Infiniti M35 (2010 year). Manual — part 11
START-UP SCREEN (models with
navigation system)
When you push the ignition switch to the ACC or
ON position, the SYSTEM START-UP warning is
displayed on the screen. When you read and
agree with the warning, push the
ENTER button.
If you do not push the
ENTER button, you will
not be able to use the NAVI system.
To proceed to the NAVI system, refer to the
separate Navigation System Owner’s Manual.
START MENU (models with navigation
system)
The start menu can be displayed using the
ENTER switch on the steering-wheel-mounted
controls.
1. While the map (if so equipped) or status
screen is displayed, push and hold the
ENTER switch until the “Menu Options”
screen appears.
2. Highlight the preferred item by tilting the
ENTER switch up or down, and then push
the
ENTER switch to select.
Available items
Destination/Route :
These items are for the navigation system. If
your vehicle is equipped with the navigation
system, see the separate Navigation System
Owner’s Manual for details.
Information :
Displays the information screen. It is the same
screen that appears when you push the
INFO
button.
Settings :
Displays the settings screen. It is the same
screen that appears when you push the
SET-
TING button.
SAA1454
SAA1471
SAA1591
4-6
Monitor, climate, audio, phone and voice recognition systems
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO SELECT MENUS ON THE
SCREEN
Vehicle functions are viewed on the display
screen in menus. Whenever a menu selection is
made or menu item is highlighted, different
areas on the screen provide you with important
information. See the following for details.
1. Header:
Shows the path used to get to the current
screen. (i.e. push SETTING button > choose
“Comfort & Conv.” menu item.)
2. Menu Selections:
Shows the options to choose within that
menu screen. (i.e. Auto Interior Illumination,
etc.)
3. UP/DOWN Movement indicator:
Shows that the INFINITI controller may be
used to move UP/DOWN on the screen and
select more options.
4. Screen Count:
Shows the number of menu selections avail-
able for that screen (i.e. 1/9).
5. Footer/Information Line:
Provides more information (if available)
about the menu selection currently high-
lighted. (i.e.
Cabin lighting when un-
locking doors.)
HOW TO USE STATUS BUTTON
To display the status of the audio, climate
control system, fuel consumption and naviga-
tion system (if so equipped), push the
STATUS
button. The following information will appear
when the
STATUS button is pushed.
Audio
→ Audio and Climate control system →
Audio and fuel consumption
→ Audio and Navi-
gation system (if so equipped)
→ Audio
HOW TO USE BRIGHTNESS CONTROL
AND DISPLAY ON/OFF BUTTON
Push the “
OFF ” button to switch the
display brightness to the daytime mode or the
nighttime mode, and to adjust the display
brightness using the INFINITI controller while
the indicator is displayed at the bottom of the
screen.
The display brightness can also be adjusted
using the brightness UP button (+) or bright-
ness DOWN button (
2) (models without naviga-
tion system).
Push and hold the “
OFF ” button for more
than 2 seconds to turn the display off. Push the
button again to turn the display on.
SAA1510
VEHICLE INFORMATION AND SETTINGS
Monitor, climate, audio, phone and voice recognition systems
4-7
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO USE DISP BUTTON (models
without navigation system)
Push the
DISP button to show the display
setting screen. (See “Display settings” later in
this section.)
HOW TO USE TRIP BUTTON (models
without navigation system)
Push the
TRIP button to show the trip computer
display. (See “Trip Computer information” later
in this section.)
HOW TO USE FUEL ECON BUTTON
(models without navigation system)
Push the
FUEL ECON button to show the fuel
economy information. (See “Fuel Economy infor-
mation” later in this section.)
HOW TO USE INFO BUTTON
The display screen shows vehicle and naviga-
tion (if so equipped) information for your con-
venience.
The information shown on the screen should be
a guide to determine the condition of the ve-
hicle. See the following for details.
Vehicle information display
1. Push the
INFO button on the control panel.
2. Choose an item using the INFINITI control-
ler and push the
ENTER button.
3. After viewing or adjusting the information
on the following screens, push the
BACK
button to return to the INFORMATION
menu.
See the separate Navigation System Owner’s
Manual for the following items:
● Traffic Info.
● Where am I?
● GPS Satellite Info.
With navigation system
SAA1803
Without navigation system
SAA1805
4-8
Monitor, climate, audio, phone and voice recognition systems
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Fuel Economy information
The distance to empty, average fuel economy
and current fuel economy (shown on the right
side bar) will be displayed for reference.
To reset the Average Fuel Economy, use the
INFINITI controller to highlight the “
Reset ” key
and push the
ENTER button.
If the “
View ” key is highlighted with the
INFINITI controller and the
ENTER button is
pushed, the average fuel consumption history
will be displayed in graph form along with the
average for the previous Reset-to-Reset period.
The unit can be converted between “US” and
“Metric”. (See “HOW TO USE SETTING BUTTON”
later in this section.)
For models without the navigation system, the
information can be displayed by pushing the
FUEL ECON button on the control panel.
Tire Pressure information
The tire pressure will be displayed for refer-
ence.
The pressure indication “** psi” on the screen
means that the tire pressure is being measured.
After a few driving trips, the pressure for each
tire will be displayed.
In case of low tire pressure, LOW PRESSURE
information will be displayed on the screen.
Check the pressure for all tires.
Tire pressure rises and falls depending on the
heat caused by the vehicle’s traveling condition
and the temperature.
SAA1546
SAA1547
SAA1450
Monitor, climate, audio, phone and voice recognition systems
4-9
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
After tire rotation is performed, tire pressure
will not be displayed in the actual tire position.
Drive the vehicle at over 25 MPH (40 km/h) for
approximately 10 minutes to reset the display.
For more details about the Tire Pressure Moni-
toring System (TPMS), see “TIRE PRESSURE
MONITORING SYSTEM (TPMS)” in the “5. Start-
ing and driving” section.
WARNING
● When a spare tire is mounted or a wheel is
replaced, tire pressure will not be indicated,
the TPMS will not function and the low tire
pressure warning light will flash for approxi-
mately 1 minute. The light will remain on
after 1 minute. Contact your INFINITI retailer
as soon as possible for tire replacement
and/or system resetting.
● Replacing tires with those not originally
specified by INFINITI could affect the proper
operation of the TPMS.
Trip Computer information
Elapsed Time, Driving Distance and Average
Speed will be displayed.
To reset each set of trip computer information,
use the INFINITI controller to highlight the “
Re-
set ” key and push the ENTER button.
The unit can be converted between “US” and
“Metric”. (See “HOW TO USE SETTING BUTTON”
later in this section.)
With navigation system
SAA1806
Without navigation system
SAA1305
4-10
Monitor, climate, audio, phone and voice recognition systems
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Maintenance information
The maintenance intervals can be displayed for
your desired maintenance items.
To set the maintenance interval for Reminders 1
to 4, choose an item using the INFINITI control-
ler and push the
ENTER button.
You can also set to display a message to remind
you that the maintenance needs to be per-
formed.
The following example shows how to set Re-
minder 1. Use the same steps to set the other
maintenance information.
1. Reset the driving distance to the new
maintenance schedule.
2. Set the interval (mileage) of the mainte-
nance schedule. To determine the recom-
mended maintenance interval, refer to
your “INFINITI Service and Maintenance
Guide”.
3. To display the reminder automatically
when the set trip distance is reached,
highlight the “
Interval Reminder ” key
with the INFINITI controller and push the
ENTER button.
4. To return the display to MAINTENANCE
INFO., push the
BACK button.
With navigation system
SAA1554
Without navigation system
SAA1807
With navigation system
SAA1555
Monitor, climate, audio, phone and voice recognition systems
4-11
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Maintenance information display cannot be op-
erated when the vehicle is moving. Stop the
vehicle in a safe place to see the information.
The unit can be converted between “US” and
“Metric”. (See “HOW TO USE SETTING BUTTON”
later in this section.)
The Reminder will be automatically displayed as
shown when both of the following conditions
are met:
● the vehicle is driven the set distance and the
ignition switch is pushed to the LOCK posi-
tion.
● the ignition switch is pushed to the ACC or
ON position the next time you drive the
vehicle after the set value has been reached.
To return to the previous display after the
maintenance reminder screen is displayed,
push the
BACK button.
The maintenance reminder screen is displayed
each time the ignition switch is pushed to the
ON position unless one of the following opera-
tions is performed:
● “Reset Distance” is selected.
● “Interval Reminder” is set to OFF.
● the maintenance interval is set again.
SAA1611
4-12
Monitor, climate, audio, phone and voice recognition systems
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Others information (models with
navigation system)
Select the
“Others” key and push the ENTER
button to show “Voice Recognition” and “Navi-
gation Version”.
Voice Recognition information
(models with navigation system)
When you use the INFINITI Voice Recognition
system for the first time or if you do not know
how to operate it, you can display the voice
command list or user guide for confirmation.
(See “INFINITI VOICE RECOGNITION SYSTEM
(models with navigation system)” later in this
section for the details.)
Command List :
Displays a list of voice commands that the
system can recognize.
User Guide :
Displays a simplified operation manual of the
voice recognition system and how to use the
voice commands.
Navigation Version information
(models with navigation system)
The version of the navigation system will be
displayed.
SAA1808
SAA1592
Monitor, climate, audio, phone and voice recognition systems
4-13
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WARNING DISPLAY
The warning display will appear when one of the
following conditions occurs while driving at a
speed over 3 MPH (5 km/h).
● Any door is not securely closed. (The corre-
sponding door will be indicated on the dis-
play.)
● The trunk lid is not securely closed.
The warning display will turn off when the
vehicle speed slows down under 3 MPH (5
km/h) even if a door or trunk lid is not securely
closed yet.
Make sure to stop the vehicle and close a door
or trunk lid securely.
SAA1187
SAA1188
With navigation system
SAA1804
Without navigation system
SAA1514
4-14
Monitor, climate, audio, phone and voice recognition systems
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO USE SETTING BUTTON
The display for vehicle settings will appear
when the
SETTING button on the control panel
is pushed.
For navigation settings, refer to the separate
Navigation System Owner’s Manual.
For the “Comfort and Conv.” settings, the igni-
tion switch must be in the ON position.
Audio settings
The following display will appear when pushing
the
SETTING button, selecting the “Audio ” key
with the INFINITI controller and pushing the
ENTER button.
Bass/Treble/Balance/Fade :
To adjust the speaker tone quality and sound
balance, select the “
Bass ”, “Treble ”, “Balance
” or “
Fade ” key and adjust it with the INFINITI
controller.
These items can also be adjusted by pushing
and turning the AUDIO knob.
BOSET CenterpointT (if so equipped) :
When this item is turned to ON, an exciting
surround sound is generated from a traditional
stereo recording.
BOSET AudioPilotT (if so equipped) :
When this item is turned to ON, AudioPilot
T
monitors noise in the passenger compartment
with a microphone and compensates for any
unpleasant noise.
Surround Volume (if so equipped) :
To adjust the surround sound volume, select
“Surround Vol.” and adjust it with the INFINITI
controller.
With navigation system
SAA1809
Without navigation system
SAA1810
Monitor, climate, audio, phone and voice recognition systems
4-15
w
—
—
05/19/09—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Precision Phased Audio (if so equipped) :
When this item is turned to ON, super high pitch
sound and super low pitch sound are empha-
sized and midrange sound is played naturally.
Speed Sensitive Vol. (if so equipped) :
Sound volume is increased according to the
vehicle speed. Choose the effect level from OFF
(0) to 5.
Display settings
The following display will appear when pushing
the
SETTING button, selecting “Display ” key
with the INFINITI controller and pushing the
ENTER button.
For models without the navigation system, the
setting screen can be displayed by pushing the
DISP button on the control panel.
Display :
To turn off the screen, push the
ENTER button
and turn the “Display” indicator off. The other
method is to push and hold the “
OFF ”
button for more than 2 seconds.
When any mode button is pushed with the
screen off, the screen turns on for further
operation. The screen will turn off automatically
5 seconds after the operation is finished.
To turn on the screen, set this item to the ON
position, or push the “
OFF ” button.
Brightness/Contrast/Background Color :
To adjust the brightness and contrast of the
screen, select the “
Brightness ” or “Contrast ”
key and push the
ENTER button.
Then, you can adjust the brightness to “Darker”
or “Brighter”, and the contrast to “Lower” or
“Higher” using the INFINITI controller.
For information on the “
Background Color ” key,
refer to the separate Navigation System Own-
er’s Manual.
Navigation settings (models with
navigation system)
For the details of “Navigation” settings, refer to
the separate Navigation System Owner’s
Manual.
With navigation system
SAA1813
4-16
Monitor, climate, audio, phone and voice recognition systems
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Rear Display settings (if so equipped)
The following display will appear when pushing
the
SETTING button, selecting the “Rear Dis-
play” key with the INFINITI controller and push-
ing the
ENTER button.
Rear Display :
To open the rear display, push the
ENTER
button. The rear display is flipped down auto-
matically. To close the rear display, push the
ENTER button and turn the “OK” indicator off.
The rear display will be closed automatically
when the ignition switch is pushed to the LOCK
position.
The rear display can be also opened or closed
using the remote controller. (See “INFINITI MO-
BILE ENTERTAINMENT SYSTEM (MES)” later in
this section.)
Volume and Beeps settings (models
with navigation system)
The following display will appear when pushing
the
SETTING button, selecting the “Volume and
Beeps ” key with the INFINITI controller and
pushing the
ENTER button.
Guidance Vol. :
To adjust the guidance voice volume louder or
softer, select the “Guidance Volume” and ad-
just it with the INFINITI controller.
You can also adjust the guidance voice volume
by turning the VOLUME control knob while voice
guidance is being announced.
SAA2146
SAA1561
Monitor, climate, audio, phone and voice recognition systems
4-17
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Guidance Voice :
When this item is turned to ON, you will hear
voice guidance in the navigation (if so
equipped) operation or in other operations.
Ringer Vol./Incoming Call/Outgoing Call :
For
the
details
of
these
items,
see
“BLUETOOTH
T HANDS-FREE PHONE SYSTEM
WITH NAVIGATION SYSTEM” later in this sec-
tion.
Button Beeps :
When this item is turned to ON, you will hear a
beep sound when you use a button.
Beeps settings (models without
navigation system)
The following display will appear when pushing
the
SETTING button, selecting the “Beeps ” key
with the INFINITI controller and pushing the
ENTER button.
Button Beeps :
When this item is turned to ON, you will hear a
beep sound when you use a button.
Phone settings (models with
navigation system)
For the details of “Phone” settings, see
“BLUETOOTH
T HANDS-FREE PHONE SYSTEM
WITH NAVIGATION SYSTEM” later in this section.
Clock settings (models with
navigation system)
The following display will appear when pushing
the
SETTING button, selecting the “Clock ” key
with the INFINITI controller and pushing the
ENTER button.
On-screen Clock :
When this item is turned to ON, a clock is
always displayed in the upper right corner of
the screen.
This clock will indicate the time almost exactly
because it is always adjusted by the GPS sys-
tem.
SAA1612
SAA1563
4-18
Monitor, climate, audio, phone and voice recognition systems
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Clock Format :
Choose either the 12-hour clock display or the
24-hour clock display.
Offset Adjust :
Adjust the time by increasing or decreasing per
minute.
Daylight Saving Time :
Turn this item to ON for daylight saving time
application.
Time Zone :
Choose the time zone from the following
● Pacific
● Mountain
● Central
● Eastern
● Atlantic
● Newfoundland
● Hawaii
● Aleutian
● Alaska
Others settings (models with
navigation system)
Select the “
Others ” key and push the ENTER
button to show “Comfort & Conv.”, “Voice Rec-
ognition” and “Language/Units”.
Comfort & Conv. settings
The following display will appear when pushing
the
SETTING button, selecting the “Comfort &
Conv. ” key* with the INFINITI controller and
pushing the
ENTER button. This key does not
appear on the display until the ignition switch is
pushed to the ON position.
* For models with the navigation system, select
the “
Others ” key to show the Comfort & Conv.
” key.
Auto Interior Illumination :
When this item is turned to ON, the interior
lights will illuminate if any door is unlocked.
SAA1815
Example
SAA1933
Monitor, climate, audio, phone and voice recognition systems
4-19
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Auto Headlights Sensitivity (if so equipped) :
Adjust the sensitivity of the automatic head-
lights higher (right) or lower (left).
Auto Headlights Off Delay (if so equipped) :
Choose the duration of the automatic headlight
off timer from 0, 30, 45, 60, 90, 120, 150 and
180 second periods.
Selective Door Unlock :
When this item is turned to ON, only the driver’s
door is unlocked first after the door unlock
operation. When the door handle request
switch on the driver’s or front passenger’s side
door is pushed to be unlocked, only the corre-
sponding door is unlocked first. All the doors
can be unlocked if the door unlock operation is
performed again within 5 seconds.
When this item is turned to OFF, all the doors
will be unlocked after the door unlock operation
is performed once.
Intelligent Key Lock/Unlock :
When this item is turned to ON, door
lock/unlock function by pushing the door
handle request switch will be activated.
Lift Steering Wheel on Exit (if so equipped) :
When this item is turned to ON, the steering
wheel moves upward for easy exit if the ignition
switch is in the LOCK position and the driver’s
door is opened. After getting into the vehicle
and pushing the ignition switch to the ACC
position, the steering wheel moves to the pre-
vious position.
Slide Driver Seat Back on Exit (if so equipped) :
When this item is turned to ON, the driver’s seat
moves backward for easy exit if the ignition
switch is in the LOCK position and the driver’s
door is opened. After getting into the vehicle
and pushing the ignition switch to the ACC
position, the driver’s seat moves to the previous
position.
Return All Settings to Default :
Select this item, push the
ENTER button and
choose “YES” if you want to return all settings
to the default.
Voice Recognition settings (models
with navigation system)
For details about the “Voice Recognition” set-
tings, see “INFINITI VOICE RECOGNITION SYS-
TEM (models with navigation system)” later in
this section.
Language/Units settings
The following display will appear when pushing
the
SETTING
button,
selecting
the
“
Language/Units ” key* with the INFINITI con-
troller and pushing the
ENTER button.
* For models with the navigation system, select
the “
Others ” key to show the Language/Units
” key.
Select Language :
Choose the “
Select Language ” key and push
the
ENTER button. From the following display,
select “English”, “Français” or “Español”* for
your favorite display appearance.
With navigation system
SAA1816
4-20
Monitor, climate, audio, phone and voice recognition systems
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
NOTE:
If you select the “Français” key, French language
will be displayed. For more detail, refer to the
French Owner’s Manual. To obtain a French Own-
er’s
Manual,
please
see
“OWNER’S
MANUAL/SERVICE MANUAL ORDER INFORMA-
TION” in the “9. Technical and consumer infor-
mation” section.
*: For models without navigation system only
Select Units :
Choose the “
Select Units ” key and push the
ENTER button. From the following display, se-
lect “US” (Mile, °F, MPG) or “Metric” (km, °C,
L/100 km) for your favorite display appearance.
Select Units (Tire Pressure) :
Choose the “
Select Units (Tire Pressure) ” key
and push the
ENTER button. From the following
display, select “kPa” or “psi”.
HOW TO USE AUX BUTTON
Images being played can be switched to the
center display if NTSC compatible devices are
connected to the auxiliary input jacks on the
rear side of the center console. (See “AUXILIARY
INPUT JACKS” later in this section.)
Push the
DISC·AUX (with navigation) AUX (with-
out navigation) button to perform switching.
Pushing the
DISC·AUX button (for models with
the navigation system) will switch the displays
as follows:
CD
→ CompactFlash* → DVD* → AUX → iPodT*
→ Music Box* → CD
*: if so equipped
Display Mode
The above display will appear when the “
Set-
tings ” key is selected using the INFINITI con-
troller and pushing the
ENTER button.
Choose the display mode from the following:
● Normal
● Wide
● Cinema
Images can only be shown on the front display
when the vehicle is stopped and the parking
brake is applied.
With navigation system
SAA1567
Monitor, climate, audio, phone and voice recognition systems
4-21
w
—
—
05/19/09—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст