Lifan 620. Manual — part 18
Table 1-55 (Continued)
S/N Operation Test
Results
Actions
Yes Next
step
10
Clean the fuel injector and check the fuel injector for
normal operation.
No
Replace fuel injector
Yes Renew
fuel
11
Check if the fuel is wrong or contains water.
No 17
Yes Next
step
73
6. Unstable idle speed at any time
Table 1-56
S/N Operation Test
Results
Actions
Yes
Remove the trouble
1
Turn the ignition switch to ON. Check if there is trouble
information records with a diagnostic instrument.
No Next
step
Yes
Replace idle speed actuator
2
Check if the idle speed actuator or the stepper motor
idle speed actuator is locked.
No Next
step
3
4
5
6
7
8
9
pin J1-47 and the pin J1-73 of the fuel bump relay, and
run the fuel pump. Check if the fuel pressure is about
380kPa.
No 13
Yes 12
10
Connect the battery and the fuel injector with a special
connector. With the voltage supply of 12V, check the fuel
injector for normal operation.
No Next
step
Yes Next
step
11
Clean the fuel injector and check the fuel injector for
normal operation.
No
Replace fuel injector
74
Table 1-56 (Continued)
S/N Operation Test
Results
Actions
Yes Replace
fuel
12
Check if the fuel is wrong or contains water.
No 18
Yes Next
step
13
Check if the fuel pressure is lower than 380kPa.
No 17
Yes Next
step
14
Close the fuel gauge valve. Turn on the ignition switch
15
16
17
18
19
20
21
No
Remove the trouble
75
7. Unstable idle speed during warm-up
Table 1-57
S/N Operation Test
Results
Actions
Yes
Remove the trouble
1
Turn the ignition switch to ON. Check if there is trouble
information records with a diagnostic instrument.
No Next
step
Yes Next
step
2
3
4
5
6
1
Yes Next
step
2
between the ECU and the harness. Check the voltage of
the pin J1-42 (intake air manifold absolute pressure
sensor output), J1-27 (intake air temperature sensor
output), J1-43 (coolant temperature sensor output),
J1-62, J1-06, J1-38 (oxygen sensor output), J1-54,
J1-33, J1-53, J1-34 (output to idle speed actuator) of the
the ECU. Is the voltage normal?
No
Repair or replace harness
Yes Next
step
3
Check the air filter for smoothness.
No Replace
76
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст