Infiniti M35/M45 Y50. Manual — part 1135
TRANSFER ASSEMBLY
TF-47
C
E
F
G
H
I
J
K
L
M
A
B
TF
7.
Remove rear oil seal from rear case, using the puller.
CAUTION:
Be careful not to damage the rear case.
8.
Remove spacer from mainshaft.
9.
Remove front case and rear case fixing bolts, then remove har-
ness bracket.
10. Separate front case and rear case. Then, remove front case by
levering it up with a tire lever or the like.
CAUTION:
Be careful not to damage the mating surface.
Tool number
: KV381054S0 (J-34286)
PDIA0259E
PDIA0260E
Bolts symbol
Quantity
Bolt length “
” mm (in)
A
11
42 (1.65)
B
1
162 (6.38)
C
1
97 (3.82)
TORX bolts
1
40 (1.57)
PDIA0251E
SDIA2460E
TF-48
TRANSFER ASSEMBLY
11. Remove snap ring from front case.
12. Remove mainshaft bearing from front case, using the drift.
13. Remove drive chain and front drive shaft while tapping front
drive shaft with plastic hammer.
CAUTION:
Be careful not to tap drive chain.
14. Remove oil gutter from rear case.
15. Remove oil cover bolt and sensor fixing bolt from rear case. And
then, remove oil cover.
NOTE:
Regarding models after december
′
06, temperature sensor may
not included.
PDIA0267E
Tool number
: KV38100300 (J-25523)
PDIA0256E
PDIA0257E
PDIA0261E
SDIA2403E
TRANSFER ASSEMBLY
TF-49
C
E
F
G
H
I
J
K
L
M
A
B
TF
16. Remove retainer from transfer assembly harness connector.
17. Remove transfer assembly harness connector from rear case.
18. Remove O-ring from transfer assembly harness connector.
19. Remove mainshaft assembly from rear case, using the drift.
20. Remove snap ring from rear case.
21. Remove rear bearing from rear case, using the drifts.
22. Remove baffle plate from rear case.
23. Remove breather tube from rear case.
SDIA1597E
Tool number
: ST33052000 (
—
)
PDIA0262E
PDIA0263E
Tool number
A: ST30611000 (J-25742-1)
B: ST35321000 (
—
)
PDIA0264E
SDIA1701E
TF-50
TRANSFER ASSEMBLY
Mainshaft Assembly
1.
Separate front case and rear case, then remove mainshaft assembly. Refer to
2.
Remove snap ring from mainshaft.
3.
Remove spacer from mainshaft.
4.
Remove electric controlled coupling and sprocket from main-
shaft.
5.
Remove needle bearing from mainshaft.
Front Drive Shaft and Drive Chain
1.
Separate front case and rear case. Refer to
TF-46, "Front Case and Rear Case"
2.
Remove drive chain and front drive shaft while tapping front
drive shaft with plastic hammer.
CAUTION:
Be careful not to tap drive chain.
3.
Remove front drive shaft front bearing, using the drift and puller.
4.
Remove front drive shaft rear bearing, using the drift and puller.
SDIA1602E
PDIA0257E
Tool number
: ST31214000 (J-25269-B)
PDIA0269E
Tool number
: ST31214000 (J-25269-B)
PDIA0270E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст