adjust the mirror surface by pressing it lightly with

of the driver's mirror is set.

your fiÄ£er.

Mirror with memory function

CAUTION

Valid for vehicles with electrically adjustable driver's

Risk of burns!

seat.

▶ Do not touch heated exterior mirror surfaces.

The current setting for the exterior mirror surfaces

can be stored in the memory of the driver's

seat » page 36 or the remote key » page 24.

Lower the passenger mirror surface when revers-

ing

Valid for vehicles with electrically adjustable driver's

seat.

The mirror surface of the passenger mirror takes in

the memory of the driver's seat » page 36 or the re-

mote key » page 24 stored position to improve visi-

bility when reversing.

Operating conditions

✓ The function can be activated in Infotainment.

✓ The mirror position is saved.

✓ The reverse gear is engaged.

✓ The adjustment knob is in the position.

The mirror automatically resumes the home position

when driving forward at speeds above 15 km/h or

after the ignition is switched off.

Restraint systems and airbags › Seat belts

illuminated - a front or rear seat belt is not fas-

Restraint systems and airbags

tened

Seat belts

lights up - rear seat not occupied

Functionality

illuminated - a rear seat belt is not fastened

Seat belts that are fastened correctly offer very

good protection in the event of an accident. They re-

illuminated - a rear seat belt is not fastened

duce the risk of an injury and increase the chance of

survival in the event of a major accident.

illuminated - a rear seat belt is fastened.

WARNING

▶ The seat belts must not be removed or altered in

illuminated - a rear seat belt is fastened.

any other way.

▶ If the driver's seat belt is damaged, stop driving.

illuminated - a rear seat belt is fastened.

▶ If another seat belt is damaged, the seat must not

be occupied.

▶ Do not repair damaged seat belts yourself.

Operation

▶ Have a damaged seat belt replaced immediately by

a specialist garage.

Fastening the seat belt

Automatic belt retractor

› Grasp the buckle latch

The automatic retractor locks the belt in the event

and slowly pull the belt

of a jerky pull on the belt. The belts lock, for example,

over the chest and pel-

when full braking, when the car accelerates, when

vis towards the buckle.

driving downhill and when cornering.

› Insert the buckle latch

WARNING

into the buckle until

▶ If the seat belt does not lock when pulled jerkily,

there is an audible

have the retractor checked by a specialist garage.

click.

› Pull on the belt to en-

Belt tensioners

sure that the buckle is

The safety for the driver, front passenger and the

securely fastened.

two passengers on the outer seats of the second

row of seats who are wearing seat belts is en-

Unfastening the seat belt

hanced by the belt tensioners fitted to the inertia

› Grasp the buckle latch

reels of the front seats and the outer seats of the

and release it by press-

second row of seats.

ing the red button.

If there is a collision with a certain severity, the seat

› Hold the belt so it does

belt is tightened by the belt tensioner so that unwan-

not twist when rolling

ted body movement is prevented.

up.

The belt tensioner can also be deployed when the

seat belt is not fastened.

Belt tensioners are not activated in the event of mi-

nor collisions or in accidents in which no major

forces are produced.

Put on belt with two buckle latches and put down

Smoke is released when the belt tensioner is de-

ployed. This does not indicate a vehicle fire.

Reversible belt tensioner

Vehicles with a proactive occupant protection sys-

tem include reversible belt tensioners » page 188.

The reversible belt tensioners increase safety for the

belted driver and front passenger by automatically

tightening the seat belt tightly over the body in criti-

cal driving situations and then releasing it again.

Status display in the instrument cluster display

› Pull the belt slowly by the buckle latch A to put it

Depending on the type of display, the display can be

on.

as follows:

Restraint systems and airbags › Child seat

› Insert the buckle latch A into the buckle until

Child seat

there is an audible click.

What you should be mindful of

› Use the buckle latch B to slowly pull the belt over

your chest and pelvis.

For how to install and use the child seat, please note

› Insert the buckle latch B into the second buckle

until there is an audible click.

instructions of the child seat manufacturer.

› Pull on the belt to ensure that the buckle latch is

For safety reasons, we always recommend that chil-

securely fastened.

dren are transported on the back seats. Carry chil-

dren on the front passenger seat only in exceptional

› To take it off take the buckle latch A and release

cases.

by pressing the red button.

Use child seats according to standard ECE-R 44 and

› Grasp the buckle latch A and release it by pressing

ECE-R 129 of the European Economic Commission.

the red button.

Child seats according to standard ECE-R 44 and

› Hold the belt so it does not twist when rolling up.

ECE-R 129 are marked with the test symbol: large E

in a circle, with the test number below.

Settings

We recommend using child seats from the ŠKODA

Original Accessories range. These child seats have

› Move the seat belt

been developed and tested for use in ŠKODA vehi-

height adjuster up-

cles. They satisfy the standard ECE-R 44 or ECE-R

wards to increase the

129.

height.

WARNING

▶ When installing the child seat on a seat in the sec-

ond or third row of seats, adjust the corresponding

seat in front so that there is no contact between

the child seat and the seat in front, or the child be-

ing carried in the child seat.

▶ Before installing a forward-facing child seat, adjust

› Press the safety button

the headrest so that it is as low as possible.

and move the seat belt

height adjuster down

▶ If the head restraint prevents the child seat from

to reduce the height.

being fitted, then the head restraint must be re-

moved.

› After adjustment, firm-

lû pull on the belt to

After removing the child seat, reinstall the head-

ensure that the seat

rest.

belt height adjuster has

▶ When installing the child seat, avoid contact be-

correctly locked in

tween the roof and the rear pillar. If the head air-

place and that the belt

bag is deployed, there is a risk of injury.

is locked securely.

▶ If using a separate child seat cushion, adjust the

headrest so that the child's head is Ĕush with, but

not protruding above the height of the top edge of

Troubleshooting

the headrest.

Blocked belt retractor

› Grasp the strap in the

Using a child seat on the front passenger seat

middle and pull quickly.

When using a child seat on the passenger seat, any

› Hold the strap and let

ouÄtrû-speifi regulations must be observed.

it roll up slowly.

› Pull on the strap to see

Never use a child seat in which the child is carried

if the retractor is

with his or her back to the direction of travel on a

working properly.

seat protected by an active airbag placed in front of

the seat. This could cause serious injury to the child,

› If the strap is still

even death.

blocked, repeat the un-

locking procedure

This is also indicated by the following stickers:

once or twice.

› If the strap is still blocked, seek the help of a spe-

cialist garage.

Restraint systems and airbags › Child seat

▶ If possible, move the front passenger seat back-

wards so that there is no contact between the

front passenger seat and the child seat behind it.

▶ Adjust the height-adjustable front passenger seat

as much as possible.

▶ Set the front passenger seat belt as high up as pos-

sible.

WARNING

Risk of the seat belt causing a neck injury to the

transported child!

Sticker on the passenger sun visor

▶ For child seats in groups 2 and 3, ensure that the

guide fittiÄ£ attached to the child seat headrest is

Sticker on the central body pillar on the passenger

positioned in front of or at the same height as the

side

seat belt height adjuster on the central body pillar.

The following instructions must be followed when

▶ Adjust the height of the front passenger seat belt

using a child seat on the front passenger seat:

so that the belt passes through the guide fittiÄ£

without kinking and is not bent over the edge of

▶ It is essential to deactivate the front passenger air-

the guide fittiÄ£.

bag if using a child seat in which the child is trans-

ported with its back facing the direction of trav-

WARNING

el » page 48.

▶ As soon as the rear-facing child seat is no longer

▶ If possible, adjust the front passenger seat back-

being used on the front passenger seat, activate

rest so that it is vertical, to ensure that there is se-

the front passenger airbag again.

cure contact between the backrest and the child

seat.

Recommended child seats

Grouping of child seats according to standard ECE-R 44.

Group

Weight of the child

up to 10 kg

up to 13 kg

9-18 kg

15-25 kg

22-36 kg

Recommended child seats

Approval number

Group

Manufacturer

Type

Attachment

Order number

(E1 ...)

(up to 13

Britax Römer

Baby Safe Plus

Isofix base frame

1ST019907

04 301146

kg)

ISOFIX and TOP

Britax Römer

Duo Plus TT

DDA000006

04 301133

(9-18 kg)

TETHER

Safety belt and

Britax Römer

Kidfix XP ^a)

ISOFIX/safety

000019906K

04 301198

2-3

belt ^b)

(15-36 kg)

Safety belt and

Britax Römer

Kidfix II XP

ISOFIX/safety

000019906L

04 301323

belt ^b)

For optimum protection, especially in the event of a side impact, it is recommended that you use this child

seat complete with the backrest.

Only use the fastening means of the seat belt if the seat is not equipped with the ISOFIX system.

Restraint systems and airbags › Fasteners for child seats

Fasteners for child seats

Use of child seats

Overview of usability of child seats according to standard ECE-R 16.

Child seats with the ISOFIX system

Front passenger’s seat

Second row of seats

Size category

With activa-

With deacti-

Third row of

Group

of child seat^-

ted front air-

vated front

Outer seats ^c)

Centre seat

seats

bag ^b)

airbag ^b)

(up to 10 kg)

(up to 13 kg)

(9-18 kg)

IUF

(15-25 kg)

(22-36 kg)

The size category of the child seat is indicated on the child seat plate.

If the passenger seat is equipped with ISOFIX system holding eyelets, it is suitable for the installation of

an ISOFIX child seat with “Semi-Universal” approval.

The seat is suitable for the fixiÄ£ system ISO/R3.

IL The seat is suitable for the ISOFIX child seats with “Semi-Universal” approval.

IUF The seat is suitable for forward-facing child seats and is permitted for use in this weight category.

X The seat is not equipped with eyelets for the ISOFIX system.

i-Size

Front passenger’s seat

Second row of seats

With activated

With deactivated

Third row of seats

Outer seats

Centre seat

front airbag

i-U

i-UF The seat is suitable for forward- and backward-facing i-Size child seats of the “Universal” category.

X The seat is not suitable for i-Size child seats of the “Universal” category.

Restraint systems and airbags › Fasteners for child seats

Child seat fastened with a safety belt

Front passenger’s seat

Second row of seats

Third row of seats

Group

With activated

With deactivated

a) b)

Outer seats

Centre seat ^a)

front airbag

(up to

U ^c)

10 kg)

(up to 13

U ^c)

kg)

(9-18 kg)

(15-25 kg

)

(22-36 kg

)

It is prohibited to install a child seat with a foot support on the middle seat of the second row and on the

seats of the third row.

ded child seats on the third row of seats, adjust the second row as far forward as possible in a longitudinal

direction.

Adjust the height-adjustable front passenger seat as much as possible.

U The seat is suitable for the child seat category “Universal” and is permitted for use in this weight group.

UF The seat is suitable for forward-facing child seats in the “Universal”category and is permitted for use in this

weight group.

L The seat is only suitable for recommended child seats in category 2-3 » page 44.

X The seat is not suitable for children in this weight group.

Overview

Holding eyes for instal-

ling the child seat using

ISOFIX

the ISOFIX system.

WARNING

▶ On the retaining eyelets that are used to install the

child seat with the ISOFIXSystem provided, do not

attach any other child seats, belts or objects.

The ISOFIX system allows for the fast and secure in-

stallation of the child seat. The eyelets for installing

the child seat using the ISOFIX system are located

on the outer seats in the second row and possibly on

TOP TETHER

the front passenger seat.

WARNING

A child seat that uses the ISOFIXsystem can only be

▶ Child seats with the TOP TETHER- Only use the

installed in the vehicle if it is approved for this vehi-

system on the seats with the eyelets TOP TETH-

cle type. Further information can be obtained from a

ERSymbol are provided.

ŠKODA partner or from a list of vehicles enclosed

▶ Only attach one belt from the child seat to a lock-

with the child seat.

ing eye TOP TETHER-Fasten the system.

▶ When attaching the child seat with the TOP TETH-

ER- No other object may be attached to the eyelet

TOP TETHERSystem.

Restraint systems and airbags › Airbags

WARNING

Danger of serious or fatal injuries!

▶ Maintain the correct seating position.

▶ Do not keep your limbs in the deployment area of

the airbags.

In the following situations, no airbags are deployed:

▶ Minor frontal and side collisions

▶ Rear-end collision

▶ Vehicle rollover

Holding eyelets on the rear seats in the second row

If the measured deceleration rate is below the refer-

The belt fastened into the TOP TETHER system re-

ence values programmed into the control unit, the

stricts the movement of the upper part of the child

airbags will not be deployed despite possible serious

seat. The holding eyelets for attaching the belt are

vehicle damage.

located on the outer rear seats on the second row

A , as well as on the middle rear seat B of the sec-

ond row when necessary.

Airbag overview

The installation location of the airbags is marked

with the lettering

Airbags

Usage

The airbag system provides, as a supplement to the

seat belts, additional occupant protection during se-

vere frontal and side-on collisions.

The best possible protective effet of the airbag is

achieved only when the seat belt is also worn. The

airbag system is no substitute for the seat belts.

Front airbags

What you should be mindful of

Side airbags - front

Airbag systems can only properly protect if all occu-

Head airbags

pants have been secured and they are in the correct

seating position.

Side airbags - rear

No persons, animals or objects such as cup holders

Driver's knee airbag

or hangers for clothes may be in the deployment

area of the airbags » page 47.

WARNING

Danger of a functional restriction of the side airbags!

▶ Do not cover or stick anything over the steering

▶ Do not exert excessive forces, e.g. impacts, on the

wheel or the dash panel. The front airbags were

seat backs.

not able to deploy.

▶ Do not use seat covers that have not been ap-

The front passenger airbag should be switched off in

proved by ŠKODA.

some situations » page 48.

▶ Have damaged seat covers at the installation loca-

tion of the side airbags repaired by a specialist ga-

rage.

Functionality

Deactivating the airbags

When sinking into the iÄĔated airbag, the forward

We recommend having airbags other than the front

movement of the body is damped and the risk of in-

passenger airbag deactivated » page 48, Opera-

jury is reduced.

tionby a ŠKODA service partner.

As the airbags iÄĔate, smoke is released. This

Deactivation of the airbags should be considered in

does not indicate a vehicle fire.

cases such as the ones below:

Airbag deployment in the event of an accident

▶ If the driver's seat adjustment is correct, the dis-

Airbag deployment is iÄĔueÄed by many factors.

tance of at least 25 cm between the centre of the

The deceleration rate at the time of impact is crucial.

Restraint systems and airbags › Key switch for the front passenger airbag

steering wheel and the sternum cannot be main-

Operation

tained.

Before switching off/sõitchiÄg on the front pas-

▶ Additional operating controls for a physically disad-

senger airbag

vantaged driver are installed in the vehicle.

Depending on the key type:

▶ The vehicle has special seats, e.g. orthopaedic

seats without side airbags.

› Completely fold out the key bit.

illuminates for 4 seconds after the ignition is

Or:

switched on and then Ĕashes for 12 seconds

› Remove the key bit.

- Airbag or belt tensioner deactivated with the diag-

nostic device

Switch front passenger front airbag oÄ/off

Message regarding the deactivated airbag or belt

› Switch off the ignition.

tensioner

› Open the passenger

WARNING

door.

If an airbag is deactivated during the sale of the vehi-

› Insert the key bit into

cle, inform the buyer!

the slot in the key

switch as far as it will

go.

Requirements

› To Switch off, carefully

rotate the key switch

✓ Ignition on

into the position

› To Switch on, carefully rotate the key switch into

Troubleshooting

the position

› Remove the key bit from the slot.

Airbag system faulty

› Close the passenger door.

illuminates

Message regarding an airbag fault

› Turn on the ignition and check that the front pas-

senger airbag indicator lights are lit up.

› Seek the help of a specialist garage.

Warning lights

▶

After switching on the igni-

Key switch for the front passenger

tion, the two indicator lights

airbag

light up brieĔû.

▶ If the system is OK, both of

Usage

the indicator lights go out.

Deactivation of the front passenger airbag is provi-

▶ One of the indicator lights then lights up again de-

ded for the following cases, for example:

pending on the position of the key switch:

▶ A rear-facing child seat is mounted on the front

lights up - front passenger airbag switched

passenger seat.

off

▶ The minimum distance to the control panel cannot

lights up 65 secs after the ignition is

be maintained.

switched on - passenger front airbag

switched on

What you should be mindful of

Troubleshooting

WARNING

Danger of fault in the passenger airbag deactivation

Key switch for airbag deactivation is faulty

system!

Ĕashes together with

▶ Only switch off the airbag when the ignition is

The front passenger airbag will not be de-

switched off.

ployed in the event of an accident!

WARNING

› Have the airbag system checked by a specialist ga-

Danger of unexpected deployment of the passenger

rage immediately.

airbags in an accident!

▶ After switching off the passenger airbag with the

key bit, do not leave the key bit inserted in the key

switch while driving. Shocks can cause the Key as-

signment to turn in the slot and trigger the airbag.

Была ли эта страница вам полезна?

Да!Нет

Skoda Kodiaq (2021 year). Manual in english — page 2

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.