Infiniti M35 (2010 year). Manual — part 10
WARNING
● Do not adjust the steering wheel while driv-
ing. You could lose control of your vehicle
and cause an accident.
● Do not adjust the steering wheel any closer
to you than is necessary for proper steering
operation and comfort. The driver’s air bag
inflates with great force. If you are unre-
strained, leaning forward, sitting sideways
or out of position in any way, you are at
greater risk of injury or death in a crash. You
may also receive serious or fatal injuries
from the air bag if you are up against it when
it inflates. Always sit back against the seat-
back and as far away as practical from the
steering wheel. Always use the seat belts.
TILT OR TELESCOPIC OPERATION
Move the lever to adjust the steering wheel up
or down, forward or rearward to the desired
position.
Entry/Exit function operation
The automatic drive positioner system will
make the steering wheel move up automatically
when the driver’s door is opened with the
ignition switch in the LOCK position. This lets
the driver get into and out of the seat more
easily.
For more information, see “AUTOMATIC DRIVE
POSITIONER” later in this section.
SPA2018
SPA2057
TILT/TELESCOPIC STEERING
SUN VISORS
3-22
Pre-driving checks and adjustments
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
CAUTION
● Do not store the main sun visor before stor-
ing the sub-sun visor and the extension sun
visor.
● Do not pull the sub-sun visor and the exten-
sion sun visor forcedly downward.
1. To block out glare from the front, swing
down the main sun visor
s
1
.
2. To block glare from the side, remove the
main sun visor from the center mount and
swing it to the side
s
2
.
3. To block glare from the front, swing down
the sub-sun visor
s
3
.
4. Draw out the extension sun visor
s
4
from
the main sun visor to block from further
glare.
INSIDE MIRROR
Adjust the height and the angle of the inside
mirror to the desired position.
SPA2447
Type A
SPA2422A
Type B
SPA2450
MIRRORS
Pre-driving checks and adjustments
3-23
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Automatic anti-glare type
The inside mirror is designed so that it auto-
matically changes reflection according to the
intensity of the headlights of the following
vehicle.
The anti-glare system will be automatically
turned on when the ignition switch is pushed to
the ON position.
When the anti-glare system is turned on, the
indicator light
s
A
will illuminate and excessive
glare from the headlights of the vehicle behind
you will be reduced.
Type A: Push the
switch
s
B
to make the
inside rearview mirror operate normally and the
indicator light will turn off. Push the
switch again to turn the system on.
Type B: Push the “
C” switch
s
C
to make the
inside rearview mirror operate normally. The
indicator light will turn off. Push the “I” switch
s
D
to turn the system on.
Do not allow any object to cover the sensors
s
E
or apply glass cleaner on them. Doing so will
reduce the sensitivity of the sensor, resulting in
improper operation.
For the compass (if so equipped) operation, see
“COMPASS” in the “2. Instruments and con-
trols” section.
For the HomeLink
T Universal Transceiver opera-
tion, see “HomeLink
T UNIVERSAL TRANS-
CEIVER” in the “2. Instruments and controls”
section.
OUTSIDE MIRRORS
WARNING
Objects viewed in the outside mirror on the
passenger side are closer than they appear. Be
careful when moving to the right. Using only
this mirror could cause an accident. Use the
inside mirror or glance over your shoulder to
properly judge distances to other objects.
Adjusting outside mirrors
The outside mirror control switch is located at
the lower part of the instrument panel.
The outside mirror will operate only when the
ignition switch is in the ACC or ON position.
SPA2214
3-24
Pre-driving checks and adjustments
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Move the switch right
s
1
or left
s
2
to select the
right or left side mirror, then adjust
s
3
using
the control switch.
Defrosting outside mirrors (if so
equipped)
The outside mirrors will be heated when the
rear window defroster switch is operated. (See
“REAR WINDOW AND OUTSIDE MIRROR DE-
FROSTER SWITCH” in the “2. Instruments and
controls” section.)
Foldable outside mirrors
Fold the outside mirror by pushing it toward the
rear of the vehicle.
Reverse tilt-down feature
When backing up the vehicle, the right or left
outside mirror will turn downward automatically
to provide better rear visibility.
1. Push the ignition switch to the ON posi-
tion.
2. Move the selector lever to the R (Reverse)
position.
3. Choose the right or left outside mirror by
operating the outside mirror control
switch.
4. The selected outside mirror surface
moves downward.
When one of the following conditions has oc-
curred, the selected outside mirror surface will
return to its original position.
● The selector lever is moved to any position
other than R (Reverse).
● The outside mirror control switch is set to
the center position.
● The ignition switch is pushed to the LOCK
position.
For more information regarding this feature and
how to save the R (Reverse) mirror tilt-down
adjustment in the automatic drive positioner
memory, see “Automatic drive positioner” later
in this section.
SPA1829
Pre-driving checks and adjustments
3-25
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
The automatic drive positioner system has the
following features:
● Entry/exit function
● Memory storage
ENTRY/EXIT FUNCTION
This system is designed so that the driver’s seat
and steering column will automatically move
when the selector lever is in the P (Park)
position. This allows the driver to get into and
out of the driver’s seat more easily.
The driver’s seat will slide backward and the
steering wheel will move up when the driver’s
door is opened with the ignition switch in the
LOCK position.
The driver’s seat and steering wheel will return
to the previous positions when one of the
following is operated:
● When the ignition switch is pushed to the
ACC position after the driver’s door is
closed.
● When the ignition switch is pushed to the
ON position.
● When the Intelligent Key is inserted into the
port after the driver’s door is closed.
The driver’s seat will not return to the previous
positions if the seat or steering adjusting
switch is operated when the seat is at the exit
position.
Cancel or activate entry/exit function
To cancel or activate the entry/exit function, the
selector lever must be in the P (Park) position
with the ignition switch in the LOCK position.
Push and hold the SET switch for more than 10
seconds to cancel or activate the entry/exit
function.
The indicator lights on the memory switches (1
and 2) will blink once when the function is
canceled, and the indicator lights will blink
twice when the function is activated.
The entry/exit function can also be canceled or
activated if the “Lift Steering Wheel on Exit” key
or “Slide Driver Seat Back on Exit” key is turned
to ON or OFF in the “Comfort & Conv.” settings.
(See “VEHICLE INFORMATION AND SETTINGS” in
the “4. Monitor, climate, audio, phone and
voice recognition systems” section.)
Initialize entry/exit function
If the battery cable is disconnected, or if the
fuse opens, the entry/exit function will not work
though this function was set on before. In such
a case, after connecting the battery or replacing
with a new fuse, open and close the driver’s
door more than two times after the ignition
switch is pushed to the ON position once, then
pushed to the LOCK position. The entry/exit
function will be activated.
AUTOMATIC DRIVE POSITIONER
3-26
Pre-driving checks and adjustments
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MEMORY STORAGE
Two positions for the driver’s seat, steering
column and outside mirrors can be stored in the
automatic drive positioner memory. Follow
these procedures to use the memory system.
1. Move the selector lever to the P (Park)
position.
2. Push the ignition switch to the ON posi-
tion.
3. Adjust the driver’s seat, steering column
and outside mirrors to the desired posi-
tions by manually operating each adjust-
ing switch. For additional information, see
“SEATS” in the “1. Safety — Seats, seat
belts and supplemental restraint system”
section and “TILT/TELESCOPIC STEERING”
page 3-22 and “OUTSIDE MIRRORS” ear-
lier in this section.
4. Push the SET switch and, within 5 sec-
onds, push the memory switch (1 or 2)
fully for at least 1 second.
The indicator light for the pushed memory
switch will stay on for approximately 5 sec-
onds after pushing the switch.
If memory is stored in the same memory switch,
the previous memory will be deleted.
Procedure for storing the outside
mirror positions for best visibility at
reverse tilt-down feature
Two outside mirror positions for backing up can
be stored in the automatic drive positioner
memory.
1. Apply the parking brake.
2. Push the ignition switch to the ON posi-
tion. (Do not start the engine.)
3. Push the memory switch (1 or 2) fully for
at least 1 second to operate the automatic
drive positioner.
4. Turn the outside mirror control switch to L
(left).
5. Depress the brake pedal.
6. Move the selector lever to the R (Reverse)
position.
7. Adjust the mirror to the desired viewing
position for backing up by operating the
outside mirror control switch.
8. Push the SET switch and, within 5 sec-
onds, push the memory switch (1 or 2)
selected in step 3 fully for at least 1
second.
● The indicator light for the pushed memory
switch will stay on for approximately 5
seconds after pushing the switch. After
the indicator light goes off, the selected
mirror position is stored in the selected
memory (1 or 2).
9. Turn the outside mirror control switch to R
(right).
Repeat the above procedure to adjust the
right mirror position and store in the se-
lected memory.
● When the driver’s seat, outside mirror and
steering column are not in the memorized
SPA2020
Pre-driving checks and adjustments
3-27
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
position, the outside mirror will move with
the initial tilt-down angle, if the reverse
tilt-down position is stored.
Linking Intelligent Key to a stored
memory position
The Intelligent Key can be linked to a stored
memory position with the following procedure.
1. Follow the steps for storing a memory
position.
2. While the indicator light for the memory
switch being set is illuminated for 5 sec-
onds, push the
button on the Intel-
ligent Key. If the indicator light blinks, the
Intelligent Key is linked to that memory
setting.
Push the ignition switch to the LOCK position,
and push the
button on the Intelligent
Key. The driver’s seat, steering wheel and out-
side mirrors will move to the memorized posi-
tion.
Confirming memory storage
● Push the ignition switch to the ON position
and push the SET switch. If the main memory
has not been stored, the indicator light will
come on for approximately 0.5 second.
When the memory has stored in position, the
indicator light will stay on for approximately
5 seconds.
● If the battery cable is disconnected, or if the
fuse opens, the memory will be canceled. In
this case, reset the desired position using
the previous procedure.
● If optional Intelligent Keys are added to your
vehicle, perform the memory storage proce-
dure to switch (1 or 2) and linking Intelligent
Key procedure to a stored memory position
again for each Intelligent Key. For additional
Intelligent Key information, see “KEYS” ear-
lier in this section.
Selecting the memorized position
1. Move the selector lever to the P (Park)
position.
2. Use one of the following methods to move
the driver’s seat, steering column and
outside mirrors.
● Push the ignition switch to the ON posi-
tion and push the memory switch (1 or 2)
fully for at least 1 second.
● Within 45 seconds after opening the driv-
er’s door, push the memory switch (1 or 2)
fully for at least 1 second.
The driver’s seat, steering column and
outside mirrors will move to the memo-
rized position with the indicator light
flashing, and then the light will stay on for
approximately 5 seconds.
3-28
Pre-driving checks and adjustments
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SYSTEM OPERATION
The automatic drive positioner system will not
work or will stop operating under the following
conditions:
● When the vehicle speed is above 4 MPH (7
km/h).
● When the adjusting switch for the driver’s
seat and steering column is turned on while
the automatic drive positioner is operating.
● When the memory switch (1 or 2) is not
pushed for at least 1 second.
● When the seat, steering column and outside
mirrors have already been moved to the
memorized position.
● When no position is stored in the memory
switch.
● When the engine is started while the auto-
matic drive positioner is operating.
● When approximately 45 seconds have
passed after the driver’s door was opened
(ignition switch is not in the ON position).
● When the selector lever is moved from the P
(Park) position to any other position. (How-
ever, it will not be canceled if the switch is
pushed while the seat and steering column
are returning to the previous positions
(entry/exit function).)
Pre-driving checks and adjustments
3-29
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
3-30
Pre-driving checks and adjustments
MEMO
-------------------------------------------------------------------------------------------------------------------------------------------------------------
4 Monitor, climate, audio, phone and voice
recognition systems
How to use INFINITI controller . . . . . . . . . . . . . . . . . . . 4-4
How to use touch screen
(models with navigation system). . . . . . . . . . . . . . . . . 4-4
Start-up screen
(models with navigation system). . . . . . . . . . . . . . . . . 4-6
Start menu
(models with navigation system). . . . . . . . . . . . . . . . . 4-6
How to select menus on the screen . . . . . . . . . . . . . . 4-7
Vehicle information and settings. . . . . . . . . . . . . . . . . . . . 4-7
ON/OFF button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
How to use DISP button
(models without navigation system). . . . . . . . . . . . . . 4-8
How to use TRIP button
(models without navigation system). . . . . . . . . . . . . . 4-8
How to use FUEL ECON button
(models without navigation system). . . . . . . . . . . . . . 4-8
How to use INFO button . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Warning display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14
How to use SETTING button . . . . . . . . . . . . . . . . . . . . .4-15
How to use AUX button . . . . . . . . . . . . . . . . . . . . . . . . 4-21
How to use DISC button (for models
without navigation system). . . . . . . . . . . . . . . . . . . . . 4-22
Rearview monitor (if so equipped) . . . . . . . . . . . . . . . . . 4-22
How to read the displayed lines . . . . . . . . . . . . . . . . 4-23
How to park with predicted course lines. . . . . . . . . 4-23
Difference between predicted and actual
distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25
How to adjust the screen . . . . . . . . . . . . . . . . . . . . . . 4-27
Operating tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27
Ventilators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28
Automatic climate control . . . . . . . . . . . . . . . . . . . . . . . . . 4-29
Automatic climate control . . . . . . . . . . . . . . . . . . . . . . 4-30
Rear switches for climate control
Audio system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34
Audio operation precautions . . . . . . . . . . . . . . . . . . . 4-34
w
—
—
05/19/09—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
FM-AM-SAT radio with Compact Disc (CD)
player/changer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-43
CompactFlash (CF) player operation
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-47
iPod
T player operation (if so equipped) . . . . . . . . . 4-48
Music box hard-disk drive audio system
(models with navigation system). . . . . . . . . . . . . . . . 4-50
CD/CF (CompactFlash) care and cleaning . . . . . . . . 4-57
Steering-wheel-mounted controls for audio . . . . . . 4-58
Rear control switches for audio
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-60
Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-61
Auxiliary input jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-61
INFINITI Mobile Entertainment System (MES)
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-62
Digital Versatile Disc (DVD) system
components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-62
Before operating the DVD mobile
entertainment system. . . . . . . . . . . . . . . . . . . . . . . . . . 4-66
Playing a DVD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-68
Care and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 4-72
Car phone or CB radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-73
T Hands-Free Phone System with
navigation system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-74
Regulatory information. . . . . . . . . . . . . . . . . . . . . . . . . 4-75
Voice commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-76
Control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-76
Pairing procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-76
Phonebook registration . . . . . . . . . . . . . . . . . . . . . . . . 4-77
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-79
Receiving a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-80
During a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-80
Phone setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-81
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . 4-83
T Hands-Free Phone System without
navigation system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-84
Regulatory information. . . . . . . . . . . . . . . . . . . . . . . . . 4-85
Initialization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-85
Operating tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-85
Giving voice commands. . . . . . . . . . . . . . . . . . . . . . . . 4-86
Control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-87
Getting started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-87
Choosing a language . . . . . . . . . . . . . . . . . . . . . . . . . . 4-87
w
—
—
05/19/09—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Pairing procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-87
Making a call by entering a phone number . . . . . . 4-88
Receiving a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-88
List of voice commands . . . . . . . . . . . . . . . . . . . . . . . . 4-89
Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-89
During a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-90
Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-91
Memo pad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-93
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-93
Speaker Adaptation (SA) mode . . . . . . . . . . . . . . . . . 4-95
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . 4-97
INFINITI Voice Recognition system
(models with navigation system). . . . . . . . . . . . . . . . . . . 4-98
INFINITI Voice Recognition standard mode . . . . . . . 4-98
Using the system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-101
INFINITI Voice Recognition alternate
command mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-109
Using the system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-116
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . 4-120
w
—
—
05/19/09—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WARNING
● Do not disassemble or modify this system. If
you do, it may result in accidents, fire, or
electric shock.
● Do not use this system if you notice any
abnormality, such as a frozen screen or lack
of sound. Continued use of the system may
result in accident, fire or electric shock.
● In case you notice any foreign object in the
system hardware, spill liquid on it, or notice
smoke or smell coming from it, stop using
the system immediately and contact your
nearest INFINITI retailer. Ignoring such con-
ditions may lead to accidents, fire, or electric
shock.
● Park the vehicle in a safe location and apply
the parking brake to view the images on the
front center display screen using devices
connected to the auxiliary input jacks.
Do not attempt to operate the system in extreme
temperature conditions [below 24°F (220°C)
and above 158°F (70°C)]. Operating this system
under these conditions may result in system
malfunctions.
1. “
STATUS ” status display button (P. 4-7)
2, 6, 7, 8, 9. Navigation system control
buttons (Refer to the separate
Navigation System Owner’s
Manual.)
3. INFINITI controller (P. 4-4)
4. “
PHONE ” BluetoothT Hands-Free Phone
System button (P. 4-74)
5. “
OFF ” brightness control and dis-
play ON/OFF button (P. 4-7)
10. “
INFO ” vehicle and navigation informa-
tion button (P. 4-8)
11. “
SETTING ” button (P. 4-15)
12. “
AM·FM·SAT ” band selector button
(P. 4-34)
13. “
DISC·AUX ” selector button (P. 4-21)
With navigation system
SAA1800
SAFETY NOTE
CENTER MULTI-FUNCTION CONTROL PANEL
4-2
Monitor, climate, audio, phone and voice recognition systems
w
—
—
05/19/09—tbrooks
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
1. “
DISP ” display setting button
(P. 4-8, P. 4-16)
2. “
RADIO AM·FM ” band selector button
(P. 4-34)
3. INFINITI controller (P. 4-4)
4. “
STATUS ” status display button (P. 4-7)
5. “
OFF ” brightness control and
display ON/OFF button (P. 4-7)
6. “
TRIP ” trip computer button
(P. 4-8, P. 4-10)
7. “
FUEL ECON ” button (P. 4-8, P. 4-9)
8. “
AUX ” button (P. 4-21)
9. “
DISC ” selector button (P. 4-22)
10. “
INFO ” vehicle information button
(P. 4-8)
11. “
SETTING ” button (P. 4-15)
When you use this system, make sure the
engine is running.
If you use the system with the engine not run-
ning (ignition ON or ACC) for a long time, it will
use up all the battery power, and the engine will
not start.
Without navigation system
SAA1801
With navigation system
SAA1097
Without navigation system
SAA1098
Monitor, climate, audio, phone and voice recognition systems
4-3
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO USE INFINITI CONTROLLER
Choose an item on the display using the main
directional buttons
s
2
(or additional directional
buttons
s
6
with navigation system) or center
dial
s
3
, and push the
ENTER button
s
1
for
operation.
If you push the
BACK button
s
4
before the
setup is completed, the setup will be canceled
and/or the display will return to the previous
screen. This button can also be used to delete
characters that have been input.
After the setup is completed, push the
BACK
button
s
4
and return to the previous screen.
For the
VOICE button
s
5
functions, refer to the
separate Navigation System Owner’s Manual.
HOW TO USE TOUCH SCREEN (models
with navigation system)
CAUTION
● The glass screen on the liquid crystal display
may break if it is hit with a hard or sharp
object. If the glass breaks, do not touch the
liquid crystalline material, which contains a
small amount of mercury. In case of contact
with skin, wash immediately with soap and
water.
● To clean the display, never use a rough cloth,
alcohol, benzine, thinner or any kind of sol-
vent or paper towel with a chemical cleaning
agent. They will scratch or deteriorate the
panel.
● Do not splash any liquid such as water or car
fragrance on the display. Contact with liquid
will cause the system to malfunction.
To ensure safe driving, some functions cannot
be operated while driving.
The on-screen functions that are not available
while driving will be “grayed out” or muted.
Park the vehicle in a safe location and then
operate the navigation system.
Touch screen operation
With this system, the same operations as those
for the INFINITI controller are possible using the
touch screen operation.
Selecting the item :
Touch an item to select. To select the “Audio”
settings, touch the “Audio” area
s
1
on the
screen.
Touch the
BACK
s
2
button to return the previ-
ous screen.
SAA1802
4-4
Monitor, climate, audio, phone and voice recognition systems
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Adjusting an item :
Touch the +
s
1
or
2
s
2
button to adjust the
settings.
Touch the
UP
s
3
or
DOWN
s
4
button to move to
the previous or next page.
Inputting characters :
Touch the letter or number
s
1
.
There are some options available when input-
ting characters.
● Uppercase:
Shows uppercase characters.
● Lowercase:
Shows lowercase characters.
● Space:
Inserts a space.
● Symbols:
Shows symbols such as the question mark
(?).
● Delete:
Deletes the last character that has been
input with one touch. Push and hold the
button to delete all of the characters.
● OK:
Completes character inputs.
Touch screen maintenance
If you clean the display screen, use a dry, soft
cloth. If additional cleaning is necessary, use a
small amount of neutral detergent with a soft
cloth. Never spray the screen with water or
detergent. Dampen the cloth first, and then
wipe the screen.
SAA1543
SAA1617
Monitor, climate, audio, phone and voice recognition systems
4-5
w
—
—
05/14/09—pattie
X
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст