Skoda Rapid (2019 year). Manual — part 9
Show menu
›
Route guidance is disabled - From the navigation main menu, the function
surface → .
›
Route guidance is enabled - From the main menu navigation, tap on the
function surface → Tap Enter destination
›
Then tap the function surface of one of the menu items for the destination
search
A
,
C
or
D
Function surfaces
Input line
Depending on the search mode, the following symbols are displayed
- Display the map as well as the list of the destinations listed in the navi-
gation database
- Display the map as well as the list of online destinations
- Select the destination search/destination entry
List of last destinations (if no character is entered) / List of visited destina-
tions
Keypad
Status of online services
Find destination
▶
Enter the POI name or the POI category (POI) and, if required, the place and
street name or house number/postal code.
A list of the destinations found is displayed in area
D
.
▶
Select the desired destination and the destination details will be displayed.
▶
or: Tap the
B
function surface.
A map with the following symbols and a list of the destinations found is dis-
played.
Destinations found in the navigation data
- .
Destinations found online
- .
▶
Select the desired destination and the destination details will be displayed.
A
B
C
D
E
F
Enter destination using the address
Fig. 160 Enter destination using the address: Main menu / List of visited
destinations
Show menu
›
Route guidance is disabled - From the navigation main menu, the function
surface .
›
Route guidance is enabled - From the main menu navigation, tap on the
function surface → Tap Enter destination
›
Then tap the function surface →
B
Enter dest.
›
Enter the destination address and then confirm
- .
›
Tap the function surface to see the destination details.
Relevant names (e.g. place/street names) are offered in the entry line during
entry, depending on the context. The location of the proposed destination can
be displayed by tapping the function surface Map.
Depending on the number of places visited, a map with a list of visited places
can be displayed automatically
- .
The map with the list of visited locations can be accessed manually by tapping
the function surface .
140
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Entering a destination via the map point and using GPS coordinates
Fig. 161 Enter destination: via the map point / using the GPS coordi-
nates
Show menu
›
Route guidance is disabled - From the navigation main menu, the function
surface .
›
Route guidance is enabled - From the main menu navigation, tap on the
function surface → Tap Enter destination
›
Then tap the function surface →
E
Enter destination via map point
›
By sliding the screen move the desired destination into the cross-hair
- .
›
Tap the function surface to see the destination details.
Entering the destination using coordinates
›
Tap in the values of the GPS coordinates one at a time and adjust
,
›
Tap the function surface to see the destination details.
If information is available about the point entered in the navigation data, then
these will be displayed instead of the GPS coordinates (e.g. address
A
).
Entering a destination via the map point
Fig. 162
Menu after tapping the map
point
Tap on the map to display the symbol and a menu with the following menu
items (depending on the context)
.
Display the destination details
Display the POI details/display the list of POIs (function surface) )
Start route guidance to the selected point
Paste the selected point into the current route guidance as the next des-
tination
Start route guidance to the favourite
Start route guidance to the home address
Destination search in the vicinity of the selected point
Define the starting point for demo mode (if it is turned on)
Find petrol station, restaurant or car park
Fig. 163 List of petrol stations visited: in the navigation data / online
A
B
C
141
Navigation
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Fig. 164 List of car parks visited: in the navigation data / online
The Infotainment allows you to find petrol stations, restaurants or car parks
quickly in the navigation data as well as online.
›
In the main Navigation menu, tap the function surface .
›
Tap the function surface of the desired category.
›
or: Press the
button, and then tap on function surface → or .
Find destination in the navigation data
Depending on the context below, a list of POIs from the selected category is
displayed.
▶
No route guidance is taking place - The nearest destinations in a radius of
200 km from the current vehicle position are displayed.
▶
Route guidance is taking place - Destinations on the route or near the route
are displayed.
Find destination online
When “Infotainment Online”
services are activated, a list of POIs
from the selected category in a radius around the current vehicle position is
displayed, regardless of whether or not route guidance is taking place.
After searching for a destination, you can switch between the list of destina-
tions found in the navigation data and the list of destinations found online by
tapping one of the following function surfaces at position
A
or
Displays the list of destinations found in the navigation data.
Displays the list of destinations found online.
Note
With the → Fuel options → Select preferred fuel station function activated, the pre-
ferred fuel stations are displayed in the first three positions during the fuel sta-
tion search.
Saved destinations
Last destinations
List of last destinations
›
In the main Navigation menu, tap the function surface → Last destinations.
Details of the last destination
›
In the main Navigation menu, press the
button.
If route guide is not taking place, the details of the last destination to which
route guidance was carried out are displayed. If route guidance is taking
place, the details of the final destination are displayed.
Last destinations in the destination/POI search menu
In the destination search menu, a short list of last destinations is shown in the
area
D
Function surfaces in the list of last destinations
- Destination search by name (the function surface is displayed when
there are more than 5 entries available)
- Display the details of the selected destination
Destination memory
Fig. 165 Select list of stored destinations/categories of stored destina-
tions
Find
142
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
List of stored destinations
›
In the main Navigation menu, tap the function surface → Destinations.
›
Tap on function surface
A
and select one of the following catego-
ries of saved destinations
B
All saved destinations
▶
- Flagged destination (vehicle position at the time of storage)
▶
- Stored destination (manually saved destination/destination impor-
ted in vCard format)
▶
- Favourite (destination with additional favourite property)
Favourites (the favourite location is shown on the map by the
symbol).
Telephone contact addresses of the connected telephone.
Online destinations created in the user profile on the “ŠKODA Connect
Portal” website or in the “ŠKODA Connect” application
Function surfaces in the list of stored destinations
- Destination search by name (the function surface is displayed if there
are several entries on the next page of the list)
- Display the destination details
Store target
▶
In the main Navigation menu, tap the function surface → Last destinations.
▶
Tap the functional surface Tap on the desired destination, the destination
details are displayed.
▶
Tap on the function surface Store .
▶
Rename the destination if necessary and confirm storage.
Save “Flagged destination” (current vehicle position)
▶
In the main Navigation menu, tap the function surface → Store → Store cur-
rent position.
▶
By tapping again on function surface Rename, you can rename the flagged
destination and store it as a destination in the destination memory.
Storing the next flagged destination will overwrite the last flagged destination.
To maintain the existing flagged destination, it must be stored in the Infotain-
ment memory.
Save destination as a favourite/cancel
It is not possible to store a contact address, a vCard or a target image as a fa-
vourite.
▶
In the main Navigation menu, tap the function surface → Destinations.
▶
Tap the functional surface and select the desired list of destinations.
Find
▶
Show the destination details by tapping on the function surface at the de-
sired destination.
▶
Tap the function surface Edit.
▶
Tap the function surface Favourite.
Delete the destination
▶
In the main Navigation menu, tap the function surface → Destinations.
▶
Tap the functional surface and select the desired list of destinations.
▶
Show the destination details by tapping on the function surface at the de-
sired destination.
▶
Tap the function surface Edit.
▶
Tap the function surface Delete and confirm the deletion.
Home address
Define home address
When your home address is not entered, proceed as follows.
›
In the main Navigation menu, tap the function surface → Home address.
›
Define the home address using the current vehicle position or by entering
the address.
Change home address
›
In the main Navigation menu, tap the function surface → Manage memory →
Define home address.
›
Tap the function surface Edit.
›
Edit the home address or set one up using the current vehicle position or by
entering the address.
Delete home address
›
In the main Navigation menu, tap the function surface → Manage memory →
Delete user data → Home address.
›
Tap the function surface Delete and confirm the deletion.
143
Navigation
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Import custom destinations
Introduction to the subject
Fig. 166
MyDestination application on
the ŠKODA websites
Fig. 167
ŠKODA Connect websites
Your own destinations can be created using the ŠKODAapplication
“MyDestination”, in the user profile on the website “ŠKODA Connect Portal” or
in the application “ŠKODA Connect”
Scan the QR code
or enter the following address in your web brows-
er to display more information on the “MyDestination” application.
http://go.skoda.eu/my-destination
For the “ŠKODA Connect Portal” refer to the website of “ŠKODA Connect”.
You can open this by scanning the QR code
or entering the following
address in your web browser.
http://go.skoda.eu/connectivity
Destinations in vCard format
In the Infotainment memory, you can import a custom destination in vCard
format (*.vcf) from an SD card or a USB source.
Import
›
Insert the SD card into the external module or connect a USB source with
the file of the custom destination.
›
In the main Navigation menu, tap the function surface → Manage memory →
Import destinations (SD/USB).
›
Select the source and confirm the import.
Route guidance
›
In the main Navigation menu, tap the function surface → Destinations → →
.
›
Find and select the desired imported destination.
Delete custom destination
›
In the main Navigation menu, tap the function surface → Destinations → →
.
›
Tap the functional surface Tap on the desired own destination.
›
In the destination details, tap the function surface Edit → Delete and confirm
the deletion process.
POI categories created in the “MyDestination” application
Import/update
›
Insert the SD card into the external module or connect a USB source with
the POI categories.
›
In the main Navigation menu, tap the function surface → Manage memory→
Update "My POIs" (SD/USB) Tap.
If the same custom POI category name already exists in the Infotainment
memory, then it will be overwritten during the import.
Show POIs in the map
›
In the main Navigation menu, tap the function surface → Map → Select cate-
gories for POIs → My points of interest (Personal POI).
›
Select the imported POI category.
Guidance to the POI
›
In the map, tap on the traffic obstruction symbol.
Details of the selected destination will be displayed
.
Clear all own POI categories
›
In the Navigation main menu, tap the function surface → Manage memory →
Delete "My POIs".
›
Tap the function surface Delete and confirm the deletion.
144
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
POI categories created in the user profile in the “ŠKODA Connect
Portal”
Your own POI categories created in the user profile on the website “ŠKODA
Connect Portal” can be imported into the Infotainment memory.
The requirement for importing a POI category is that “Infotainment Online”
services are activated.
Importing POI categories
In the main Navigation menu, tap the function surface → Version information →
Online update.
›
or: Press the
button, then tap on function surface → .
A menu for importing/updating the navigation data and POI categories is dis-
played.
›
Tap the function surface POIs → Retrieve.
If new POI categories are available, their quantity and file size is displayed by
the Infotainment system.
›
Tap the function surface Start to start route guidance.
›
To complete the import, tap the function surface Next and confirm the im-
port.
Show POIs in the map
›
In the main Navigation menu, tap the function surface → Map → Select cate-
gories for POIs → My points of interest (Personal POI).
›
Select the imported POI category.
Route guidance to a destination in the imported POI category
›
In the map, tap on the traffic obstruction symbol.
There are details of the selected target appears
,
Clear all own POI categories
›
In the Navigation main menu, tap the function surface → Manage memory →
Delete "My POIs".
›
Tap the function surface Delete and confirm the deletion.
Destinations created in the user profile in the “ŠKODA Connect
Portal”
The destinations you have created in the user profile on the website “ŠKODA
Connect Portal” or in the application “ŠKODA Connect” can be imported to the
Infotainment memory.
The requirement for importing the destinations is that “Infotainment Online”
services are activated.
importing destinations
›
In the main Navigation menu, tap the function surface → Destinations → →
.
›
or: Press the
button, then tap on function surface → .
›
Tap on the function surface Update.
›
If new destinations are available, then confirm the import.
If the user profile on the website “ŠKODA Connect Portal” or in the application
“ŠKODA Connect” creates an object and sent to the Infotainment, after
switching on the ignition in the Infotainment screen displays a message re-
garding a new destination with the option to import this displayed.
Route guidance to an online destination
›
In the main Navigation menu, tap the function surface → Destinations → →
.
›
In the list of online destinations, find and select the desired destination.
Deleting online destinations
›
To delete all online destinations go to the main Navigation menu and tap the
function surface → Manage memory → Delete user data → Online destinations.
›
To delete one online destination, go to the main Navigation menu and tap on
function surface → Destinations → → → → Edit → Delete.
145
Navigation
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Image with GPS coordinates
Fig. 168
Image with GPS coordinates
Infotainment enables guidance to the GPS coordinate data stored in the im-
age.
›
Press the
button then tap the function surface Images.
›
Select the connected source and open the image with GPS coordinates.
›
Tap the function surface
Surface in the image, a menu opens with
the option to start route guidance.
The image can be obtained from an external device in which GPS coordinates
are stored during the imaging process. This can be created and imported in
the“MyDestination” application
Map
Map display options
Fig. 169
Map display options
›
In the main Navigation menu, tap the function surface .
The following function surfaces are displayed
2D - Two-dimensional map display
3D - Three-dimensional map display
Display of the route from the current vehicle location to the destination
Display of the position of the destination or the next stopover on the map
(depending on the setting for menu item → Advanced settings → Status line:)
Automatic map display in day or night mode (depending on the currently
active vehicle lighting)
Daytime map display
Night-time map display
Switch the split screen display on/off
Switching on/ off of the selected POI categories display
ing a destination via the map point
If the map scale of the 2D Map or 3D Map is greater than 10 km, then the map
is automatically displayed as 2D and aligned in the direction of north. If the
scale is increased beyond this value, then the map is switched back to the orig-
inal representation.
Map scale
Fig. 170 Function surfaces for changing the map scale
It is possible to change the map scale manually or to activate the automatic
scale change.
›
Tap the function surface
A
In area
B
, function surfaces for changing the map scale are dis-
played.
A
B
C
D
E
146
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Types of manual scale change
▶
Touch the screen with two fingers and pull them apart or close them togeth-
er.
▶
Press the control knob .
Activating automatic scale change
If the automatic scale is active, the map scale will change automatically de-
pending on the type of roads travelled (motorway - smaller map scale / town -
larger map scale) and the manoeuvre to be carried out.
▶
To activate the automatic scale change, go to the main Navigation menu and
tap on function surface → .
Tap the functional surface is highlighted in green.
The automatic scale is only active as long as the map is centred on the vehicle
position (the function surface is hidden).
▶
To deactivate the automatic scale change, go to the main Navigation menu
and tap on function surface → .
Tap the functional surface is highlighted in white.
The function is also deactivated when the map is moved or the map scale is
changed manually.
Map view in reduced scale
▶
In the main Navigation menu, tap on function surface
A
→ .
The map scale is reduced for a few seconds and then restored.
Changing map orientation
Fig. 171
Changing the map orientation
You can change the map orientation under the following conditions.
The map is in the 2D display.
The map is centred (the function surface is hidden).
The map scale is max. 10 km.
›
To change the map orientation, go to the main Navigation menu and tap on
function surface
A
The map is oriented to the north
The symbol the vehicle position rotates, the map and the Polar Star Symbol
do not rotate.
With a larger map scale than 10 km, the map is automatically oriented towards
north.
Map oriented to the direction of travel
The map and the Polar Star symbol rotate, the vehicle position symbol
does not rotate.
Map centring
Fig. 172
Map centring
The moved map can be centred in the vehicle, destination or route position.
›
To centre the map, tap on function surface
A
.
POIs display
The Infotainment system offers the possibility of displaying POI symbols on
the map on the Infotainment screen.
›
To activate/deactivate the display, go to the main Navigation menu and tap
on the function surface → POIs.
›
To select the POIs to be displayed, go to the main Navigation menu and tap
on the function surface → Map → Select categories for POIs and select the de-
sired categories (max. 10).
147
Navigation
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Road sign display
The Infotainment system offers the option of displaying the traffic signs stor-
ed in the navigation data or detected by the front camera during guidance on
the Infotainment screen
G
›
To activate/deactivate the road sign display, go to the main Navigation
menu and tap on the function surface → Map → Show road signs.
For some vehicles it is possible to set an alert when exceeding the permitted
speed limited by a road sign.
›
Press the
button, then tap on function surface → Driver assistance →
Speed warning:.
When towing a trailer, we recommend that you activate recognition of road
signs relevant to trailers.
›
Press the
button, then tap on function surface → Driver assistance → Show
road signs relevant to trailers.
Route guidance
Introduction to the subject
A route is created by starting route guidance to a destination. Additional stop-
overs can be added to the route.
Route guidance takes place as follows
▶
Through graphical driving instructions on the Infotainment screen and in the
display of the instrument cluster.
▶
Through navigation announcements.
The Infotainment system tries to allow for continued guidance even if the nav-
igation data is incomplete or there is no data at all for the given area.
The route is recalculated each time you ignore driving recommendations or
change the route.
CAUTION
The navigation announcements provided may vary from the actual situations,
e.g. due to out-of-date navigation data.
Destination details
Fig. 173 Details of the: in the navigation data / destination searched for
online
The following menu items and information are displayed in the destination de-
tails
.
Area with function surfaces
Detailed destination information
Destination position in the map
Detailed destination information (if available)
Status of online services
Display the destination details
The destination details can be displayed in one of the following ways.
▶
While entering a destination.
▶
By tapping on the function surface in the destination list.
▶
Press the
button in the main Navigation menu to display the details of
the last destination.
Function surfaces
Using the function surfaces in area
A
, the following functions can be per-
formed, depending on the context.
▶
Start/stop route guidance.
▶
Searching for a nearby destination
.
▶
Set route options.
▶
Store destination.
A
B
C
D
E
148
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
▶
Edit destination (the destination can be deleted, renamed or saved as a fa-
vourite).
▶
Dial the POI phone number (if the Infotainment system is connected to a
phone
Route calculation and starting route guidance
Fig. 174
Alternative routes
Routes are calculated based on the set route options. The route options can be
set: → Route options.
Alternative routes
With selection of alternative routes turned on, the following menu is displayed
after calculation of a new route
.
Calculate the most economical route with shortest travelling time and
distance travelled – the route is highlighted green
Calculate the fastest route to the destination, even if a detour is neces-
sary - the route is highlighted in red
Calculate the shortest route to the destination, even if a longer travel-
ling time is required - the route is highlighted in orange
It is possible to select an already calculated alternative route before calculation
of the remaining routes is completed.
Selecting the type of route will start the route guidance.
If no route selection is made within 30 s of calculation of all routes, route guid-
ance will start automatically according to the preferred route type.
A
B
C
Route calculation for trailer towing
When driving with a trailer or any other accessory connected to the trailer
socket, we recommend that you switch on trailer recognition, if necessary, to
set the maximum speed for towing a trailer.
›
To calculate the route when driving with a trailer, go to the main Navigation
menu and tap the function surface → Route options → .
›
To set the maximum speed of the trailer, press the
button, then tap on
function surface → Driver assistance → Trailer recognition → Maximum speed for
trailer.
Demo mode
Demo mode provides a driving simulation to the entered destination. The func-
tion allows you to travel through the calculated route “virtually”.
When Demo mode is turned on, a menu for route guidance in Demo mode or
in normal mode is displayed before route guidance starts.
›
To activate/deactivate, go to the main Navigation menu and tap on the func-
tion surface → Advanced settings → Demo mode.
When Demo mode is activated, the route starting point can be defined.
›
In the main Navigation menu, tap the function surface Tap→ Advanced set-
tings → Define demo mode starting point.
›
Define the starting point by entering the address or the current vehicle posi-
tion.
›
The demo mode starting point can also be set provided demo mode is turned
on by tapping on the desired map location and selecting the menu item Start
Demo Mode
, Entering a destination via the map point.
149
Navigation
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Graphical driving recommendations
Fig. 175 Driving recommendations/driving recommendation detail
The display of the graphical driving recommendations is carried out in the split
screen Manoeuvre as well as the display of the instrument cluster.
In the Manoeuvre split screen, the following driving recommendations are dis-
played
Street name/street number of the current vehicle position
Driving recommendations with street names/road numbers, the route and
the travel time to the manoeuvre location
Driving recommendation details (displayed near the manoeuvre)
Lane guidance
In the Manoeuvre split screen, the Infotainment system also draws your atten-
tion to traffic obstructions received via TMC, as well as to motorways, car
parks, petrol stations or restaurants.
Speed limits
With the → Advanced settings → Note:National border crossed , display the
country-specific speed limits when crossing international borders.
These speed limits can be displayed by tapping on function surface → Top
speed in the main menu navigation.
Navigation announcements
The Infotainment system issues navigation announcements during route guid-
ance.
A
B
C
D
The navigation announcements are generated by the Infotainment system.
Flawless clarity of the message (e.g., road or city name) cannot always be guar-
anteed.
The last navigation announcement can be repeated in the main Navigation
menu by tapping on the function surface → .
The timing of the navigation announcement is dependent on the type of road
and on the driving speed.
The type of navigation announcements can be set: → Navigation announcements.
Note
Route guidance on the most frequently travelled route takes place without
navigation announcements.
Most frequent routes
The most frequently travelled routes are automatically saved by Infotainment.
Of these, up to 3 routes can be offered, which best match the current time,
day of the week as well as the vehicle position.
Route guidance to one of the routes used most frequently can be started pro-
vided route guidance is not currently active.
›
To display the menu with the most frequently travelled routes, go to the split
screen and tap on the function surface Most frequent routes → Show on map.
›
Select the desired route.
The selected route is then calculated and route guidance starts.
The menu display in the split screen can be activated/deactivated in the main
Navigation menu by tapping the function surface → Route options → Most fre-
quent routes switched on/off.
The stored most frequent routes can be deleted in the main Navigation menu
by tapping the function surface → Manage memory → Delete user data → Most fre-
quent routes deleted.
Note
Route guidance on the most frequently travelled route takes place without
navigation announcements.
150
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Finish route guidance
Route guidance can be finished in one of the following ways.
›
The final destination is reached.
›
In the main Navigation menu by tapping the function surface → Stop route
guidance.
›
By turning off the ignition for longer than 120 minutes.
Abort route guidance
If the ignition is switched off and on again, then route guidance is continued in
one of the following ways, depending on the stop time.
▶
Within 15 minutes - route guidance continues, taking the calculated route in-
to account.
▶
From 15 minutes to 120 minutes - after confirming the message on the Info-
tainment screen, the route guidance continues, taking the calculated route
into account.
▶
After 120 min - route guidance is cancelled.
Route
Route details
Fig. 176 Route details: a route destination / several route destinations
During route guidance, the Route details (information about the current route)
can be displayed.
›
In the main Navigation menu, tap the function surface → Route details.
One route destination
In the route details, the following information is displayed at the destination
- .
Area with function surfaces
Destination information
Estimated time of arrival at destination/remaining driving time to desti-
nation
Remaining distance to the destination
Chosen route type (economic, fastest, shortest)
Current vehicle position (address/GPS coordinates)
You can adjust the display of the arrival time or the remaining driving time as
follows.
▶
In the main Navigation menu, tap the function surface → Advanced settings →
Time display:.
Several route destinations
In the route details, the following information is displayed at the respective
destinations
- .
Area with function surfaces
Stopover (with sequential number)
Final destination
Estimated time of arrival at destination/stopover
Driving distance to destination/stopover
Change positions of the destinations with each other
Delete the destination
Continuation of the route guidance from the selected target (previous
stopovers are skipped)
Display the destination details
Insert destination into the route
▶
In the area
A
, tap on the function surface Enter destination and enter a new
destination.
▶
or: Tap on the area
A
the function surface destinations and select an object in
the list of stored destinations.
Each additional destination is added to the list as the first subsequent destina-
tion route.
A
B
C
D
A
151
Navigation
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Change positions of destinations with each other
▶
Press and hold the relevant function surface and move the destination to
the desired position.
For destinations already reached on the route, the note Destination reached is dis-
played below the destination name. It is no longer possible to change the posi-
tion of these destinations with each other.
Store route
▶
In area
A
, tap the function surface Store.
▶
Save the edited route as a new route or replace the existing saved route.
The route is stored in the route list
Stop route guidance
▶
In area
A
, tap the function surface Stop.
Route list
In the route list, it is possible to create, import, save or delete routes or start
navigation.
New route
›
In the main Navigation menu, tap the function surface → Routes → New route.
Insert a route destination in one of the following ways.
›
Tap on the function surface Enter destination and enter a new destination.
›
or: Tap on the function surface Destinations and select a destination from the
list of stored destinations.
›
To save the created route, tap the function surface Store.
›
To start route guidance, tap the function surface Start.
Route import
A prerequisite for importing the route is that “Infotainment Online”
services are activated.
A route that has been created in the user profile on the “ŠKODA Connect
Portal” website and sent to the Infotainment system can be imported into the
Infotainment memory even before switching on the ignition .
If the route was created when the ignition was switched on and sent to Info-
tainment, Infotainment is not imported until after switching off (for at least 15
minutes) and after switching the ignition back on again.
›
Switch on the ignition. When a new route is available, a message regarding
the option to import this route appears in the Infotainment screen automati-
cally.
If the user opts not to import the route immediately, the route can be impor-
ted manually later, as follows.
›
In the main Navigation menu, tap the function surface → Routes Tap to
check if a new route is available.
›
or: Press the
button, then tap on function surface → .
›
Tap the function surface Import routes.
If a new route is available, a message will be displayed by the Infotainment sys-
tem.
›
Tap the function surface Retrieve to start route guidance.
After being successfully imported, the route is displayed in the list of saved
routes.
Managing saved routes
›
In the main Navigation menu, tap the function surface → routes .
›
Choose the desired route, and then select one of the following functions.
- delete the stored route
- Edit the route
- Calculate route and start route guidance
Traffic reports
List of traffic reports
Fig. 177
List of traffic reports
Delete
Edit
Start
152
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
The Infotainment system enables the reception of traffic reports, which in-
clude information regarding traffic congestion, using TMC (Traffic Message
Channel) or online (when “Infotainment Online”
services are activa-
ted).
ŠKODA AUTO does not accept responsibility for the availability, content, up-
to-dateness or evaluation of TMC traffic reports or other data provided by
third parties. ŠKODA AUTO is not entitled to examine or adapt this data in any
way. The data can only be edited by Infotainment in areas where it is available.
›
To display the list of traffic reports, press the
button then tap the func-
tion surface .
In the list of traffic messages and the map, a max. of 6 messages are displayed,
that are provided with a letter and a traffic obstruction symbol (e.g. , , )
A
.
The traffic reports available on the route are indicated by a navigation an-
nouncement.
Source of traffic information
At position
C
, the following symbols can be displayed.
TMC Traffic Information (when the symbol is crossed out, the Infotain-
ment system is out of range of any traffic information provider)
Online traffic report
Display options
▶
Route guidance is not taking place - All traffic messages are displayed.
▶
Route guidance is taking place - After tapping function surface
B
in the displayed menu, you can select all traffic messages by tapping the
function surface All areas, or you can select only the traffic messages present
on the route by tapping the function surface Route.
A traffic report may contain some of the following information.
▶
Symbol of the traffic obstruction
▶
Number of the road affected
▶
Name of the location affected
▶
Description of the traffic obstruction
Colour differentiation of the importance of the traffic obstruction in a TMC
message
The symbol for the traffic obstruction (e.g. , , ) precedes the obstruction
and the length of the obstruction is shown in the map on the right along the
route.
Depending on the context, the symbol for the obstruction is displayed in one
of the following ways.
No route guidance is taking place
▶
Red - All traffic obstructions
Route guidance is not taking place
▶
Grey - The traffic obstruction is not on the route
▶
Red - The traffic obstruction is on the route, the route will not be recalcula-
ted and the route passes through the traffic obstruction
▶
Orange - The traffic obstruction is on the route, the route will be recalcula-
ted and an alternative route is available
Colour differentiation of the importance of a traffic obstruction from an
online message
The colour differentiation of traffic obstructions is dependent on the provider
of the online traffic reports.
To set the traffic obstructions display, go to the main Navigation menu and tap
the function surface → Map → Traffic flow settings.
Update
The list of traffic reports is continuously updated by the Infotainment system.
Details of the traffic report
Fig. 178
Details of the traffic report
The detail of the traffic message depends on the source of the traffic mes-
sage.
153
Navigation
-------------------------------------------------------------------------------------------------------------------------------------------------------------
›
To display this, select the desired traffic report from the list of traffic re-
ports.
›
or: Tap on the traffic obstruction icon in the map.
Depending on the context, the following information and functional surfaces
are displayed
.
Map of the affected location
Description of the traffic obstruction
Reception timing and information relating to the traffic report provider
(if “ŠKODA Connect” is the provider, it is an online traffic report)
Symbol of the traffic obstruction
Length of the traffic obstruction
Dynamic route
The Infotainment system allows an evaluation of the traffic reports received
during the route guidance. If the following conditions are met, a bypass route
is calculated and the appropriate announcement is issued.
The dynamic route function is turned on.
The traffic obstruction included in the traffic information is on the route.
The traffic obstruction is evaluated by the Infotainment system as being
significant.
›
To activate/deactivate, go to the main Navigation menu and tap on the func-
tion surface → Route options → Dynamic route.
Entering/removing a traffic obstruction on the route manually
If a traffic obstruction is detected during route guidance (e.g. traffic jam), this
traffic obstruction can be entered into the route manually.
Once entered, the Infotainment system recalculates and provides an alterna-
tive route.
Enter traffic obstruction
›
In the main Navigation menu, tap the function surface → Congestion ahead.
›
Adjust the length of the traffic obstruction.
The traffic obstruction is displayed in red in the map to the right along the
route.
A
B
C
D
E
Remove traffic obstruction
The traffic obstruction is removed from the route after completion of the
route guidance or can manually be removed as follows.
›
In the main Navigation menu, tap the function surface → Delete "congestion
ahead".
154
Infotainment
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Vehicle systems
CAR - Vehicle settings
Introduction to the subject
Applies to Infotainment Columbus, Amundsen.
In the CAR menu, you can display driving data and vehicle information and can
configure some vehicle systems.
Reset to factory settings
You can reset the factory settings in the Infotainment system in menu
→
→ Factory settings menu.
Note
Settings relating to the vehicle systems can only be made when the ignition is
switched on.
Main menu
Fig. 179
Function surfaces in the main
menu
›
Press the
button to display the main menu with the following function
surfaces
.
Select the following menu points
▶
Journey data
▶
DriveGreen
▶
Vehicle status
Operating playback - Radio/Media
Operating heated windscreen
Vehicle system settings
155
Vehicle systems
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст