Skoda Kodiaq (2021 year). Manual in english — page 3

Lighting, windscreen wipers and washers › Exterior lighting

illuminates

Lighting, windscreen wipers and

› Switch on the light.

washers

Exterior lighting

Operation

Functionality

Switching off the

Unless otherwise stated, the light works when the

lights except the

ignition is switched on.

daytime running

Daylight running lights

lights

The daytime running lights illuminate the area in

Switching the low

front of the vehicle.

beam oÄ/off auto-

matically

In vehicles for certain markets, this also provides

Switching on the

lighting for the rear area of the vehicle.

parking lights

Operating conditions

Switching on the low

✓ The lights switch is in position

beam

Switching the low beam oÄ/off automatically

As the basic position of the light switch, use posi-

The low beam is automatically switched on or off de-

tion

pending on the lighting conditions.

High beam and headlight Ĕasher

Operating conditions

The high beam works when the low beam is on.

✓ The light switch is in the

position.

Switch on high beam

The automatic headlight circuit is indicated by the il-

lumination of the symbol

in the light switch.

Switch off main

beam / switch on

Switching low beam on automatically in rain

headlight Ĕasher

Operating conditions

✓ The light switch is in the

position.

When the main beam or

✓ The function is activated.

headlight Ĕasher is

✓ The windscreen wipers are switched on for lon-

switched on, the indica-

ger than 30 seconds.

tor lamp lights up in the instrument cluster

The automatic headlight circuit is indicated by the il-

CAUTION

lumination of the symbol

in the light switch.

Risk of an accident!

▶

Do not dazzle other road users with the high beam.

Full LED Headlights

When the light switch is in position

, the head-

Turn signal

lights provide the best possible beam of light in front

Switching on the

of the vehicle. The Dynamic cornering light function

turn signal light on

ensures the best possible illumination of the curve

the right - the warn-

area.

ing light Ĕashes in

CORNER function

the instrument clus-

The CORNER function is intended for turning or ma-

ter

noeuvring (e.g. when parking).

Switching on the

turn signal light on

The function illuminates the vicinity of the vehicle

the left - the warn-

front in the direction of travel.

ing light Ĕashes in

Operating conditions

the instrument clus-

✓ The turn signal is switched on or the front wheels

ter

are steered sharply.

Turn signal - convenience signalling

✓ The low beam is switched on.

Convenience signalling enables three Ĕashes of the

✓ The fog lights are not switched on.

turn signal lights without having to move the lever

✓ The driving speed is lower than 40 km/h.

up or down.

When no light is switched on

› Tap the control lever up or down.

The symbol in the light switch may also light up in

The corresponding turn signal lights Ĕash three

the instrument cluster, indicating that it is necessary

times.

to switch on the light.

Lighting, windscreen wipers and washers › Exterior lighting

Tap the lever in the opposite direction ahead of

› Turn the light switch to position

time to stop signalling.

› Switch off the ignition.

Fog light

› Lock the vehicle.

When the parking light is switched on, an acoustic

Positions for pulling out

warning signal sounds after the ignition is switched

the light switch

off and the driver's door is opened. After a few sec-

Fog lights - when

onds or after the driver's door is closed, the warning

switched on, the in-

signal will stop.

dicator light in the

The light may switch off automatically if the 12-volt

instrument cluster il-

vehicle battery is too low. If the parking lights on

luminates

both sides are switched on with the ignition off, the

Rear fog light - when

lights will not be switched off automatically and the

switched on, the in-

12 volt vehicle battery may be discharged.

dicator light in the

instrument cluster illuminates

Settings

› Turn the light switch to position

› Pull the light switch to the appropriate position.

Activating/deactivating the automatic headlights

The rear fog light does not illuminate when an ac-

system in rain

cessory is connected to the trailer socket.

The function is activated or deactivated in the fol-

lowing menu in the Infotainment system:

Hazard warning light system

› Press the button to switch on or off in the mid-

dle part of the control panel.

Or:

The hazard warning lights can be switched on auto-

matically during hard braking. The hazard warning

Activating/deactivating convenience signalling

lights are then switched off again automatically

The function is activated or deactivated in the fol-

when starting off or accelerating.

lowing menu in the Infotainment system:

When the hazard warning system is on and the

turn signal is switched on, the hazard warning lights

will be switched off temporarily and only the turn

Or:

signal will Ĕash on the relevant side of the vehicle.

One-sided parking light

Headlight range control of the Halogen headlights

The one-sided parking light allows one side of the

› In Infotainment, select the following menu:

parked vehicle to be illuminated through activation

of the corresponding sidelights.

Switch on the side-

Or:

lights on the right

Switch on the side-

› Adjust the headlight range using the slider. The

lights on the left

headlight range must correspond to the vehicle's

load.

› Switch off the ignition.

Front seats occupied, boot empty

› Move the lever to the

appropriate position.

All seats occupied, boot empty

All seats occupied, boot loaded

› Lock the vehicle.

Driver's seat occupied, boot loaded

When the parking light is

In the event of another vehicle loading condition, the

switched on, an acoustic

positions ,

can be used.

warning signal sounds and the driver's door is

opened. After a few seconds or after the driver's

For the Full LED headlights, the headlight range

door is closed, the warning signal will stop.

control is adjusted automatically.

Double-sided parking light

WARNING

The two-sided parking light allows the parked vehi-

Risk of an accident!

cle to be illuminated through activation of the side-

An incorrectly adjusted headlight range can cause in-

lights.

suffiieÄt vehicle lighting or can dazzle other road

users.

› Turn on the ignition.

▶ Adjust the headlight range correctly.

Lighting, windscreen wipers and washers › COMING HOME, LEAVING HOME exterior lighting

Adjust headlights for driving in right / left-hand

COMING HOME, LEAVING HOME

traffic

exterior lighting

Applies to full LED headlights.

Functionality

› In Infotainment, select the following menu:

The COMING HOME function turns on the light after

turning off the ignition and opening the driver's door.

Or:

The light switches off automatically after the set

lighting time has elapsed.

› Activate the travel mode function.

The LEAVING HOME function switches on the light

when unlocking the vehicle with the wireless remote

control.

Troubleshooting

Turn signal light defective

Ĕashes faster - turn signal light on the right de-

Operating conditions

fective

✓ Visibility has worsened.

› Check the turn signal light on the right.

✓ The light switch is in the

position.

Ĕashes faster - turn signal light on the left de-

fective

Settings

› Check the turn signal light on the left.

This function is set in the following menu in the Info-

does not Ĕash when the trailer is hitched -

tainment system:

trailer turn signal light defective

› Check the trailer lighting.

Or:

Light bulb or LED bulb is defective

illuminates

Information appears in the display regarding

the defective lights.

Light Assist high-beam assist system

› Replace the defective bulb.

Functionality

› In case of a defective LED bulb, contact a specialist

garage for help.

The high beam assist system automatically switches

the high beam on and off.

The headlights are misted up on the inside

WARNING

Inside the headlights, moisture may occur. This is not

Risk of accident!

a defect.

▶ If necessary, manually switch the high beam on or

Malfunction of the automatic headlight circuit

off.

› Clean the windscreen in the area of the rain/light

sensor.

Operating conditions

Beam of light in front of the vehicle has shortened

Headlight defective.

✓ The system is activated.

› Seek the help of a specialist garage.

✓ The light switch is in the

position.

✓ The driving speed is higher than 30 km/h or 60

Driving lights defective

km/h (depending on the vehicle equipment).

If a message regarding the failed driving lights is dis-

✓ The low beam is switched on.

played, the light will work in emergency mode.

› Drive on, exercising appropriate caution.

› Seek the help of a specialist garage.

Lighting, windscreen wipers and washers › Replace light bulbs

Operation

▶ Do not touch the glass of the light bulb with your

bare fiÄ£ers.

Switching on

NOTICE

› Push the lever in the

Danger of headlight damage due to the ingress of

direction of the arrow.

water and dirt!

It lights up in the instru-

▶ Always fit the protective cap on the headlight cor-

ment cluster

from

rectly after changing a bulb.

the isolation box.

Conditions for changing a bulb

Switching off

✓ Ignition off

› Manually switch the high beam on or off.

✓ Light switched off

Function restriction

Low beam

The system may dazzle other road users if their

headlights/lights are not detected for the following

› Remove the protective

reasons, for example:

cap from the headlight.

▶ The headlights/lights of oncoming vehicles are

covered by crash barriers, for example.

▶ The headlamps/lights of the oncoming or preced-

ing vehicle are dirty or not functioning.

Settings

Activation/deactivation

› Turn and remove the

The function is activated or deactivated in the fol-

socket with the bulb.

lowing menu in the Infotainment system:

Or:

Replace light bulbs

What you should be mindful of

› Remove the bulb from

the socket.

DIY replacement of the following bulbs is possible.

› Insert a new bulb into

Have the remaining light sources replaced by a spe-

the socket so that the

cialist garage.

fixiÄ£ lug A snaps into

The new bulb must conform to the speifiatioÄ of

the recess on the bulb.

the original light bulb. The name of the bulb is

› Insert the socket with

marked on the bulb socket.

the light bulb into the

headlight and turn it

After changing a bulb in the low beam light, the main

clockwise to secure.

beam or fog light, have the headlights adjusted by a

specialist garage.

› Fit the protective cap on the headlight again.

CAUTION

Halogen lamps are pressurised and can burst during

replacement!

▶ Wear gloves and safety goggles.

NOTICE

Contamination of the halogen lamp reduces the life

of the lamp!

Lighting, windscreen wipers and washers › Replace light bulbs

Main beam and side lights

Insert the protective cap on the headlight

›

Reinstall the protective cap.

Remove protective cap from headlight

› Remove the protective

cap.

Front turn signal

› Remove the protective

cap from the headlight.

Changing the bulb for the main beam

› Turn and remove the

socket with the bulb.

› Remove the base with

the bulb.

› Remove the bulb from

the socket.

› Change the bulb in the

› Insert a new bulb into

socket.

the socket so that the

fixiÄ£ lug A snaps into

the recess on the bulb.

› Insert the socket with

the light bulb into the

headlight and turn it

clockwise to secure.

Change the light bulb for the parking light

› Insert the socket with

› Remove the base with

the light bulb into the

the bulb.

light so that the fixiÄ£

lugs A fit into the re-

cesses on the head-

light.

› Fit the protective cap

on the headlight again.

› Change the bulb in the

Fog lights

socket.

› Push the base with the

Removing the cover cap from the wheel housing

bulb into the headlight

› Adjust the front wheels so that the cover cap is ac-

as far as it will go.

cessible.

Lighting, windscreen wipers and washers › Replace light bulbs

› Insert the bracket from

Rear turn signal

the tool kit into the re-

Loosen and remove the light

cess in the cover cap.

› Remove the cover by

› Loosen and remove the

pulling on the bracket.

grid in the area A .

Removing the defective light bulb

› Remove the rubber

protective cap from

the headlight.

› Unscrew the screw.

› Turn the bulb and re-

move it.

Remove the light.

›

› Release the connector

and remove it from the

bulb.

› Slightly pull out the

lock A at the plug.

› Press the safety button

and remove the plug.

Inserting a new bulb and cover cap in the wheel

arch

Replacing the light bulb

› Insert the plug into the new bulb until it clicks into

place.

› Turn and remove the

› Insert the new bulb into the headlight so that the

socket with the bulb.

guide lugs on the bulb are aligned with the corre-

sponding openings in the headlight.

› Turn the bulb clockwise to secure.

› Replace the rubber protective cap on the headlight.

› Insert the cover in the wheel arch and lock into

place.

Lighting, windscreen wipers and washers › Interior lighting

› Change the bulb in the

Switching on automatically

socket.

The lighting switches on when one of the following

› Insert the socket with

events occurs.

the new bulb into the

▶ The vehicle is unlocked

light so that the guide

▶ One of the doors is opened

lugs on the socket are

aligned with the corre-

Automatic switch off

sponding openings in

The lighting switches off when one of the following

the light.

events occurs:

› Turn the socket clock-

▶ The vehicle is locked

wise to secure.

▶ The ignition is switched on

Insert and fix the light

▶ About 30 seconds after all the doors have been

› Insert the connector into the light until it clicks into

closed

place.

If a door remains open and the ignition is switch-

› Push in the slightly pulled out locking device on the

ed off, the lights will turn off automatically after 10

plug.

minutes.

Automatic switching oÄ/off of the footwell light-

ing

The lighting only works when the dipped or parking

lights are on.

The lighting is also switched on automatically after

opening the door (e.g. when getting in or out).

Turn on the lighting for the make-up mirror in the

sun visors on the windscreen

›

Slide off the cover of the make-up mirror.

› Insert the lamp with the holes A onto the pins B

in the body.

Settings

NOTICE

Risk of damage to the electrical system due to water

The brightness level of the footwell lighting is set in

ingress!

the Infotainment in the following menu when the

▶ Make sure that the seal is used correctly when in-

low beam or parking light is switched on:

stalling the lamp C .

NOTICE

Or:

Risk of damage to the electrical system!

▶ Make sure that the lines between the lamp and the

body are not pinched when the lamp is inserted.

› Screw the light into place.

Interior ambient light

› Reinstall the grid.

Usage

The ambient lighting ensures a comfortable atmos-

Interior lighting

phere in the vehicle interior.

Operation

The lighting only works when the dipped or parking

lights are on.

Operation of the lighting

The lighting is also switched on automatically after

Lighting in front and rear

opening the door.

Rear lighting

Reading lamp left

Reading lamp right

Settings

Automatically switch on and switch off

When the front light is set to

, the rear light

The background lighting brightness settings are set

is automatically switched on or off.

in the Infotainment system, in the following menu:

Or:

Lighting, windscreen wipers and washers › Windscreen wipers and washers

Wipe and wash the rear window

Windscreen wipers and washers

Operating conditions

✓ Engine compartment Ĕap closed

✓ Boot lid closed

✓ Ignition on

Operation

Spring-loaded position:

▶ Washing and wiping the windscreen

WARNING

Risk of an accident!

▶ Cleaning the rear view camera

At low temperatures, windscreen washer Ĕuid can

Wiping

freeze on the windscreen and restrict visibility.

Switching off

▶ Only use the windscreen washer when the wind-

screen is warm.

Automatic rear window wiping

Wipe and wash the windscreen

If the windscreen wiping is performed without inter-

ruption, then the automatic regular intermittent wip-

ing of the rear window takes place.

When the windscreen wipers are switched on, the

rear window is automatically wiped when the re-

verse gear is engaged.

Settings

Activating/deactivating automatic wiping

The functions for automatic rear window wiping and

Fast wiping

automatic wiping in the rain can be activated and de-

activated in the following menu in the Infotainment

Slow wiping

system:

Depending upon vehicle equipment:

▶ Intermittent wiping

Or:

▶ Automatic wiping controlled by the rain sensor

Switching off

Tip-wiping (spring-loaded position)

RefilliÄg windscreen washer Ĕuid

Setting the wiping speed for the position

Washing and wiping (spring-loaded position)

WARNING

Risk of an accident!

Depending on the vehicle equipment, the wind-

▶ Use windscreen washer Ĕuid that is suitable for the

screen washer nozzles of the windscreen can be

weather conditions.

heated automatically.

NOTICE

Clean headlights

Risk of damage to the windscreen washer system!

When the headlights are switched on, they are

▶ When refilliÄ£ the washer Ĕuid, do not remove the

cleaned the first time and after every tenth wash of

strainer from the neck of the container.

the windscreen. Setting the spray interval can be

NOTICE

carried out by a specialist garage.

Risk of damage to the headlights!

▶ Only use washer Ĕuid that does not attack polycar-

bonates.

Lighting, windscreen wipers and washers › Windscreen wipers and washers

NOTICE

› Within 10 seconds,

Risk of damage to engine compartment compo-

press the control lever

nents!

down and hold for

▶ Close the container after refilliÄ£ the windscreen

about 2 seconds.

washer Ĕuid.

The windscreen washer tank is located in the engine

compartment » page 12.

The container can hold a volume of 3 litres and 5 li-

tres for vehicles with a headlight cleaning system.

For some countries where vehicles have the head-

Replace the windscreen wiper blade

lamp cleaning system, the volume is 7 litres.

CAUTION

› Open the engine compartment lid » page 197.

Risk of accident!

› Gently open the top of the sealing cap.

▶ Change the windscreen wiper blades once or twice

› Top up the windscreen washer Ĕuid.

a year.

› Close the sealing cap of the tank.

› Fold the windscreen wiper arm away from the

windscreen.

Troubleshooting

› Press the catch and re-

move the wiper blade.

Windscreen washer Ĕuid level too low

› Insert the new wiper

illuminates together with

blade until it clicks into

place.

› Fold the windscreen

illuminates together with

wiper arm back onto

the windscreen.

› Top up the windscreen washer Ĕuid.

› Turn on the ignition

and push the control

Frozen windscreen wipers

lever down.

› Carefully remove frozen windscreen wipers from

the windscreen before switching on the ignition

and free them from snow and ice.

Folding down windscreen wiper arms and

replacing windscreen wiper blades

For folding down the windscreen wiper from the

screen you must first adjust the wiper arms to the

folded position.

NOTICE

Risk of damage to the windscreen wipers and the

engine compartment lid!

▶ Close the bonnet before lowering the wiper arms

from the window.

▶ Do not turn on the ignition when the windscreen

wiper arms are folded away.

Set the windscreen wiper arms into the folding po-

sition

› Switch the ignition on and off again.

Heating and air conditioning system › Manual air conditioning

Heating and air conditioning

Switch auxiliary heating and ventilation

oÄ/off » page 60, Usage

system

Cooling system

Manual air conditioning

When the cooling system is switched on, the tem-

perature and humidity in the vehicle will drop.

What you should be mindful of

Switching on the cooling system prevents the win-

▶ We recommend keeping the interior temperature

dows from misting up.

no more than 5 ° C lower than the outdoor tem-

After pressing the

button, the indicator light

perature.

in the button illuminates, even if the conditions for

▶ We recommend switching the cooling system off

switching on the cooling system are not met. The

about 10 minutes before the end of the journey to

cooling system switches on when the conditions for

prevent odour formation.

switching on the cooling system are met.

▶ Annual disinfection of the air conditioning is rec-

ommended.

Automatic activation of the cooling system

Automatic activation of the cooling system prevents

WARNING

the windows from misting up. The system switches

Danger of misting!

on in the following cases.

▶ Always keep the fan on.

▶

When the fan is on and the air distribution control-

WARNING

ler is in the

position.

Risk of accident!

In recirculation mode, there is no fresh air supply

In this case, the recirculation mode is switched off.

from the outside. This can result in loss of driver at-

▶ When the air distribution controller is not in the

tention and fogging up of windows.

position, and recirculated air mode is switched on.

▶ Keep the recirculation mode switched on for a

Recirculated air mode

short time only.

The recirculation mode prevents contaminated out-

side air getting into the interior of the vehicle.

Operating conditions for the cooling system

BrieĔû switching on recirculation mode can increase

the cooling effet.

✓ Outside temperature above 2 ° C

Under certain circumstances, the recirculation

✓ Running engine

mode may be switched on or off automatically.

✓ Fan switched on

When the air conditioner is operating, the engine

idle speed may increase automatically.

Overview of the controls for the manual air

conditioning

Troubleshooting

Water under the vehicle

When the cooling system is switched on, water can

drip off the air conditioning system. This is not a leak.

Fogging

›

Increase the blower speed, switch on the cooling

system, and set the air distribution to the wind-

screen.

Set the temperature

Automatic sõitch-off of the cooling system

Set the blower speed

If the coolant temperature is too high, the cooling

Set the direction of the air outlet

system may switch off automatically. This ensures

suffiieÄt engine cooling.

Switch the seat heating oÄ/off » page 63, Oper-

ation

Switch the cooling system oÄ/off

Switch oÄ/off the windscreen heat-

ing » page 62, Operation

Switch recirculated air mode oÄ/off

Heating and air conditioning system › Climatronic automatic air conditioning system

Climatronic automatic air conditioning

Switching off the function takes about 30 mi-

nutes.

system

Interior temperature sensor

What you should be mindful of

Switch the seat heating or ventilation

▶ We recommend keeping the interior temperature

oÄ/off » page 63, Operation

no more than 5 ° C lower than the outdoor tem-

Switch recirculated air mode oÄ/off

perature.

The recirculation mode prevents contaminated

▶ We recommend switching the cooling system off

outside air getting into the interior of the vehi-

about 10 minutes before the end of the journey to

cle.

prevent odour formation.

Switch the windscreen ventilation/defrosting

▶ Annual disinfection of the air conditioning is rec-

mode oÄ/off

ommended.

Switch oÄ/off the windscreen heat-

WARNING

ing » page 62, Operation

Danger of misting!

Switch oÄ/off the windscreen heat-

▶ Always keep the fan on.

ing » page 62, Operation

WARNING

Operate Climatronic in the Infotainment sys-

Risk of accident!

tem

In recirculation mode, there is no fresh air supply

Switch maintenance of the interior tempera-

from the outside. This can result in loss of driver at-

ture oÄ/off according to the temperature set-

tention and fogging up of windows.

ting for the driver's side

▶ Keep the recirculation mode switched on for a

short time only.

Press - Switch on automatic mode

This function keeps the temperature constant

and prevents the windows from misting.

Operating conditions for the cooling system

Hold - Maintain the interior temperature in ac-

cordance with the temperature setting for the

✓ Outside temperature above 2 ° C

driver side (SYNC function)

✓ Running engine

✓ Fan switched on

Switch the cooling system oÄ/off

When the cooling system is switched on, the

temperature and humidity in the vehicle will

Operation

drop.

Switching on the cooling system prevents the

windows from misting up.

The rear temperature can also be set on the dis-

play in the centre console at the rear.

With a temperature setting outside of the number

range, one of the following icons will be displayed in

the Climatronic display:

Set the temperature for the left side

Maximum cooling power

Maximum heating power

Set the temperature for the right side

Set the direction of the air outlet

When the air conditioner is operating, the engine

idle speed may increase automatically.

Set the blower speed

Set the temperature for the left side

Settings

Set the temperature for the right side

Depending on the equipment:

Display the settings menu

› Tap the

button on the Climatronic.

▶ Switch auxiliary heating and ventilation

oÄ/off » page 60, Usage

Or:

▶

Use of residual engine heat for maintain-

› Tap on

in the Infotainment screen.

ing heat in the vehicle interior

It is possible to switch on within 30 minutes

of switching off the ignition.

Heating and air conditioning system › Auxiliary heating and ventilation

▶ Automatic air recirculation - Automatic air circulation mode

oÄ/off

▶ Automatic supplementary heater - Switch fast interior heating

oÄ/off

▶ Automatic windscreen heating - Switch oÄ/off the automatic

windscreen heating

Troubleshooting

Water under the vehicle

Select Climatronic mode

When the cooling system is switched on, water can

Set the direction of the air outlet in manual

drip off the air conditioning system. This is not a leak.

mode

Fogging

Set the temperature for the left side

› Switch on automatic mode.

Set the temperature for the right side

Or:

Show the front settings menu

› Increase the blower speed, switch on the cooling

Show the back settings menu

system, and set the air distribution to the wind-

screen.

Switch the cooling system oÄ/off

When the cooling system is switched on, the

Automatic sõitch-off of the cooling system

temperature and humidity in the vehicle will

If the coolant temperature is too high, the cooling

drop.

system may switch off automatically. This ensures

suffiieÄt engine cooling.

Switching on the cooling system prevents the

windows from misting up.

Switching the windscreen heater

Auxiliary heating and ventilation

oÄ/off » page 62, Operation

According to the selected Climatronic mode:

Usage

▶ Manual mode - Set the blower speed

The auxiliary heater heats the vehicle interior and the

▶ Automatic mode - Set the operating power

engine.

Switch maintenance of the interior temperature

The auxiliary ventilation makes it possible to supply

oÄ/off according to the temperature setting for

fresh air to the vehicle interior when the engine is

the driver's side

switched off. As a result, the interior temperature is

The Air Care function reduces the penetration

lowered, e.g. when the vehicle is parked in the sun.

of pollutants into the vehicle interior. At the

same time, the air is both circulated and

What you should be mindful of

cleaned.

The air purifiatioÄ process is displayed in the

DANGER

Infotainment.

Risk of poisoning!

For proper operation, the doors and windows

▶ The auxiliary heater must not be operated in en-

must be closed.

closed spaces.

› To switch oÄ/off Active .

DANGER

Switch auxiliary heating and ventilation

Risk of fire!

oÄ/off » page 60, Usage

▶ Switch off the auxiliary heater before refuelling.

Lock increases in heat output for the rear seat

▶ The exhaust pipe for the auxiliary heater is located

heater » page 63, Settings

on the underside of the vehicle. Therefore, do not

The function is displayed after tapping the func-

stop the vehicle in places where the exhaust gases

tion surface F .

could come into contact with easily Ĕammable ma-

terials, e.g. dry grass, spilled fuel etc.

Further Climatronic settings

› To make further settings, press the

button on

Functionality

the Climatronic

, tap on in the Infotainment

screen.

The system heats or ventilates the vehicle interior

depending on the temperature settings of the air

Heating and air conditioning system › Auxiliary heating and ventilation

conditioning system and the air outlet nozzles before

Show menu for vehicles with Climatronic

the ignition is switched off.

› Press the button

on the Climatronic control

panel

, tap

in the Infotainment screen.

The system consumes fuel from the fuel tank when

operating the heating.

Settings and information in the Infotainment

screen

Operating conditions

✓ The charge state of the 12-volt vehicle battery is

suffiieÄt.

✓ The fuel supply is suffiieÄt, the instrument clus-

ter does not light up

Operation

Switch oÄ/off with the radio remote control

Day and time when the vehicle is to be ready for

› Hold down the corresponding key.

use

Indicator light

Setting the heating/ventilation

Antenna

List of pre-selected times, activation / deactiva-

tion of the preset time

Switching off

Set the selected choice of time and the duration

Switching on

(10-60 minutes)

Immediate switch-on

When the heating is running, the windows are

displayed in red

When ventilation is running, the windows are

Hold the radio remote control with the antenna

displayed in blue

facing upwards.

NOTICE

▶ Protect the remote control from moisture, strong

vibrations and direct sunlight.

Display of the radio remote control indicator light

▶ Lit up green for 2 seconds - switch on

▶ Lit up red for 2 seconds - switch off

Range of the radio remote control

The range of the wireless remote control is a few

hundred meters when the battery is full. For exam-

Currently displayed preset time

ple, obstacles or weather conditions can reduce the

Activation of the currently displayed preset time

range.

Setting the departure time

Switching oÄ/off via the control panel of the air

conditioning system

When automatic switching on is activated, the warn-

› Press the button.

ing light in the button lights up after the ignition is

turned off.

Only one preset time can be active. The activated

Set automatic switching on

preset time will be deactivated again after it has

Show the menu for vehicles with manual air condi-

started automatically. To start the next preset time,

tioning

this preset time must be activated.

The automatic switching on is set in the following

When selecting the day in the preset time, there

menu in the Infotainment system.

is an option between Sunday and Monday without

the speified day. When this position is selected, the

system is switched on at the next set time.

Or:

Heating and air conditioning system › Heated windscreen

Troubleshooting

› Use a screwdriver to

loosen the battery in

Smoke in the engine compartment

the marked area.

In the engine compartment, smoke and odours may

› Replace the battery.

form during the operation of the auxiliary heater.

› Insert the cover and

This is not a defect.

push it until it audibly

Running the auxiliary heater after stopping the en-

locks into place.

gine

After switching off the system, the coolant pump

and the auxiliary heating will continue running a little

while longer in order to burn the remaining fuel in

the heating.

Heated windscreen

Indicator light in the radio remote control

▶ Flashes green in a slow sequence - the switch-on

Usage

signal was not received

Windscreen heating is used for defrosting or venti-

▶ Flashes red in a slow sequence - the sõith-off sig-

lating the windscreen.

nal was not received

▶ Flashes green in an irregular pattern - the parking

heater is locked, e.g. because the fuel tank is al-

Requirements

most empty or there is an error

✓ Running engine

› Check the level of fuel.

✓ Outside temperature approximately below 35 ° C

› If the fuel quantity is OK, seek the help of a spe-

cialist company.

▶ Lights up orange first, then green/red - the battery

Operation

is weak, the oÄ/off signal has been received

Heated rear window

▶ Lights up orange first, then Ĕashes green/red - the

› Press the button.

battery is weak, the oÄ/off signal has not been re-

ceived.

Heated windscreen

▶ Flashing orange - the battery is nearly discharged,

› Tap the button on the Climatronic.

the oÄ/off signal has not been received

Or:

▶ Not lit up - the battery is discharged, the oÄ/off

› Press the key

on the Climatronic

, tap in

signal has not been received

the Infotainment screen.

› Replace the battery.

Windscreen heating switches off automatically after

some time.

Change the battery in the remote control

If the engine is switched off when the heating is on

and turned back on again within about 10 minutes,

WARNING

the heating is continued.

Risk of death!

If the battery is swallowed, serious or even fatal inju-

ries can result from burns in the digestive tract.

Settings

▶ Always keep children away from the radio remote

control and batteries.

Automatic heated windscreen

▶ If the battery is swallowed, seek medical help im-

The heated windscreen switches on automatically if

mediately.

the windscreen mists up.

› Use a thin screwdriver

› Press the button

on the Climatronic control

to remove the cover in

panel

, tap

in the Infotainment screen.

the marked area.

Or:

› Open the cover and

› Tap on

in the Infotainment screen.

push it out.

Heating and air conditioning system › Seat heating and ventilation

Troubleshooting

If the seat heating and ventilation functions are

both switched on at the same time, the heating out-

The indicator light in the button or below the but-

put/ventilation level can only be adjusted in the Info-

ton Ĕashes

tainment screen.

The heating does not work as the battery charging

› Press the or button in the rear centre console

level of the 12 volt vehicle battery is too low.

to switch on the rear seat heating.

The heating is switched on with maximum heating

Seat heating and ventilation

output. By repeatedly pressing the button, the

heating output is reduced until it is switched off.

What you should be mindful of

Display heating output/ventilation level in the but-

WARNING

ton

Risk of burns!

Seat heating switched on

▶ Do not switch on the seat heater for persons with

Seat ventilation switched on

limited perception of pain or temperature.

Seat heating and ventilation switched on

NOTICE

If the engine is switched off with the heating/ventila-

Risk of seat damage!

tion switched on and then started again within ap-

▶ Do not kneel on the seats or otherwise apply con-

proximately 10 minutes, the heating/ventilation will

centrated pressure to them.

continue according to the setting before the engine

▶ Do not turn on the heater in the following situa-

was switched off.

tions:

▶ The seat is not occupied.

▶ There are objects on the seat, such as a child

Settings

seat.

Lock increases in heat output for the rear seat

▶ There are additional seat covers or protective

heater

covers on the seat.

› To turn the function on or off, press the

but-

ton on the Climatronic

in the Infotain-

ment screen.

Requirements

Or:

✓ Running engine

› Tap on

in the Infotainment

screen.

Operation

When the function is switched on, the heating out-

put can only be turned down.

Depending on the equipment, the front seats can be

heated or heated and ventilated. The outer rear seats

The function also blocks the possibility of setting

can only be heated.

the temperature in the display in the rear centre con-

sole.

Models without seat ventilation

› Press the or button on the Climatronic to

switch on the front seat heating.

Heated steering wheel

› Press the or button in the rear centre console

to switch on the rear seat heating.

Requirements

The heating is switched on with maximum heating

✓ Running engine

output. By repeatedly pressing the button, the heat-

ing output is reduced until it is switched off.

The output level of the heating is indicated by the

Operation

number of illuminated indicator lights in the button

› Press the button on the multifunction steering

or in the Infotainment screen.

wheel.

Models with seat ventilation

The heating is switched on with maximum heating

› Tap the or function surface to turn on front

output. By repeatedly pressing the button, the heat-

seat heating.

ing output is reduced until it is switched off.

The Infotainment screen displays a menu for oper-

ating the front seat heater and ventilation.

› Adjust the heating output/ventilation level.

Driver information system › Analogue instrument cluster

Driver information system

Outside temperature

- low outside temperature

Analogue instrument cluster

Total distance travelled

Overview

Trip - Distance travelled after resetting the

memory

Overview of instrument cluster

Overview of the main menu items

▶ Driving data » page 66, Overview

▶ Assist systems - Activate/deactivate assist sys-

tems

▶ Navigation - e.g. Display driving recommendations,

compass, list of destination

▶ Audio - Using radio and media

▶ Telephone - Call list, accept or reject an incoming

call

▶ Vehicle - Vehicle condition » page 68, Display.

Tachometer with indicator lights

▶ Lap timer - Stopwatch » page 68, Usage.

Display

Speedometer with indicator lights

Operation

Bar with indicator lights

Operation via the control lever

Multifunction button:

Press - Switch be-

▶ Setting the time

tween menu

▶ Reset odometer (trip)

items/set values

▶ Show distance and days until next service ap-

Hold - Show main

pointment

menu

Coolant temperature gauge

Press - oÄfirm the

menu item

Fuel gauge

Operation via the multifunction steering wheel

NOTICE

Turn - Switch be-

Risk of serious damage to the engine and the ex-

tween menu

haust system!

items/set values

▶ Never run the fuel tank completely empty!

Press - oÄfirm the

In poor visibility and with dipped headlights off,

menu item

the brightness of the instrument cluster lighting is

Press - Return to the

reduced to remind the driver to turn on the light.

menu one level high-

Display overview

Depending on the equipment, the following informa-

Hold - Show main

tion is shown in the display.

menu

Press - Show previous menu (if one has been se-

Time

lected) / Show telephone menu

Selected gear/gear

recommendation

Also included de-

Settings

pending on vehicle

Setting the language

equipment:

The language is set in the Infotainment in menu

▶ Compass direction

display

▶ Automatic gearbox

Resetting the odometer

selector lever posi-

› BrieĔû press the button in the instrument

tions

cluster.

▶ Detected road signs

Menu, indicator lights and information

Driver information system › Digital instrument cluster

Setting the time

Overview of the main menu items

▶ Driving data » page 66, Overview

› Press and hold the button in the instru-

ment cluster until the menu item Time is

▶ Assist systems - Activate/deactivate assist sys-

displayed.

tems

▶ Navigation - e.g. Display driving recommendations,

› Release the button, the display shows the hour set-

ting.

compass, list of destination

▶ Audio - Using radio and media

› Press the button repeatedly to set the hours.

› Wait 4 seconds, the display shows the minute set-

▶ Telephone - Call list, accept or reject an incoming

ting.

call

▶ Vehicle - Vehicle condition » page 68, Display.

› Press the key repeatedly to set the minutes.

› Wait 4 seconds, the display shows the initial set-

▶ Lap timer - Stopwatch » page 68, Usage.

ting.

The time is also set in the Infotainment in menu

Operation

Rotate - Switch be-

Setting the brightness of the instrument cluster

tween menu

lighting

items/Set values/

The brightness of the instrument lighting is adjusted

Manually change

automatically according to the given lighting condi-

map scale

tions.

Press - oÄfirm the

When low beam is switched on, the brightness of

menu item

the instruments lighting can be adjusted in the fol-

Turn and press - Ac-

lowing menu in the Infotainment system:

tivate automatic

map scale changing

Or:

Press - Return to the menu one level higher

Hold - Show main menu

Press - Change the variant of the display

Hold - Display the menu of preset options with

Digital instrument cluster

additional information

Overview

Settings

Overview of instrument cluster

Setting the language

The language is set in the Infotainment in menu

Resetting the odometer in the instrument cluster

›

Select Trip in the menu in instrument cluster display.

Turn - Select infor-

mation

Press - oÄfirm in-

formation

Hold - Reset counter

Bar with indicator lights

Coolant temperature gauge

Fuel gauge

Display

Additional information

Setting the time

The time is set in the Infotainment in menu

Central display area

Setting the brightness of the instrument cluster

NOTICE

lighting

Risk of serious damage to the engine and the ex-

The brightness is adjusted automatically according

haust system!

to the given lighting conditions.

▶ Never run the fuel tank completely empty!

Driver information system › Driving data

The brightness is adjusted with the dipped beam

Or:

switched on in the infotainment in the following

Menu item for the virtual cockpit

menu:

Or:

Set the variant of the display

› Press the button on the multifunction steering

wheel to change the variant of the display presen-

tation.

Select displayed variants

› Select the desired additional information in the A

› Press and hold the button on the multifunction

areas.

steering wheel.

› The desired function area for the preselection op-

› Select and oÄfirm the menu item for the display

tion in the area B hold to save the selection (the

variants.

scope of the preset options depends on the type

› Select one of the following variants of the display

of Infotainment).

and oÄfirm.

Driving data

Overview

The driving data display works with the ignition

switched on.

In the instrument cluster display

Depending on the equipment, the display of the in-

strument cluster shows information such as speed,

fuel consumption, range, etc.

In Infotainment

Classic display

Advanced display

Modern display

Basic display

Sporty display (depending on equipment)

Choose display of additional information

› Press and hold the button on the multifunction

steering wheel.

› Select and oÄfirm one of the following prefix op-

Distance travelled

tions (the scope of the prefix options depends on

Driving time

the type of Infotainment):

Average speed

▶ Auto - Information depending on the selected

driving mode

Average fuel consumption

▶ Classic - Information about the selected gear

Evaluation of driving economy - Drive-

and the current speed

GreenFunction (depending on Infotainment

▶ Adjustable pre-selection options.

type) » page 173

Setting the pre-selection option for the display of

Graphical fuel gauge - If the expected range is

additional information

less than 300 km, the vehicle slowly approaches

The pre-selection option for displaying additional in-

the symbol

formation is set in the Infotainment system in the

Range

following menu:

Menu item for the virtual cockpit

Driver information system › Driving data

Memory

Select and reset the memory for driving data in

The system saves the driving data in the following

the display of the instrument cluster using the

memories:

control lever

Since start

› To select the memory

▶ Driving data from the time of switching on the ig-

for the displayed driv-

nition until the ignition is switched off again is stor-

ing data, press button

ed in the memory. If the journey is interrupted for

A repeatedly.

more than 2 hours, the memory will be reset.

› To reset the memory,

Long-term

press and hold button

▶ The driving data of all trips up to a total of 99

hours and 59 minutes driving time or 9999 km

Select memory for driving data in the display of

driving distance is stored in the memory. If one of

the instrument cluster via the multifunction steer-

the listed values is exceeded, the memory is reset.

ing wheel and reset it

Since refuel

› To select the memory

▶ Driving data from the time the fuel tank was last

for the displayed driv-

filled is stored in the memory. The memory is reset

ing data, press control

the next time the tank is filled.

wheel A repeatedly.

› To resetthe memory,

Operation

hold the dial A .

Display driving data in the display of the instru-

ment cluster via the operating lever

› Select the menu item for the driving data in the

main menu in the instrument cluster display.

Selecting the memory in the infotainment system

Press - Select infor-

To select the memory, use the functional areas

mation/Set values

in the following menu in the infotainment system:

Press - oÄfirm in-

Menu item for driving data

formation

Or:

Menu item for the driving data

Display driving data in the display of the instru-

ment cluster via the multi-functional steering

Resetting the memory in the infotainment system

wheel

The memory is reset in the following menu in the in-

› Select the menu item for the driving data in the

fotainment system:

main menu in the instrument cluster display.

Rotate - Select in-

Or:

formation/Set values

Press - oÄfirm in-

formation

Settings

Select driving data to be displayed

The driving data to be displayed is selected in the

following Infotainment menu:

Displaying driving data in the infotainment system

The driving data is displayed in the following menu in

Or:

the infotainment system:

Menu item for driving data

Setting units

Or:

The units are set in the following infotainment menu:

Menu item for the driving data

Or:

Driver information system › Speed limit warning

Speed limit warning

▶

Activation/deactivation of information

regarding the messages of the START-STOP

Usage

system in another screen display

The system offers the possibility to set a speed limit

beyond which an acoustic warning signal will sound

Functionality

and the following warning message appears in the

display of the instrument cluster.

In the event of a system fault, messages regarding

the fault in question are displayed on the instrument

cluster display when the ignition is switched on.

Settings

Messages in relation to faults can also be displayed in

Setting the speed limit

the Infotainment.

› Select Warning at or

(depending on the display type)

The warning messages will continue to be dis-

and oÄfirm.

played until the malfunctions have been remedied.

› When the vehicle is stationary, set the desired

After the first display of the message, only the indi-

speed limit and oÄfirm.

cator lights

(Hazard) or

(Warning) are dis-

› While driving, drive at the desired speed and con-

played.

firm it as the speed limit.

Resetting the speed limit

Stopwatch in the instrument cluster

› Select Warning at or

(depending on the display type)

and oÄfirm.

Usage

› To reset the speed limit, oÄfirm the stored value.

The function Laptimer offers the possibility to use up

If the journey is interrupted for more than 2 hours,

to 11 lap times, e.g. when driving on a race track, to

the set limit is deactivated, but the set value remains

measure and display in the display of the instrument

stored.

cluster.

Vehicle status

Operation

Display

› Select Lap timer in the main menu in the instrument

cluster display.

The vehicle status is displayed in the following menu

in the infotainment system:

Displaying functions via the multifunction steering

Menu item for the vehicle status

wheel

Or:

Rotate - Select in-

formation/Set values

Menu item for the vehicle status

Press - oÄfirm in-

formation

Displaying functions via the control lever

Press - Select infor-

mation/Set values

Vehicle areas displayed in colour indicate associ-

Press - oÄfirm in-

ated warnings

formation

No ÄotifiatioÄ

Warning messages regarding the vehicle con-

Overview of functions

dition and their quantity

▶ Start time - start the timing manually / continue

Display of information about the condition

the interrupted measurement

of the START-STOP system

▶ Since start - Start the timer automatically upon

start-up

Driver information system › Stopwatch in the Infotainment

▶

Statistics - Evaluate and reset the measured times

Information Sport

▶ Fastest - the fastest lap

Settings

▶ Slowest - the slowest lap

▶ Average - the average lap time

The Sport information is displayed in the following

▶ Overall time - the total of all the lap times

menu in the infotainment system:

▶ Reset - reset all measured times

Sport

▶ New lap - Start measurement of the next lap time

Or:

▶ Split time - show the split time

Sport

▶ Stop - interrupt the time measurement

A swipe of the fiÄ£er vertically across the screen al-

▶ Continue - Continue measurement of the current

lows three of the following displays to be shown:

lap time

▶ Charging pressure

▶ New lap - Start measurement of the next lap

▶ Acceleration

time

▶ Abort lap - cancel the time without saving the

▶ Output

measured time

▶ Coolant temperature

▶ Exit - cancel the time and save the measured

▶ Oil temperature

time

Personalization

Stopwatch in the Infotainment

Usage

Overview

The personalization feature allows each vehicle key

The stopwatch display is shown in the menu in the

to be assigned a user account.

Infotainment:

In the user account, settings can be assigned regard-

Sport

ing e.g. light function, driver's seat and exterior mir-

ror position, assistance systems, radio, navigation,

Or:

etc.

Sport

Functionality

After opening the driver's door, all the personalised

functions are adjusted according to the user account

that is assigned to the key which was used to unlock

the vehicle.

There are three user accounts and a guest account.

A change to the set personalised functions is auto-

matically stored in the active user account.

Overall time

Start the measurement

Change user account

Stop the measurement

WARNING

Current lap time

Risk of an accident!

Evaluate/reset split times

▶ Carry out the account change while the vehicle is

End the measurement (the current lap time is

stationary.

not stored)

In the instrument cluster display

Start measurement of the next lap time

› Switching to a differeÄt user account is

The split time is brieĔû shown in the display A

in the instrument cluster display within

10 seconds after turning on the igni-

End the measurement (the current lap time is

tion.

stored)

In Infotainment

› The system settings are made in the Infotainment

in the following menu:

Была ли эта страница вам полезна?

Да!Нет

1 посетитель считают эту страницу полезной.

Skoda Kodiaq (2021 year). Manual in english — page 3

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.