Lifan 620. Manual — part 22
2. Start failure of the engine
Common trouble location:
1. No fuel in the tank; 2. Fuel pump; 3. Rotation speed sensor;
4. Ignition coil; 5. Mechanical part of the engine
Diagnosis Flow
Table 1-68
S/N Operation Test
Results
Actions
1
2
3
4
5
89
3. Difficult to start after warm-up
Common trouble location:
1. Fuel with water; 2. Fuel pump; 3. Coolant temperature sensor;
4. Fuel pressure regulator vacuum pipe; 5. Ignition coil.
Diagnosis Flow
Table 1-69
S/N Operation Test
Results
Actions
1
2
3
4
5
6
the pin 3#, 51#, 53#, 61#, 80#. Are they OK?
90
4. Difficult cold start
Common trouble location:
1. Fuel with water; 2. Fuel pump; 3. Coolant temperature sensor; 4. Fuel injector;
5. Ignition coil; 6. Throttle body and idle speed by-pass air way;
7. Mechanical part of the engine.
Diagnosis Flow
Table 1-70
1
2
3
4
5
6
Yes
Remove the mechanical
troubles for the engine
7
Check the pressure of each cylinder of the engine.
Check if the pressure is enough.
No Next
step
Yes Diagnosis
help
8
Connect the electronic injection system adapter. Turn on
the ignition switch. Check the power supply of the pin
12#, 13#, 44#, 45#, 63#. Check the grounding of the pin
3#, 51#, 53#, 61#, 80#. Are they OK?
No
Check and repair relevant
line
91
5. With normal rotation speed, difficult to start at any time
Common trouble location:
1. Fuel with water; 2. Fuel pump; 3. Coolant temperature sensor;
4. Fuel injector; 5. Ignition coil; 6. Throttle body and idle speed by-pass air way;
7. Intake air way; 8. Ignition timing; 9. Spark plug. 10: Mechanical part of the engine.
Diagnosis Flow
Table 1-71
S/N Operation Test
Results
Actions
1
2
3
4
5
6
7
leakage or blockage with a special fuel injector
cleaner & analyzer.
No Next
step
Yes Replace
fuel
8
Check the fuel for normal operation.
No Next
step
Yes
Remove the mechanical
troubles for the engine
9
Check the pressure of each cylinder of the engine.
Check if the pressure is enough.
No Next
step
92
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст