Skoda Rapid (2019 year). Manual — part 8
Enter the telephone number
List of contacts
Call list (missed calls, in addition to the function surface, the number of
calls when missed is displayed)
Starting voice control of the connected phone (e.g. Apple Siri, Google
Voice)
Menu settings for Telephone
Symbols in the status bar
Signal strength of the telephone service network
Charge status of the telephone battery
Missed call
Current call
Pairing and connecting
Introduction to the subject
To connect a telephone to the Infotainment system, the two devices must be
paired via Bluetooth
®
.
Depending on the Infotainment model, up to 20 external devices can be paired
with the device. After the maximum number is reached, the pairing of the next
external device will replace that of the device that has not been used for the
longest period of time.
Connection to an already paired telephone is established automatically after
the ignition is switched on. Or, it is sufficient to search for the phone in the list
of paired devices.
The range of the telephone connection to the Infotainment system is limited
to the passenger compartment.
Compatibility and update
By scanning the QR code
on page 88 or typing the following address
into the web browser, information about the compatibility of phones and avail-
able updates for the Infotainment's Bluetooth
®
can be displayed.
http://go.skoda.eu/compatibility
Conditions for pairing
The ignition is switched on.
The Bluetooth
®
function of the Infotainment system and the telephone is
switched on.
The visibility of the Infotainment system and the telephone is switched on.
The telephone is within range of the Infotainment system's Bluetooth
®
sig-
nal.
The telephone is compatible with the Infotainment system.
No external device is connected to the Infotainment system using Apple
CarPlay.
Pairing and connection process
Pairing the telephone with the Infotainment system
›
Find available external Bluetooth
®
devices in your telephone.
›
Select the name of the Infotainment system.
The name of the Infotainment system can be checked in the Telephone main
menu if you tap on the function surface → Bluetooth in the Name: menu item.
›
Confirm the PIN code (enter and confirm if necessary).
The telephone is connected to the Infotainment or just paired, depending on
the number of external devices that are already connected
Pairing the Infotainment system with the telephone
›
If no telephone is connected to the Infotainment system, press the
but-
ton, then tap the Find telephone function surface or press the
button, then
tap function surface → Find mobile phone.
›
If one telephone is connected to the infotainment system, then, in the Tele-
phone main menu, tap on the
→ Find telephone function surface.
›
Select the desired telephone from the list of retrieved external Bluetooth
®
devices.
›
Confirm the PIN code (enter and confirm if necessary).
WARNING
Do not pair and connect a telephone to the Infotainment system while driv-
ing the vehicle - there is risk of an accident!
124
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Possible connection types
Depending on the number of connected Bluetooth
®
devices and the connec-
tion type, the following functions are available.
Applies to Infotainment Amundsen
First device (main telephone)
Second device (additional tele-
phone)
HFP (incoming/outgoing calls), SMS,
telephone contacts,
Bluetooth
®
player
HFP (incoming calls),
Bluetooth
®
a)
Only one external device can be connected to the Infotainment system as a Bluetooth
®
player.
Applies to Infotainment Swing
First device (main telephone)
Second device (additional tele-
phone)
HFP (incoming/outgoing calls),
telephone contacts,
Bluetooth
®
player
Bluetooth
®
a)
Only one external device can be connected to the Infotainment system as a Bluetooth
®
player.
Managing paired external devices
›
In the main Telephone menu, tap the function surface → Bluetooth → Paired
devices.
In the list of paired external devices, the following symbols may appear for the
individual external devices.
Applies to Infotainment Amundsen
Symbol
Symbol
colour
Function
Grey
External device can be connected as a telephone
Green
External device is connected as a telephone
Grey
External device can be connected as a Bluetooth
®
player
White
External device is connected as a Bluetooth
®
player
Applies to Infotainment Swing
Symbol
Symbol
colour
Function
White
External device can be connected as a telephone
Green
External device is connected as a telephone
White
External device can be connected as a Bluetooth
®
player
Green
External device is connected as a Bluetooth
®
player
Connection set-up
▶
Select the desired external device from the list of paired external devices.
▶
Select the desired profile from the list of available Bluetooth
®
profiles.
If external Bluetooth
®
devices are already connected to the Infotainment sys-
tem, then the Infotainment system will display messages and options for the
possible connection type (e.g. replacement of the connected external Blue-
tooth
®
device) during the connection process.
Disconnection
▶
Select the desired external device from the list of paired external devices.
▶
Select the desired profile from the list of available Bluetooth
®
profiles.
Deleting the paired external device
▶
To delete, tap on one of the following function surfaces.
- Delete all external devices
- Delete the desired external device
▶
Confirm the deletion by tapping on the function surface Delete.
Telephone functions
Enter telephone number and select
Entering a telephone number and dialling
›
In the main Telephone menu, tap the function surface .
Function surfaces of the numeric keypad
Enter the last dialled number/dial the telephone number entered
Emergency call (only applies to some countries)
Breakdown call in case of breakdown
Delete all or All areas
125
Telephone
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Information call (for information regarding the products and services of
the ŠKODA brand)
Choose the mailbox number (the function is not supported for Infotain-
ment Swing)
Delete the last number entered
Display the function surfaces for the movement of the cursor in the
input line
Searching for a contact using the numeric keypad
The numeric keypad can also be used to search for a contact.
For example, if you enter 32, the unit will display contacts with the letter se-
quence DA, FA, EB, etc. next to the numeric keypad.
Voicemail box (does not apply to Infotainment Swing)
▶
To select the voice mailbox number, tap the function surface .
If the voicemail number was not imported or entered, then this can be entered
or changed as follows.
▶
In the main Telephone menu, tap the function surface → User profile → Mail-
box number:.
▶
Enter the number of your voice mailbox.
List of telephone contacts
Fig. 142 List of telephone contacts / contact details
›
In the main Telephone menu, tap the function surface and a list of tele-
phone contacts will be displayed
If the main telephone is connected to the Infotainment system, the telephone
contacts from the telephone are used.
Function surfaces
Contact search
Dial a number in the telephone contact list (if a telephone contact contains
several telephone numbers, a menu containing the telephone numbers as-
signed to this contact is displayed after the contact is selected)
Display the contact details
Select the telephone number in the contact details
Edit the telephone number of the contact before dialling
Infotainment Amundsen:
The contact name can be read out by the Infotainment system’s generated
voice
Open the menu for sending a text message (SMS)
Infotainment Amundsen:
Start the route guidance to the contact address
Import list
After the main telephone is connected to the Infotainment system for the first
time, the process for importing the telephone contacts into the device memo-
ry starts. The import can take several minutes.
The Infotainment system's telephone book contains 2000 free memory loca-
tions for imported telephone contacts. Each contact can contain up to 5 tele-
phone numbers.
The number of imported contacts can be determined in the menu item →
User profile → Import contacts: or Import contacts.
If an error occurs during the import, a corresponding message appears on the
screen.
Refresh list
When the telephone reconnects with the Infotainment system, the list is auto-
matically updated.
The list can be refreshed manually as follows.
▶
In the main Telephone menu, tap the function surface → User profile → Import
contacts: or Import contacts.
A
B
C
126
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Management of preferred contacts (favourites)
Fig. 143
Favourite contacts
Assigning favourites
›
In the main menu Telephone, tap on the desired function surface
A
›
Select the desired contact (if required, one of the contact numbers).
Connecting to a favourite
The function surfaces for preferred contacts allow you to dial the contact tele-
phone numbers immediately.
The favourites are provided in two storage groups.
›
To the change Storage Group tap on the functional surface
B
.
›
To choose tap on the assigned function area
A
.
Changing allocated favourites
›
In the main Telephone menu, press and hold the desired function surface
A
.
›
Select the desired contact (if required, one of the contact numbers).
Deleting a favourite
›
In the main Telephone menu, tap the function surface → User profile → Man-
age favourites.
›
Tap the desired function surface of the preferred contact and confirm the
deletion.
You can delete all contacts by tapping on the function surface Delete all / All
areas and confirming the delete process.
Function surface for emergency call
If the vehicle is not equipped with the buttons for the Care Connect service
, the position of the last function surface in the first group of favour-
ites will show the function surface for an emergency call is displayed in the
status bar. In some countries, this function may not be available.
The function surface can be assigned a different number for the preferred
contact.
To restore the emergency number, it is necessary to remove the telephone
from the list of paired external devices
nect again.
Call list
Fig. 144 Call history / Contact details
›
In the main Telephone menu, tap the function surface and a call list will be
displayed
.
The call list can also be displayed during a telephone call.
Function surfaces
Set the display depending on the type of call
▶
All areas - List of all calls
▶
Missed calls/Missed calls - List of missed calls
▶
Dialled numbers - List of dialled numbers
▶
Received calls / Received - List of received calls
Dial the contact number/telephone number
Call type symbols
▶
- Answered call
▶
- Outgoing call
▶
- Missed call
Edit the telephone number before dialling (not applicable to Infotainment
Swing)
Display the contact details
▶
C
- Dial the contact number
A
B
127
Telephone
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Telephone call
Depending on the conversation context, the following functions can be carried
out.
End dialling/reject incoming call/end call
Accept an incoming call/return to a held call
Switch ring tone on/off
Keep talking
Switch microphone on/off
Infotainment Amundsen:
Set up a conference call
Show caller details (if the contact is stored in the list)
Switch hands-free on/off (call to the telephone/switch to Infotainment)
▶
To deactivate the hands-free system, go to the main Telephone menu and tap
on the function surface Tap on hands-freeduring a call.
▶
To activate the hands-free system, tap on the function surface during a
call.
Conference call
Applies to Infotainment Amundsen.
The conference call is a shared call with between three and six participants.
Start a conference call/invite additional participants
›
Make the next call during a call/conference call.
›
or: Take the new incoming call by tapping the function surface
.
›
To initiate a conference call or return to a conference call, tap on the func-
tion surface .
Ongoing conference call
During an ongoing conference call, the call duration is displayed on the screen.
Depending on the context, the following functions can be selected.
Hold a conference call - Leave the conference call temporarily (the con-
ference call continues in your absence)
Return to the held conference call
Switch microphone on/off
End conference call
Display conference call details
Conference call details
▶
During the ongoing conference call, tap the function surface .
A list of other conference participants is displayed. The following functions
can be selected depending on the type of telephone.
Display participant details
Talk to a participant separately, outside of the conference call
End the call to a conference call participant
Text messages (SMS)
Main menu
Applies to Infotainment Amundsen.
Fig. 145
Text messages main menu
›
In the main Telephone menu, tap the function surface The main menu for
text messages appears
Depending on the type of telephone connected, you can perform the following
functions.
Open a list of templates for quick answers
New text message - Create and send the message
Inbox- Open a list of received messages
Sent - Open a list of sent messages
Outbox - Open a list of messages not sent
Drafts- Open a list of drafts (messages in progress)
Deleted- Open a list of deleted messages
A
128
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
New text message
Creating and sending the message
›
In the main menu of the text messages, tap on function surface inter-
face
›
Write a text message and confirm. A view of the text message is displayed.
›
Tap the function surface tap .
›
Select the recipient of the message from the displayed contact list or tap the
function surface and enter the telephone number.
›
To add additional recipients, tap the function surface .
›
To send the text message, tap the function surface .
Viewing the text message
After opening the view message function, the following functions can be exe-
cuted.
The text can be read out by the device's generated voice
The text can be stored as a draft
Open a list of templates with the option to replace the recorded text with
the selected template
Open the contact list
The message can be edited, provided the text area is within the view.
Contact list
After the list has been opened the following functions can be executed.
Add a contact to the recipient list
Enter the telephone number
Return to message view
Tap on the Find function surface to open a list of available telephone contacts.
After selecting the contact number or entering the telephone number, the re-
cipient list will be displayed in the screen.
Recipient list
The following functions can be executed by tapping on one of the function
surfaces.
Display the contact list with the option of adding/removing additional
recipients (to return to the recipient list, tap the function surface .
Remove a contact from the recipient list
Send the message
Return to message view
Received text message
When you receive a new message, the number of new messages received is
displayed within the function surface and at the same time the icon in the
status bar is displayed in the status bar.
›
To open a list of received messages, go to the Telephone main menu and
tap on function surface → .
›
Select a message.
The message content and the following menu is displayed.
The text can be read out by the device's generated voice
Display a menu with additional options
▶
Reply with template - Reply using a template
▶
Display numbers - Recognition of telephone numbers in the message in-
cluding the contact number (recognised numbers can be dialled directly
or edited before dialling, or may be sent to this message)
Forward a message with the option to edit the message before sending
Reply to the sender via a message
129
Telephone
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Data connection
Internet connection
Connecting Infotainment Amundsen
Fig. 146 WLAN (Wi-Fi) / CarStick
Possible connection types
Using WLAN, by connecting the Infotainment system to the hot spot of
the external device
, Connect Infotainment to the hotspot of
the external device.
Using the CarStick USB device
.
Connecting via the CarStick device
Applies to Infotainment Amundsen.
The CarStick USB device can be purchased from the original accessories.
›
Insert a SIM card with activated data services into the CarStick device.
The required dimensions of the SIM card, as well as the correct procedure dur-
ing insertion can be found in the instructions enclosed with the CarStick ŠKO-
DA original accessory.
›
Switch on the ignition and the Infotainment system.
›
Insert the CarStick into the USB input at the front
›
Wait approximately one minute until the red light on Carstick stays continu-
ously lit (if the red lights up, then disconnect and re-insert the Carstick).
A
B
›
If the SIM card is protected by a PIN code, then the PIN code of the SIM card
must be entered.
›
Confirm the entered PIN code by tapping confirm.
›
or: Tap the functional surface to save and confirm the PIN code.
›
If necessary, set the required network of the data service provider.
If your data provider is not available in the list, ask your provider whether one
of the displayed providers can be used.
The parameters of the telephone service provider network can be set in the
menu item
→ → Network → Network settings.
CAUTION
If you insert a SIM card of the wrong size or in the wrong direction, there is a
risk of damage to the CarStick device.
Connecting via WLAN
Introduction to the subject
Applies to Infotainment Amundsen.
WLAN can be used to connect to the Internet, to playback audio files in the
menu media or for operating the Infotainment system using an application in
the external device (e.g. “ŠKODA Media Command”).
It is possible to connect up to 8 external devices to the Infotainment hotspot
and at the same time to connect Infotainment to another hotspot.
Switching the Infotainment hotspot on/off
›
Switch on the ignition.
›
Switch the hotspot on/off in menu item
→ → WLAN → Mobile hotspot →
Mobile hotspot.
Setting the Infotainment hotspot
The Infotainment hotspot is factory set.
The setting can be changed in menu item
→ → WLAN → Mobile hotspot →
Hotspot (WLAN) settings.
■
Security level: - Type of access protection (always set to WPA2)
■
Network key - Access password
130
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
■
SSID: ... - Hotspot name
■
Do not send network name (SSID) - Switch the visibility of the hotspot on/off
▶
To save the configured parameters, tap the Store function surface.
Connecting an external device to the Infotainment hotspot
›
Switch on the ignition.
›
Switch on WLAN in the external device and search for the infotainment hot-
spot.
›
Select the Infotainment hotspot and enter the required password.
›
Confirm the connection.
Note
The name of the infotainment hotspot (SSID) and the access password can be
found in menu item
→ → WLAN → Mobile hotspot → Hotspot (WLAN) settings.
Connect Infotainment to the hotspot of the external device
Fig. 147
Main menu of the Infotainment
WLAN
The Infotainment system can only be connected to a hotspot with WPA2
access protection.
›
Switch on the ignition.
›
If the Infotainment WLAN is not activated, activate it in the menu item
→
→ WLAN → WLAN → WLAN.
In area
A
, a list of available or previously connected hotspots is dis-
played.
The hotspot list can be updated by tapping the function surface
B
.
›
Select the hotspot and enter the password.
If the hotspot is not visible, you can establish the connection to it manually.
›
Tap the function surface Manual settings.
›
Set the required hotspot parameters.
›
Tap on the function surface Connect.
Icons and function surfaces in the list of available hotspots
A
Connected hotspot
Signal strength of the connected hotspot
Delete the hotspot
Hotspot connection recommendations
▶
Only leave the hotspot to be connected switched on, switch off the other
hotspot.
▶
On some hotspots, the connection setup takes longer, wait for the end of
the connection setup.
▶
If the connection is interrupted, search for available hotspots again and re-
peat connection setup.
▶
Delete unused hotspots. This shortens the time required for connection set-
up.
Connect via WPS
It is not necessary to enter the access password when connecting via WPS.
Connecting the Infotainment system to the hotspot of the external device
›
Switch on the ignition.
›
In the external device, switch on the hotspot, its visibility, and the WPS con-
nection option.
›
In the Infotainment system, switch on WLAN in menu item
→ → WLAN
→ WLAN → WLAN.
›
Tap the function area WPS quick connection (WPS button)
Connecting the external device to the Infotainment hotspot
›
Switch on the ignition.
›
Switch on the Infotainment hotspot in menu item
→ → WLAN → Mobile
hotspot → Mobile hotspot.
›
Tap the function area WPS quick connection (WPS button)
›
In the external device, switch on the WPS connection option.
131
Data connection
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SmartLink
Introductory information
Introduction to the subject
Applies to Infotainment Amundsen, Swing.
Fig. 148
Information on SmartLink on the
ŠKODA websites
SmartLink offers the option of displaying and operating certified applications
on an external device connected via USB on the Infotainment screen.
SmartLink supports the following communication systems.
▶
“Android Auto”
▶
“Apple CarPlay”
▶
“MirrorLink
®
”
Using the applications in the connected external device, you can use naviga-
tion, make a call and listen to music.
For safety reasons, the operation of some applications while driving is not pos-
sible or only limited.
Scan the QR code
or enter the following address in your web brows-
er to open the website with information on the SmartLink system.
http://go.skoda.eu/connectivity-smartlink
Depending on the model of the connected external device, some applications
can be operated via the Infotainment system, using your voice or using the
buttons on the multi-function steering wheel.
To activate voice control for the connected external device, hold the
or
button or hold down the button on the multifunction steering wheel.
CAUTION
To establish the connection, the date and time in the Infotainment system
must be set correctly. If the date and time setting is based on the GPS signal,
then problems may arise with establishing a connection when the GPS signal
reception is poor.
Note
■
We recommend that you use extension cables from ŠKODA Original Acces-
sories.
■
With some connected external devices, it is necessary for the connected ex-
ternal device to be “unlocked” for trouble-free functioning of the SmartLink
function.
Main menu
Fig. 149 Supported communication systems / Example of available
communication systems of the connected external device
›
To display the main SmartLink menu, press button
, then tap the function
surface .
›
or: Press the
button (applies to Infotainment Swing).
If no external device is connected, then a menu with supported communica-
tion systems SmartLink is displayed
A
,
Main menu
Supported communication systems
Available communication systems of the connected external device
Display of information about SmartLink
Disconnection of the active connection
Settings of the SmartLink
A
B
132
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Android Auto
Connection set-up / disconnection
Prerequisites for establishing a connection
The external device to be connected must support the “Android Auto”
communication system.
In the external device to be connected, the “Android Auto” application
must be installed.
Some applications require the data connection in the connected external
device to be switched on.
A list external of devices, supported regions and applications that the “Android
Auto” connection supports can be found on the websites of Google Inc..
Connection set-up
›
Switch on the ignition.
›
Switch on the Infotainment system.
›
Switch on the external device.
›
Connect the external device to the USB input using a cable
›
Select the connection using “Android Auto”
B
Disconnection of the active connection
›
In the “Android Auto” main menu, tap the function surface .
›
Tap the “ŠKODA” function surface to go back to the main menu SmartLink.
›
Tap the function surface .
›
or: Disconnect the cable from the USB input. When reconnected, the exter-
nal device is automatically connected.
Function restriction of Infotainment
For the duration of the connection, the external device cannot be used as an
audio source in the Media menu.
By connecting the external device with “Android Auto”, all currently connected
Bluetooth
®
devices will be disconnected and the external device will automati-
cally be connected as the main telephone.
For the duration of the connection, no Bluetooth devices can be connected to
the infotainment system.
If route guidance is taking place at this moment in Infotainment, then there
is the option to start the route guidance in the “Android Auto” application. And
vice versa, if route guidance is currently taking place in the “Android Auto”
application, then there is the possibility that this will be terminated by the
start of route guidance by the Infotainment system.
Main menu
Fig. 150
Android Auto: Main menu
Main menu
Navigation applications
Telephone applications
Overview of running applications, telephone calls, accepted text messag-
es, tasks in the working directory, weather or similar.
Music applications
Display of other available applications as well as the option of returning to
the main SmartLink menu
Switching on voice control (Google Voice)
Next to the function surface in area
A
, the symbol , Then, by tapping on this
function surface again, a list of new applications is displayed.
133
SmartLink
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Apple CarPlay
Connection set-up / disconnection
Prerequisites for establishing a connection
The external device to be connected must support the “Apple CarPlay”
communication system.
The data connection of the external device to be connected must be ac-
tive.
The voice control (Siri) of the external device to be connected must be ac-
tive.
A list external of devices, supported regions and applications that the “Apple
CarPlay” connection supports can be found on the websites of Apple Inc..
Connection set-up
›
Switch on the ignition.
›
Switch on the Infotainment system.
›
Switch on the external device.
›
Connect the external device to the USB input using a cable
›
Select the connection using “Apple CarPlay”
B
Disconnection of the active connection
›
In the main menu “Apple CarPlay”, tap the function surface of the “ŠKODA”
application, the main menu SmartLink is displayed.
›
Tap the function surface .
›
or: Disconnect the cable from the USB input. When reconnected, the exter-
nal device is automatically connected.
Function restriction of Infotainment
For the duration of the connection, the external device cannot be used as an
audio source in the Media menu.
By connecting the external device with “Apple CarPlay”, all currently connec-
ted Bluetooth
®
devices will be disconnected.
For the duration of the connection, no Bluetooth devices can be connected to
the infotainment system.
If route guidance is taking place at this moment using Infotainment, then this
is terminated by starting the route guidance in the “Apple CarPlay” application.
And vice versa, if route guidance is currently taking place in the “Apple
CarPlay” application, then this will be terminated by the start of route guid-
ance by the Infotainment system.
Note
Some phone features of the connected external device can be operated in the
display of the instrument cluster
Main menu
Fig. 151
Apple CarPlay: Main menu
Main menu
List of available applications
More pages with applications
Depending on how long the function surface is pressed for:
▶
Tap - Return to “Apple Carplay” main menu
▶
Hold - Switch on voice control (Siri)
MirrorLink
®
Connection set-up / disconnection
Prerequisites for establishing a connection
The external device to be connected must support the communication
system “MirrorLink
®
”.
The external device to be connected must have at least one
“MirrorLink
®
”application installed.
Some applications require the data connection in the connected external
device to be switched on.
A
B
134
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Connection set-up
›
Switch on the ignition.
›
Switch on the Infotainment system.
›
Switch on the external device.
›
Connect the external device to the USB input using a cable
›
Select the connection using “MirrorLink
®
”
B
Disconnection of the active connection
›
In the main menu of “MirrorLink
®
”, tap the function surface The SmartLink
main menu is displayed.
›
Tap the functional surface .
›
or: Disconnect the cable from the USB input. When reconnected, the exter-
nal device is automatically connected.
Function restriction of Infotainment
Applies to Infotainment Amundsen: If you wish to use the device to be con-
nected in the Telephone menu, the external device must be paired with and
connected to the Infotainment system before establishing the connec-
tion
Applies to Infotainment Swing. By connecting the external device to all cur-
rently connected Bluetooth
®
devices will be disconnected and the external de-
vice will automatically be connected as the main telephone. Depending on the
device to be connected, a connection confirmation may be required.
For the duration of the connection, the external device cannot be used as an
audio source in the Media menu.
Main menu
Fig. 152
MirrorLink®: Main menu
Main menu
Return to SmartLink main menu
List of running applications
Display of the last running application in the connected external device
Settings of the SmartLink
menu or
List of applications
More pages with applications
Applications cannot be operated while driving
Display of the function surfaces during the running application
Return to “MirrorLink
®
” main menu
Show function surfaces at the top/bottom (applies to Infotainment
Amundsen)
Move the function surfaces to the desired corner of the screen
(applies to the Infotainment Swing)
To show/hide the function surfaces, press the controller (applies to Infotain-
ment Amundsen).
function problems
If problems occur with the “MirrorLink
®
”connection, then one of the following
messages may occur on the screen.
■
Fault: transfer - Disconnect and reconnect the external device
■
MirrorLink® audio is unavailable. - Disconnect and reconnect the external device
■
MirrorLink® availability on this mobile device is restricted. - it is not possible to use the
connected device during the journey or the device only has limited availabili-
ty (applies to Infotainment swing)
■
The mobile device is locked. Please unlock the mobile device to use MirrorLink® - “unlock”
the connected external device
■
Unable to start app or app not working. - Disconnect and reconnect the external
device
A
B
135
SmartLink
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Application“ŠKODA OneApp”
Introductory information
Fig. 153
Information on the ŠKODA
OneApp application on the ŠKO-
DA websites
A mobile telephone connected to the Infotainment system allows you to edit
and evaluate journey data in the “ŠKODA One App” application.
After entering the following address into the web browser, the website is
opened with information on the ŠKODA mobile applications.
http://go.skoda.eu/service-app
The “ŠKODA OneApp” application is available in the App Store and Google
Play online shops.
“ŠKODA OneApp” application
›
Scan the QR code
.
For the full functionality of the “ŠKODA One App” application, data transfer
from external devices must be activated.
Applies to Infotainment Amundsen
▶
To activate data transfer from external devices, press the
button, then
tap on function surface → Mobile device data transfer → Activate data transfer for
ŠKODA Apps.
Applies to Infotainment Swing
▶
To activate data from external devices, press the
button, then tap on
function surface → Activate data transfer for ŠKODA apps.
Note
Some functions of the application are not available in all countries or there is a
function restriction during the journey
Connecting to the Infotainment system
The mobile telephone can be connected to the Infotainment system using the
SmartLink function or via WLAN.
Connection by SmartLink
›
Switch on the ignition.
›
Establish the connection via SmartLink (eg “MirrorLink
®
”)
.
›
In the list of available applications, select the “ŠKODA One App” application.
Depending on the type of external device connected, some applications can be
started using voice activation, via the Infotainment or using the buttons on the
multi-function steering wheel.
Once connected, the contents of the application are displayed on the infotain-
ment screen.
A possible connection between the mobile telephone and the Infotainment
system via WLAN will be terminated after a connection is established using
SmartLink.
Connection via WLAN (applies to Infotainment Amundsen)
›
Switch on the ignition.
›
Establish the WLAN connection
›
In the mobile telephone, start the “ŠKODA OneApp” application.
Disconnection
The connection can be disconnected in one of the following ways.
›
Switch off the ignition for longer than 5 seconds (for vehicles with a starter
button, switch off the engine and open the driver's door).
›
End the connection in the “ŠKODA OneApp” application.
›
Disconnect the mobile telephone from the USB port or terminate the WLAN
connection.
136
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Navigation
Introductory information
Navigation - function sequence
Applies to Infotainment Amundsen.
Route guidance is started as follows.
›
Find/enter a new destination or select one of the stored destinations.
›
Confirm the route calculation in the destination details or, if necessary, adjust
the route options.
›
Select the preferred route type, if this is requested by the Infotainment sys-
tem.
A route is calculated and route guidance starts.
The route guidance is provided by means of graphical driving recommenda-
tions and navigation announcements.
There is an option to add additional destinations during route guidance, or to
adapt the route.
If a traffic radio station is available, information concerning traffic delays is
evaluated by the Infotainment system and, if necessary, an alternative route is
offered.
If you deviate from the route, then a new route is calculated.
GPS satellite signal
Infotainment uses the GPS (Global Positioning System) satellite signal for
route guidance.
Outside the range of the GPS satellite signal (e.g. in dense vegetation, in tun-
nels, parking garages, etc.), the Infotainment system navigates only with re-
strictions, with the aid of vehicle sensors.
The Infotainment system offers the possibility off showing the following infor-
mation on the current geographical position of the vehicle and the satellite sig-
nal in the Position
Geographical latitude
Geographical longitude
Elevation
Number of received/available satellites
If no GPS satellite signal is available, no values are displayed.
Navigation data
Navigation data source
The navigation data is stored on an Original SD Card.
In order to ensure the function of the navigation, the Original SD card, with the
navigation data, must be inserted in the respective slot in the external module
If the original SD card is damaged or lost, a new original SD card can be pur-
chased from ŠKODA Original Accessories.
With a Non-original SD Card, navigation does not work.
Determining the version of the navigation data
›
In the main Navigation menu, tap the function surface → Version information .
Updating the navigation data
We recommend that you update the navigation data on a regular basis.
The Infotainment can give incorrect driving recommendations if the road con-
dition or the traffic situation does not match the navigation data. This can lead
to route guidance being carried out using a different route or proposing a
change of direction in a one-way street. Therefore, observe the respective
traffic signs while driving, which always have priority over the driving recom-
mendations.
The information on updating the navigation data can be obtained from a
ŠKODA partner or on the following ŠKODA websites.
http://go.skoda.eu/updateportal
Importing/updating the POI categories online
When “Infotainment Online”
services are activated, it is possible to
download the POI categories created in the user profile on the “ŠKODA
Connect portal” websites.
▶
In the Navigation main menu, tap the function surface → Version information
→ Online update → Retrieve.
▶
or: Press the
button, then tap on function surface → .
137
Navigation
-------------------------------------------------------------------------------------------------------------------------------------------------------------
A menu for the import/update of POI categories is displayed.
▶
Select the desired list entries.
▶
Tap on the function surface Retrieve and confirm the download process.
Main menu
Fig. 154
Navigation: Main menu
›
To display, press the
button.
›
or: Press the
button, then tap on function surface .
Description of the function interfaces
A
Context-dependent:
Route guidance is deactivated - Search/enter a new destination
Route guidance is activated - The following menu is displayed:
▶
Route details - Displays the route details
▶
Congestion ahead - Manual adjusts traffic conditions
▶
Enter destination - Search / enter a new destination / stopover
▶
Stop route guidance - Stops route guidance
The following menu is displayed:
▶
Curr. current position - Store the current vehicle position as the flagged
destination
▶
Routes - Displays the list of saved routes
▶
Destinations - Display the list of stored destinations
▶
Last destinations - Display the list of recent destinations to which route
guidance was carried out
▶
Home address - Route guidance to your home address
Search for POIs in categories
,
and
Map display options
Operation of Media/Radio playback
Display for the volume setting of the navigation announcements/repeti-
tion of the navigation announcement
Navigation settings
Map
Fig. 155
Map description
The following information and function surfaces can be displayed in the
map.
Vehicle position
Route
Function interfaces for card use
Function surface of the POI
Function surface for the POI list
Function surface for displaying a traffic incident
Information on the maximum permitted speed
Destination position
Intermediate destination position
Destination position Home address
Favourite position
Information in the status line
Street name/street number of the current vehicle position
Distance to destination
Route to the stopover
Estimated travelling time to the destination
Estimated travelling time to the stopover
Estimated time of arrival at destination/stopover
A
B
C
D
E
F
G
138
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Split screen
Fig. 156
Split screen
›
To activate/deactivate, go to the main Navigation menu and tap on the func-
tion surface → Split screen.
›
To select content of the split screen
A
face Tap and select one of the following menus, depending on the context.
■
Audio - Operation of Radio/Mediaplayback
■
Compass - Displays the current vehicle location in relation to the compass di-
rections
■
Most frequent routes - Display the three most frequent routes (if guidance not
being carried out)
■
Manoeuvre - Display graphical driving recommendations (if route guidance is
enabled)
■
Position - Displays the geographical coordinates of the current vehicle loca-
tion
Search for destination and enter
Selecting the type of destination search/destination entry
Fig. 157
Selecting the type of destina-
tion search/destination entry
›
Route guidance is disabled - From the navigation main menu, the function
surface → .
›
Route guidance is enabled - From the main menu navigation, tap on the
function surface → Enter destination → .
Function surfaces
Search for a destination or POI (point of interest) by name
Destination entry by address
Online POI search
Search for a point along the route (only works with active route guidance)
Destination input via the map point or using the GPS coordinates
Search for destination/POI
Fig. 158
Menu for the destination search
Fig. 159 List of destinations visited: in the navigation data / online
The feature allows a full text search of locations or points of interest (POI) by
entering keywords.
A
B
C
D
E
139
Navigation
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст