Infiniti M35/M45 Y50. Manual — part 1148
REMOVAL AND INSTALLATION
WT-39
C
D
F
G
H
I
J
K
L
M
A
B
WT
REMOVAL AND INSTALLATION
PFP:00000
Transmitter
NES000KM
REMOVAL
1.
Deflate tire. Unscrew transmitter retaining nut and allow transmitter to fall into tire.
2.
Gently bounce tire so that transmitter falls to bottom of tire.
Place on tire changing machine and break both tire beads
ensuring that the transmitter remains at the bottom of the tire.
3.
Turn tire so that valve hole is at bottom and bounce so that
transmitter is near valve hole. Carefully lift tire onto turntable and
position valve hole (and transmitter) 270 degree from mounting/
dismounting head.
4.
Lubricate tire well and remove first side of the tire. Reach inside
the tire and remove the transmitter.
INSTALLATION
1.
Put first side of tire onto rim.
2.
Mount transmitter on rim and tighten nut.
CAUTION:
Speed for tightening nut should be less than 10 rpm.
SEIA0047E
SEIA0048E
SEIA0049E
SEIA0521E
WT-40
REMOVAL AND INSTALLATION
3.
Place wheel on turntable of tire machine. Ensure that transmitter
is 270 degree from mounting head when second side of tire is
fitted.
NOTE:
Do not touch transmitter at mounting head.
4.
Lubricate tire well and fit second side of tire as normal. Ensure
that tire does not rotate relative to rim.
5.
Inflate tire and fit to appropriate wheel position.
Low Tire Pressure Warning Control Unit
NES000KN
REMOVAL
1.
Remove instrument driver lower panel. Refer to
IP-10, "INSTRUMENT PANEL ASSEMBLY"
.
2.
Remove fixing bolt (1), and then remove low tire pressure warn-
ing control unit (2) from vehicle.
INSTALLATION
Installation is the reverse order of removal.
Receiver
NES000KO
REMOVAL
1.
Remove tire from vehicle with a power tool.
2.
Remove fender protector from vehicle. Refer to
.
3.
Remove fixing bolt, then remove tire pressure receiver from vehicle.
INSTALLATION
Installation is the reverse order of removal. For tightening torque, refer to
SEIA0048E
SEIA0659E
1.
Tire pressure receiver front
2.
Tire pressure receiver rear
A. Front wheel house
B. Rear wheel house
, for the symbols in the figure.
SEIA0649E
SERVICE DATA AND SPECIFICATIONS (SDS)
WT-41
C
D
F
G
H
I
J
K
L
M
A
B
WT
SERVICE DATA AND SPECIFICATIONS (SDS)
PFP:00030
Road Wheel
NES000KP
Tire
NES000KQ
Unit: kPa (kg/cm
2
, psi)
Kind of wheel
Aluminum
For temporary use
Maximum radial runout limit
Lateral deflection
Less than 0.3 mm (0.012 in)
Less than 1.5 mm (0.059 in)
Vertical deflection
Less than 0.3 mm (0.012 in)
Less than 1.5 mm (0.059 in)
Maximum allowable unbalance
Dynamic (At rim flange)
Less than 7 g (0.25 oz) (one side)
Static (At rim flange)
Less than 14 g (0.49 oz)
Tire size
Air pressure
Front
Rear
245/40R19 94W
230 (2.3, 33)
230 (2.3, 33)
P245/45R18 96V
230 (2.3, 33)
230 (2.3, 33)
T145/80D17 107M
420 (4.2, 61)
420 (4.2, 61)
WT-42
SERVICE DATA AND SPECIFICATIONS (SDS)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст